How to waterproof a rooflight
[edit] Introduction
There are many reasons why a rooflight might start leaking. It could be the result of an inadequate installation, or the rooflight may have been damaged after being exposed to high winds or suffering an impact. In some cases, a leak can even turn out to be not a leak at all, but a condensation problem.
Even a small leak can be a source of inconvenience for a building’s occupants, and it could damage expensive equipment or decorations. Problems such as damp and mould can also result from a leaking rooflight, leading to uncomfortable conditions and potential health hazards.
[edit] Methods for waterproofing rooflights
As with any type of building penetration, there are several ways to waterproof a rooflight, and the right choice will depend on the roof construction, as well as the finished appearance that you wish to achieve.
In residential buildings with pitched roofs, for example, rrooflight installations are typically sealed using flashings with tiles layered carefully over the top for a weatherproof finish.
However, this method will not work on most commercial buildings – particularly those with flat or low-pitched roofs and no roof tiles. So other techniques will be required. Although a waterproof rooflight can be achieved with materials such as EPDM rubber, or even traditional roofing felt, GRP is one of the best ways to ensure a leak-free result that will look good and last for many years with minimal maintenance.
[edit] Related articles on Designing Buildings
Featured articles and news
The UK’s largest air pollution campaign.
Future Homes Standard, now includes solar, but what else?
Will the new standard, due to in the Autumn, go far enough in terms of performance ?
BSRIA Briefing: Cleaner Air, Better tomorrow
A look back at issues relating to inside and outside air quality, discussed during the BSRIA briefing in 2023.
Restoring Abbotsford's hothouse
Bringing the writer Walter Scott's garden to life.
Reflections on the spending review with CIAT.
Retired firefighter cycles world to raise Grenfell funds
Leaving on 14 June 2025 Stephen will raise money for youth and schools through the Grenfell Foundation.
Key points for construction at a glance with industry reactions.
Functionality, visibility and sustainability
The simpler approach to specification.
Architects, architecture, buildings, and inspiration in film
The close ties between makers and the movies, with our long list of suggested viewing.
SELECT three-point plan for action issued to MSPs
Call for Scottish regulation, green skills and recognition of electrotechnical industry as part of a manifesto for Scottish Parliamentary elections.
UCEM becomes the University of the Built Environment
Major milestone in its 106-year history, follows recent merger with London School of Architecture (LSE).
Professional practical experience for Architects in training
The long process to transform the nature of education and professional practical experience in the Architecture profession following recent reports.
A people-first approach to retrofit
Moving away from the destructive paradigm of fabric-first.
International Electrician Day, 10 June 2025
Celebrating the role of electrical engineers from André-Marie Amperè, today and for the future.
New guide for clients launched at Houses of Parliament
'There has never been a more important time for clients to step up and ...ask the right questions'
The impact of recycled slate tiles
Innovation across the decades.
EPC changes for existing buildings
Changes and their context as the new RdSAP methodology comes into use from 15 June.