Bitumen binder may delay road surface deterioration
Contents |
[edit] Introduction
A bitumen binder made from a blend of materials may help increase the life of road surfaces. The product, Styrelf Long Life, is made by TOTAL UK. It is being mixed with asphalt in a trial being conducted on a section of the A43 near Silverstone in Northamptonshire. The test is being overseen by Highways England with support from Tarmac. The trial began in April 2021 and is expected to last up to 15 years.
[edit] Product information
Styrelf Long Life is formulated to make road surfaces more resistant to the elements. Roads made from Styrelf oxidise at a slower rate and so should stay flexible and crack-free for longer periods of time. It offers high elastic recovery and withstands repeated loading to provide resistance from wear.
It is a polymer-modified binder (PMB) bitumen that is produced by cross linking bitumen and thermoplastic elastomers. This results in an in-situ, three-dimensional polymer bitumen matrix with a homogenous microstructure suitable for extreme environments.
Styrelf has been tested in the laboratories of TOTAL, at Tarmac’s site in Elstow in Bedfordshire and on sections of road in The Netherlands and Germany. The A43 trial is the first time it has been used with high traffic levels in the UK.
[edit] Environmental aspects
By helping to slow the need for frequent repairs and maintenance, the Styrelf treated surfaces could help cut carbon emissions by reducing the demand for replacement materials - as well as the disruption of traffic. TOTAL estimates that getting the asphalt required to resurface a mile of single lane carriageway - not including transport to site and working with it - can produce up to 26.5 tonnes of CO2.
Technical experts from TOTAL will regularly measure the performance of the material against an equivalent control section put in place at the same time on the A43. Test results will be evaluated before its use is considered elsewhere in the country.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Villa Wolf in Gubin, history and reconstruction. Book review.
Construction contract awards down £1bn
Decline over the past two months compared to the same period last year, follows the positive start to the year.
Editor's broadbrush view on forms of electrical heating in context.
The pace of heating change; BSRIA market intelligence
Electric Dreams, Boiler Realities.
New President of ECA announced
Ruth Devine MBE becomes the 112th President of the Electrical Contractors Association.
New CIAT Professional Standards Competency Framework
Supercedes the 2019 Professional Standards Framework from 1 May 2025.
Difficult Sites: Architecture Against the Odds
Free exhibition at the RIBA Architecture Gallery until 31 May.
PPN 021: Payment Spot Checks in Public Sub-Contracts
Published following consultation and influence from ECA.
Designing Buildings reaches 20,000 articles
We take a look back at some of the stranger contributions.
Lessons learned from other industries.
The Buildings of the Malting Industry. Book review.
Conserving places with climate resilience in mind.
Combating burnout.
The 5 elements of seiri, seiton, seiso, seiketsu and shitsuke.
Shading for housing, a design guide
A look back at embedding a new culture of shading.
The Architectural Technology Awards
The AT Awards 2025 are open for entries!
ECA Blueprint for Electrification
The 'mosaic of interconnected challenges' and how to deliver the UK’s Transition to Clean Power.