Design metrics
The RIBA Passivhaus Overlay, published by the RIBA in 2022, states in relation to design metrics: “To inform the design process each building type and site will have an optimal range of useful Design Metrics, generally including, although not limited to, parameters such as form factor, glazing ratio, ventilation rate, length of intake/exhaust ductwork, internal gains etc. Each building typology has an optimal range of factors, ratios, rates etc. and thus early prototyping and options analysis by means of the PHPP model during RIBA Stages 1 and 2 helps the design team to identify and develop these metrics so that the design process can be expedited, costly redesign can be avoided, and construction budgets can be met.”
[edit] Related articles on Designing Buildings
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
Where performance meets practice
The Building Envelope Stage at UKCW Birmingham.
CIAT publishes briefing on planning reforms.
Leaders in Learning for Practice Network
Call for conservation leaders in learning to register interest in new network.
The importance of early engagement
Construction lessons from the Trillium HealthWorks Experience Centre.
Mayors are to be given planning call in powers
Mayors across England will be able to make the most important planning decisions.
The Master Builder: William Butterfield and his times. Book review.
Why construction can't afford to ignore the skills gap.
Building Safety Regulator, 19 August
Gill Kernick appointed Independent Chair of Residents’ Panel.
Connecting knowledge, technology and conservation
Building competence for the future of built heritage.
Building Regulations and Building Safety Act
CIOB publishes free advice for non-domestic clients.
Building Safety Newsletter from MHCLG.
An extraordinary record of steel engineering worldwide.
Comments
[edit] To make a comment about this article, or to suggest changes, click 'Add a comment' above. Separate your comments from any existing comments by inserting a horizontal line.