Ablative material
Ablative materials in design and construction, are materials that are generally resistant to high temperatures and used for thermal protection, such as an ablative batt. Ablation itself means the removal or destruction of something, normally the upper layer by chipping, erosion, decomposition or vaporisation, and so might be referred to as a sacrificial layer.
There are in effect three types of ablative materials, which relate to the way the react to heat;
Contents |
[edit] Subliming ablators
Subliming ablators, act as heat sinks until the surface reaches sublimation or melting point (thus also referred to as - subliming / melting ablators), thus removing the heat from the protected object. In some cases a layer of gas is formed which helps remove heat from the object, in other cases an endothermic reaction occurs increasing the material temperature whilst decreasing the surrounding temperature, sacrificially. In doing this ablative materials may pyrolyse mitigating a heat load, so in effect they decompose or change as a result of the heat being applied. These types of materials are often carbon related composites such as Teflon.
[edit] Charring ablators
Charring ablators, partially burn and blacken, creating a greater surface thermal resistance. For example in a char rating, which measures the depth of char of a timber being burnt, divided by the time period for this to occur, where a lower char rate indicates a slower rate of burn. Charring ablation describes where the surface chemical reaction (decomposition at high temperature) gradually consumes the char layer of the material, so is completely decomposed.
[edit] Intumescent ablators
Intumescent ablators, swell as a result of heat exposure, which leads to an increase in the volume and decrease in density. Intumescence refers to the process of swelling and the most common examples in construction are known as Intumescence strips, used in fire proofing.
[edit] Related articles on Designing Buildings
Featured articles and news
Open industry engagement survey seeks responses
Institutions and the importance of engagement.
National Retrofit Hub unveils new guide
Digital Building Logbooks and Retrofit: An Introduction.
Top 50 firms awarded 52bn of projects in the last year
New engineering data shows.
Enhancing construction site reporting efficiency
Through digitisation and the digital revolution.
Noise in the built environment
BSRIA guide TG 20/2021.
17,000 people suffer conditions as a result of exposure to excessive noise at work.
Turning down the noise: Auditory health
A pervasive risk with far-reaching consequences.
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
Comments
[edit] o make a comment about this article, click 'Add a comment' above. Separate your comments from any existing comments by inserting a horizontal line.