Chainage
The term 'chainage' is used in surveying to refer to a distance measured in metres along an imaginary line, such as the centre line of a road or railway.
The term originated in 1620, when 66 feet chains (Gunter’s chains, named after mathematician Edmund Gunter) were first used to for the measurement of linear features such as roads or railways. The chain typically included 100 links, and 10 square chains was 1 acre. Cricket pitches are also generally 1 chain long, and a mile is 80 chains.
Ramsden's chains were longer chains of 100 feet developed in the 18th century.
Whilst this technique is no longer used, the name has remained, in particular in relation to railways, where it may be used to define the location of bridges and stations. A datum will be set as 0 at one point along the railway, and cumulative longitudinal distances measured using a device such as an odometer and then quoted along the length of the railway from that datum. This is generally sufficient to uniquely identify features such as bridges and stations.
[edit] Related articles on Designing Buildings
Featured articles and news
UK Construction Week, London is here !
Debuting major international pavilions and much more.
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
New project and cultural district described in detail.
The nature of EPCs, crticism and inaccuracies.
History, issues and redesign.
From waste recycling to energy performance the hierchy.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.
Comments
Thank you for the article. I work in the water industry and chainage seems to always refer to the distance on plan, neglecting the vertical component. I'm curious, are there standard terms for change that includes the vertical component of the ground and out of the pipeline, tunnel etc that is being constructed? Given the history the original chainage measurements would have included the vertical component of the ground. Was there/is there a different term for the chainage measurement of the ground before work began, and the finished chainage with cuttings and embankments in place? Many thanks