About IG Masonry Support
The most practical and advanced range of Masonry Support products on the market
IG Masonry Support has combined experience with innovation to provide the most practical and advanced range of Masonry Support products on the market. Offering optimum performance and design flexibility, IG Masonry Support has also developed a revolutionary brick on soffit system which radically reduces on site labour. IG provides comprehensive technical support for all our masonry support products. Our free scheduling and specification service offers fast turnaround on masonry support and windpost systems.
Our experienced team of over forty structural and civil engineers offer a free design service and on-site support offering a range of off the shelf and bespoke solutions.
Contents |
[edit] Products
[edit] IG Keyfix
|
Keyfix is setting new standards in the delivery of non-combustible (NC) cavity systems for projects requiring Document B compliance in buildings over 18m high utilising steel frame systems in the external cavity. Our innovative NC range of A1 fire rated cavity trays is a practical solution to provide DPC protection over lintels, masonry supports, soffit systems and other elements in the cavity such as fire barriers etc. |
[edit] IG Brick On Soffit System (B.O.S.S +®)
|
B.O.S.S.+ is an innovative lightweight Brick Slip Soffit System, with the added security of mechanically fixed brick slips. An extension of the Brick On Soffit System (B.O.S.S.), this BBA certified unit is suitable for use on residential buildings over 18m above ground level and complies with the Building Regulations 2010* Approved Document B:Fire Safety. |
[edit] IG Brick On Soffit System (B.O.S.S +®)
|
The B.O.S.S.® range provides a lighter alternative to concrete, which is faster to install than traditional hanging brick systems. Installed to a pre-fitted masonry support system, B.O.S.S.® allows increased adjustability along three axes. Produced offsite, B.O.S.S.® offers a quicker, lighter, easier and more cost efficient option. |
[edit] IG Titan System
|
IG’s Titan System is designed to meet with the industry’s demand for speed of construction. All configurations are available ex-stock meeting all the builder’s needs. This system offers a range of bracket sizes to accommodate various cavity widths. IG Titan is a fully adjustable system accommodating loads up to 14 kN/m. |
[edit] IG Welded Masonry Support
|
A rigid Masonry Support System manufactured bespoke to accommodate projects with very specific requirements, eg. reduced cavity widths or increased loading. IG’s Welded Shelf Systems are fabricated to engineer specifications and design assistance will be provided by the IG technical team. |
[edit] IG Brick Slip Lintels
|
IG’s Brick Slip Lintels can be used over small openings and eliminate the need for additional masonry supports. Supplied in stainless steel or galvanised steel, IG’s Brick Slip Lintels have the same profile as a standard lintel and are delivered to site as a one piece unit complete with brick slips attached eliminating the need for specialist installation on-site. |
[edit] IG Brick Slip Masonry Support
|
IG’s Brick Slip Masonry Support Systems are one piece prefabricated units manufactured off-site and delivered to site complete with bricks bonded to them. This system offers a major reduction in on-site labour and installation time. All solutions are customised to your requirements. IG’s bespoke components use our patented adhesion system and are delivered to site as a complete unit ready for installation. |
[edit] IG Brick Slip Soffit Panels
|
IG’s Brick Slip Masonry Support Systems are one piece prefabricated units manufactured off-site and delivered to site complete with bricks bonded to them. This system offers a major reduction in on-site labour and installation time. All solutions are customised to your requirements.IG’s bespoke components use our patented adhesion system and are delivered to site as a complete unit ready for installation. |
For more information please contact us.
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
Channel 4 broadcaster to host 125th anniversary ceremony.
Listed structures on the rail network
Heritage interests and operational requirements must be balanced.
Historic England publishes research into embodied carbon when retrofitting traditional buildings.
New Prime Minister delivers on ECA call for cut in electricity costs.
CIOB reacts to the announcement of Andy Burnham as Prime Minister.
Heritage and conservation science workforce survey - Have your say.
England's Suburbs 1820-2020. Book review.
New, more proportionate and targeted approach for higher-risk building assessments.
Government brings British Steel into public ownership.
UKCW Birmingham returns with bold new theme and focus.
New guidance published on competence requirements for self-certification schemes.
Construction Management, 8 July
NEETs crisis drives interest in trades, but apprenticeships barriers remain.