Why do buildings crack? (DG 361)
BRE (Building Research Establishment) is an independent, research-based consultancy, testing and training organisation, operating in the built environment and associated industries.
Why do buildings crack? (DG 361) was first published by BRE in May 1991, and the original content largely remains valid. The current edition was published on 21 August 2014 and includes updated references. It was written by Roger Sadgrove.
Most buildings develop cracks in their fabric, often soon after construction when materials are drying out, but sometimes later. Most early cracking is not structurally significant and is easily repaired. Only rarely does cracking indicate a reduction in structural capacity.
However, diagnosis can be difficult, as every building is unique and several factors may combine to produce a defect. DG 361 examines the causes of cracking in buildings, describes a wide range of potential problems and offers complete solutions to every cracking problem. It is intended to broaden the reader’s understanding of the factors that contribute to cracking and so increase the likelihood of correct diagnosis and remediation.
It provides guidance about how to avoid pitfalls and how to reduce the likelihood of future problems in new buildings.
The contents of the 12 page digest are:
- Introduction.
- Extent of movement.
- The effect of movements: how do cracks occur?
- Diagnosis.
- Temperature changes.
- Initial drying out of moisture and wetting and drying.
- Loss of volatiles.
- Freezing and thawing of absorbed water.
- Subsurface crystallisation of soluble salts.
- Sulfate attack.
- Corrosion or oxidation of steel.
- Moisture expansion of fired clay products.
- Carbonation.
- Alkali silica reaction.
- Hydration of oxides and unstable clinker aggregates.
- Imposed load effects.
- Foundation movement.
- Vibration.
- References.
[edit] Related articles on Designing Buildings Wiki
- BRE articles on Designing Buildings Wiki.
- BRE Buzz articles on Designing Buildings Wiki.
- BRE Buzz.
- Building Research Establishment.
- Burland scale
- Cracking and building movement.
- Cracking in buildings.
- Defects in brickwork.
- Defects in construction.
- Defects in dot and dab.
- Defects in stonework.
- Foundations.
- Ground heave.
- Latent defects.
- Leaning Tower of Pisa.
- Preventing wall collapse.
- Pyrite and mica redress issues in Dail Eireann.
- Repointing.
- Settlement.
- Sinkholes.
- Subsidence.
- Underpinning.
Featured articles and news
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
New project and cultural district described in detail.
The nature of EPCs, crticism and inaccuracies.
History, issues and redesign.
From waste recycling to energy performance the hierchy.
An introduction to WERCS and WEEE responsibilities
Dealing with 2 million tonnes of waste equipment a year.
Global BACS Market: analytics and optimisation
A BSRIA glance at building automation and control systems.
What it is and how to use it.
Types of insulating plaster by binder and insulant.
Investors in People: CIOB achieves gold
Reflecting a commitment to employees and members.
Scratching beneath the surface; a guide to selection.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.
For the World Autism Awareness Month of April.