Mechanical interlock
Structural Fixings for Ductwork Systems BG 10/2010, By Glenn Hawkins, Published by BSRIA in 2010, states in relation to the working principles of structural fixings: ‘Keying (or mechanical interlock) is the working principle of screws and undercut anchors. As a self-tapping concrete screw is driven into a pre-drilled hole, it keys into the structural base material. An undercut anchor keys into the base material as it is tightened to a specified torque. Hole depth, hole diameter and anchor embedment depth are key criteria that affect performance of these fixings. Keying is also one of the key working principles of direct fastening systems, which drive hardened nails into the structural base material using specialist power tools. Direct fastening also uses bonding and clamping principles too.’
--BSRIA
[edit] Related articles on Designing Buildings
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
National Planning Policy Framework
Understanding the 2026 changes.
ECA's public affairs priorities
Member consultation opens to shape priorities for 2027 to 2030.
Dutyholder responsibilities from 1 July 2026.
Where performance meets practice
The Building Envelope Stage at UKCW Birmingham.
CIAT publishes briefing on planning reforms.
Leaders in Learning for Practice Network
Call for conservation leaders in learning to register interest in new network.
The importance of early engagement
Construction lessons from the Trillium HealthWorks Experience Centre.
Mayors are to be given planning call in powers
Mayors across England will be able to make the most important planning decisions.
The Master Builder: William Butterfield and his times. Book review.
Why construction can't afford to ignore the skills gap.
Building Safety Regulator, 19 August
Gill Kernick appointed Independent Chair of Residents’ Panel.
Connecting knowledge, technology and conservation
Building competence for the future of built heritage.