Installed capacity of a fixed building service per unit area
Installed capacity refers to the maximum output that a system, typically related to energy generation or consumption, can produce under optimal conditions. This is commonly used in reference to renewable energy installations (such as solar panels or heat pumps), combined heat and power (CHP) systems, or battery storage capacity within a building.
Approved document L, Conservation of Fuel and Power, Volume 2: Buildings other than dwellings, 2021 edition incorporating 2023 amendments, defines the installed capacity of a fixed building service per unit area as: ‘The design output of the distribution system output devices (the terminal units) serving the space in question, divided by the total useful floor area of that space.’
See also: Installed capacity.
[edit] Related articles on Designing Buildings
- Approved document L.
- Approved documents.
- Building regulations.
- Energy.
- Fuel.
- Heating.
- Hot water.
- Installed capacity.
- Power.
Featured articles and news
Change of use legislation breaths new life into buildings
A run down on Class MA of the General Permitted Development Order.
Solar generation in the historic environment
Success requires understanding each site in detail.
Level 6 Design, Construction and Management BSc
CIOB launches first-ever degree programme to develop the next generation of construction leaders.
Open for business as of April, with its 2026 prospectus and new pipeline of housing schemes.
The operational value of workforce health
Keeping projects moving. Incorporating unplanned absence and the importance of health, in operations.
A carbon case for indigenous slate
UK slate can offer clear embodied carbon advantages.
Costs and insolvencies mount for SMEs, despite growth
Construction sector under insolvency and wage bill pressure in part linked to National Insurance, says report.
The place for vitrified clay pipes in modern infrastructure
Why vitrified clay pipes are reclaiming their role in built projects.
Research by construction PR consultancy LMC published.
Roles and responsibilities of domestic clients
ACA Safety in Construction guide for domestic clients.
Fire door compliance in UK commercial buildings
Architect and manufacturer gives their low down.
The new towns and strategic environmental assessments
12 locations of the New Towns Taskforce reduced to 7 within the new towns draft programme and open consultation.
Buildings that changed the future of architecture. Book review.