Automatic Meter Reading (AMR)
Automated Meter Reading (AMR) relates to the use of a device which communicates resource consumption information (normally energy, gas or water) measured by a meter to a supplier. It is normally one directional, in that the meter communicates only for example with an energy supplier, say once a month reporting the amount of energy being used.
These devices avoid manual reading which can be time-consuming, unreliable or difficult to achieve, if for example water meters are located in difficult to access areas, or occupants are unavailable to give access. AMRs can normally be installed alongside existing meters, rather than requiring a new meter entirely, communicating measurements, potentially without an Internet connection.
Advanced Meter Integration (AMI) describes a smarter system that relies on a newer smarter meters to replace existing ones. These communicate data in real-time to whatever specification is required. This is the precursor to what we commonly now call the smart meter, which can be a two way device, most commonly used to measure, assess and track commercial or residential energy use. Some AMRs today however have similar functionalities as smart meters.
The AMR was first patented in 1974 by T.Paraskevakos who developed radio based fire, security and medical alarm systems for Boeing before the internet enabled wi-fi accessible devices. The first commercially available system was launched in 1977 by Metretek.
AMR's, AMI and smart meters are often key components in Measurement and Verification (M&V) of resource (especially energy) consumption for individual buildings or facilities and in the implementation, testing and assessment of Energy Conservation Measures (ECMs) of those facilities.
[edit] Related articles on Designing Buildings
Featured articles and news
Inspiring the next generation to fulfil an electrified future
Technical Manager at ECA on the importance of engagement between industry and education.
Repairing historic stone and slate roofs
The need for a code of practice and technical advice note.
Environmental compliance; a checklist for 2026
Legislative changes, policy shifts, phased rollouts, and compliance updates to be aware of.
UKCW London to tackle sector’s most pressing issues
AI and skills development, ecology and the environment, policy and planning and more.
Managing building safety risks
Across an existing residential portfolio; a client's perspective.
ECA support for Gate Safe’s Safe School Gates Campaign.
Core construction skills explained
Preparing for a career in construction.
Retrofitting for resilience with the Leicester Resilience Hub
Community-serving facilities, enhanced as support and essential services for climate-related disruptions.
Some of the articles relating to water, here to browse. Any missing?
Recognisable Gothic characters, designed to dramatically spout water away from buildings.
A case study and a warning to would-be developers
Creating four dwellings... after half a century of doing this job, why, oh why, is it so difficult?
Reform of the fire engineering profession
Fire Engineers Advisory Panel: Authoritative Statement, reactions and next steps.
Restoration and renewal of the Palace of Westminster
A complex project of cultural significance from full decant to EMI, opportunities and a potential a way forward.
Apprenticeships and the responsibility we share
Perspectives from the CIOB President as National Apprentice Week comes to a close.
The first line of defence against rain, wind and snow.
Building Safety recap January, 2026
What we missed at the end of last year, and at the start of this.






















Comments
[edit] To make a comment about this article, or to suggest changes, click 'Add a comment' above. Separate your comments from any existing comments by inserting a horizontal line.