Sacrificial timber
The term ‘sacrificial timber’ refers to timber in a structural assembly that is intentionally oversized in order to enhance its fire resistance. Timber burns at a regular and measurable rate, so exposed timber sections can be designed with an additional 'sacrificial' element (ie increased width and/or depth) that will char slowly and protect the inner, structural timber from fire damage.
Sacrificial timber can be a design solution if a solid timber member is to be exposed – either fully or partly – or if full fire resistance cannot be provided by plasterboard (or other) fire insulating materials.
The outer surface of a timber element will typically char in a fire, with temperatures in excess of 350°C necessary for flaming to occur. The charred portion of the timber then acts as an insulator and, although some will be irreparably damaged (or ‘sacrificed’), the core timber retains its stability and structural integrity.
The density, and therefore the charring rate, of the timber element will determine the required quantity of sacrificial timber. BS EN 1995-1-2:2004 provides charring rates for different timber materials for the purposes of informing initial design.
Notional charring rates (the charring rates apply to each face exposed to fire):
MATERIAL | CHARRING RATE ßn (mm/min) |
Softwood timber | 0.8 |
Softwood glulam and laminated veneer lumber (LVL) | 0.7 |
Hardwood timber and hardwood glulam | 0.55 |
For example, if a softwood element is exposed on all four of its sides to 20 minutes of fire:
2 x 20 x 0.8 = 32 mm
The width and depth of the element would require 32 mm of sacrificial timber.
[edit] Find out more
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
A distinct type of countryside that should be celebrated.
Should Part O be extended to existing buildings?
EAC brands heatwave adaptation a missed opportunity.
Definition of Statutory in workplace and facilities management
Established by IWFM, BESA, CIBSE and BSRIA.
The general election and the construction industry
As PM, Rishi Sunak announces July 4 date for an election.
Tackling the lack of knowledge or confidence in heat pumps
The CICV Green Home Festival part of the Edinburgh Fringe.
Home improvements swapped for green energy upgrades
As applications down since and desire to reduce bills up.
Eco apprenticeships continue help grow green workforce
A year after being recognised at the King's coronation.
The Use of Natural Insulation Materials in Retrofit
New paper from STBA with support from SDF.
National Retrofit Hub in partnership with InstallerSHOW.
Permitted development rights for agricultural buildings
The changes coming into effect as of May 21, 2024.
Biodiversity and the built environment digital series
The nature of building, with CIOB and CWP.
A call for prevention and sensitive re-use.
Risks to the long-term effectiveness of the BNG scheme
National Audit Office publish review of Biodiversity Net Gain.
The CIAT principal designer register
Providing assurance and verification of the capability and competence of registered ATs.
Scottish Government action to reach net-zero targets
Retrofit expert group highlight critical actions needed.