Burland scale
The Burland Scale is used to describe or measure the damage (or risk of damage) to properties as a result of changes such as subsidence. It may be used for example to assess the risk of damage as part of a basement impact assessment.
It categorises the damage to properties as:
- Visual appearance or aesthetics.
- Serviceability and function.
- Stability.
Where:
- Categories 0, 1, and 2 refer to (i) aesthetic damage.
- Category 3 and 4 relate to (ii) serviceability and function.
- Category 5 relates to (iii) stability.
Category of damage | Description of typical damage | Approximate crack width (mm) | Limiting tensile strain εlim (%) |
0 Negligible | Hairline cracks of less than about 0.1 mm are classed as negligible | <0.1 | 0.0-0.05 |
1 Very slight | Fine cracks that can easily be treated during normal decoration. Perhaps isolated slight fracture in building. Cracks in external brickwork visible on inspection | <1 | 0.05-0.075 |
2 Slight | Cracks easily filled. Redecoration probably required. Several slight fractures showing inside of building. Cracks are visible externally and some repointing may be required externally to ensure weathertightness. Doors and windows may stick slightly. | <5 | 0.075-0.15 |
3 Moderate | The cracks require some opening up and can be patched by a mason. Recurrent cracks can be masked by suitable lining. Repointing of external brickwork and possibly a small amount of brickwork to be replaced. Doors and windows sticking. Service pipes may fracture. Weathertightness often impaired. | 5-15 or a number of cracks > 3 | 0.15-0.3 |
4 Severe | Extensive repair work involving breaking-out and replacing sections of walls, especially over doors and windows. Windows and frames distorted, floor sloping noticeably. Walls leaning or bulging noticeably, some loss of bearing in beams. Service pipes disrupted. | 15-25 but also depends on number of cracks | >0.3 |
5 Very severe | This requires a major repair involving partial or complete rebuilding. Beams lose bearings, walls lean badly and require shoring. Windows broken with distortion, Danger of instability. | Usually > 25 but depends on number of cracks |
[edit] Related articles on Designing Buildings Wiki:
Featured articles and news
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
New project and cultural district described in detail.
The nature of EPCs, crticism and inaccuracies.
History, issues and redesign.
From waste recycling to energy performance the hierchy.
An introduction to WERCS and WEEE responsibilities
Dealing with 2 million tonnes of waste equipment a year.
Global BACS Market: analytics and optimisation
A BSRIA glance at building automation and control systems.
What it is and how to use it.
Types of insulating plaster by binder and insulant.
Investors in People: CIOB achieves gold
Reflecting a commitment to employees and members.
Scratching beneath the surface; a guide to selection.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.