Laminated strand lumber LSL
Engineered wood products and an introduction to timber structural systems, published by the Structural Timber Association, defines laminated strand lumber as: ‘a structural member made by cutting long thin strands approximately 300mm long and 0.8mm - 1.3mm thick directly from debarked logs. The strands are blended, coated with adhesive and oriented so that they are essentially parallel to the longitudinal axis of the section before being reformed by steam-injection pressing into a solid section. LSL is used in similar applications to laminated veneer lumber (LVL)’.
[edit] Related articles on Designing Buildings
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
Your guide to The Construction Reset at UKCW Birmingham.
Accommodating the Victorian and Edwardian working woman. Book review.
Rethinking passive fire protection in design
PFP demands the same level of design rigour as structure or services.
38% of Gen Zs feel safe when a fire door is wedged open.
Stunning images from around the world
Shortlist for CIOB’s Art of Building photography competition.
Guidance for conversion of traditional pre-1919 stone buildings.
Industrial heritage in the Ruhr
A marked difference to the fate of industrial landscapes in the UK.
Communities will be able to build their own clean energy.
Why diversity and inclusion matters for SMEs
CIOB’s D&I Charter shows how practical changes can support long-term growth.
Cut electricity bills to power growth
Coalition sends joint letter to the Chancellor.
Gasholders: a history in pictures. Book review.
Recognition, influence and growth
SocEnv identifies three strategic pillars in new strategy to 2045.