Point load
A point load is a load that is applied at a specific, concentrated point, sometimes referred to as equivalent concentrated load (ECL). This is in contrast to loads such as uniformly distributed loads (UDL), where the the load is distributed across a region of an element such as a beam or slab.
For example, when a point load is imposed on a shelf, its weight is significantly concentrated in one place. On the other hand, when a UDL is placed on a shelf, its weight is evenly distributed over the entire shelf.
Point loads are expressed by calculating the total load over the object's surface or length and attributing the entire load to its centre point.
Other related types of load include
- Coupled loads
- Dead loads
- Line loads
- Live loads
- Uniformly varying loads.
For more information see: Types of structural load.
[edit] Related articles on Designing Buildings
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
The hidden risk in modern construction supply chains.
Construction Management, 10 June
24 months to 14: CITB launches accelerated apprenticeships.
Bridging the gap between clients and contractors
Concerns remain around contractor quality, capability, and delivery.
Construction Management, 10 June.
Heat pumps beat boilers in new home tests.
Building Safety Act implementation in Wales
CIAT to host industry panel on 26 June.
New and updated CLC building safety guidance.
New UK National Buildings Database.
Building Safety Wiki Interviews
Chief executive of the British Woodworking Federation.
Planning condition discharge in England and Wales
A brief explanation from a building compliance expert, with further links.
Overheating guidance and tools for building designers
Guidance for dealing with element of building fabric control that have increasing importance.
Shading for housing, a design guide
From the Good Homes Alliance and British Blind and Shutter Association.