Angular selective
Angular Selectivity is a special case of angular dependence. Angle dependant performance simply means that the relevant property, for example, the transmittance through or reflectance from an illuminated surface takes on different numerical values for different angles of incidence.
The angle of incidence, which is often designated "theta” is the angle subtended between the normal or perpendicular plane to a given surface and a ray of incoming (incident) light. A common example is that any ordinary pane of clear glass will have its highest transmittance value (and lowest reflectance value) for theta = 0° and its lowest transmittance value (namely zero) and highest reflectance value for theta = 90°.
To define Angular Selectivity, we need to introduce a second angle, namely an azimuthal angle or "phi", which describes rotation around the surface normal in a plane parallel to the surface. It is only of interest if the surface is not homogeneous but has some structure which varies according to the azimuthal angle.
Taking a vertically mounted projection and defining the upward direction by phi = 0°, we have angle selective behaviour, because the transmittance for a given fixed theta value is different for different phi values. Using a lamella or louvre array as an example, when theta = 40 ° and phi = 0°, the transmittance is quite low, whereas for theta = 10° and phi = 180°, the transmittance is higher.
If different amounts of light are transmitted, for the same angle of incidence theta, depending on whether the light comes from above or below then the sample is angle selective. By contrast, a homogeneous material like a pane of clear glass is not angle selective; it always has the same transmittance value for a given theta, independent of the value of phi.
[edit] Related articles on Designing Buildings.
Featured articles and news
The general election and the construction industry
As PM, Rishi Sunak announces July 4 date for an election.
Tackling the lack of knowledge or confidence in heat pumps
The CICV Green Home Festival part of the Edinburgh Fringe.
Home improvements swapped for green energy upgrades
As applications down since and desire to reduce bills up.
Eco apprenticeships continue help grow green workforce
A year after being recognised at the King's coronation.
The Use of Natural Insulation Materials in Retrofit
New paper from STBA with support from SDF.
National Retrofit Hub in partnership with InstallerSHOW.
Permitted development rights for agricultural buildings
The changes coming into effect as of May 21, 2024.
Biodiversity and the built environment digital series
The nature of building, with CIOB and CWP.
A call for prevention and sensitive re-use.
Risks to the long-term effectiveness of the BNG scheme
National Audit Office publish review of Biodiversity Net Gain.
The CIAT principal designer register
Providing assurance and verification of the capability and competence of registered ATs.
Building Safety recommendations and Northern Ireland
The NI roadmap to improving safety in high rise residential.
Specifying rendered external wall insulation for fire safety
How to interrogate the evidence provided to the specifier.
The benefits of writing articles for your organisation
How to create a profile for your organisation and publish for free.
Scottish Government action to reach net-zero targets
Retrofit expert group highlight critical actions needed.
A forward thinking, inclusive global community of members.