Cob building
Cob, also known as cobb, is a building material that comprises subsoil, straw (or another fibrous organic material), water, and occasionally lime. There is evidence of cob being used for building construction purposes in prehistoric times in various parts of the world and it was used for centuries in the south-west of England. Cob building has experienced something of a revival in recent years as a form of sustainable construction.
Depending on the contents of the subsoil, sand or clay can be added to achieve the best possible mixture for building. For example, traditional English cob, which was used up until the 1800s when it began to be replaced by more modern construction methods, was a mixture of clay-based subsoil, sand, straw and water.
Building with cob is a labour-intensive process, which may begin with shovelling or stamping together the cob mixture in foundation courses. The foundation must be wider than the wall, typically by around 300 mm, and sufficiently deep for the load requirements.
Cob walls are laid in courses, each one being left to completely dry before the next one is laid. In this way, the walls are built up steadily, tapering slightly as they rise. As cob is strong in terms of load-bearing, two-storey buildings are possible. Windows and doors can be either embedded as the walls are built up, either using lintels to support the top, or cut out when fully complete. One of the advantages of using cob is that the walls can be built up to any shape required, making it very flexible in terms of design.
Traditionally, thick walls (approximately 60 cm) have provided good thermal mass, which retains heat in cold seasons and keeps the interior cool in hot seasons. It also provides excellent thermal insulation, generally exceeding minimum U-values for domestic buildings.
A suitable roof overhang is necessary to protect the cob walls and foundation from moisture. At least 200 mm overhang is typical. If vertical cracks develop, cob or clay tiles can be used to fix them before moisture penetration risks damaging the wall. Cob walls are traditionally left bare or rendered with lime to allow them to dry out naturally after becoming wet.
Cob is fire-proof, resistant to seismic activity, and tends to be inexpensive, albeit time-consuming.
[edit] Related articles on Designing Buildings
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
The heritage of nuclear and conventional power stations.
New measures to stop people being ripped off
Government to protect families from cowboy builders and aggressive bailiffs.
New Futurebuild showcase brings an innovation-first approach.
National Planning Policy Framework
Understanding the 2026 changes.
ECA's public affairs priorities
Member consultation opens to shape priorities for 2027 to 2030.
Dutyholder responsibilities from 1 July 2026.
Where performance meets practice
The Building Envelope Stage at UKCW Birmingham.
CIAT publishes briefing on planning reforms.
Leaders in Learning for Practice Network
Call for conservation leaders in learning to register interest in new network.
The importance of early engagement
Construction lessons from the Trillium HealthWorks Experience Centre.
Mayors are to be given planning call in powers
Mayors across England will be able to make the most important planning decisions.
The Master Builder: William Butterfield and his times. Book review.

















