Mitre
A mitre joint is an angle joint. An example is a joint that is formed when two pieces meet on a 90-degree angle and each piece has been cut at an angle of 45 degrees to be joined. A good example of this type of mitre joint can be seen in picture frames. A mitre joint can also be formed when two pieces meet at different angles than 90 degrees, for example, joining skirting boards around bay windows.
A mitred joint gives a neat finish with a sharp corner, only showing a line at the angle, and with both ends concealed. However, mitred joints can be difficult to cut and match, and can suffer from the swelling and shrinking of timber which can cause the mitre to crack open from the inner corner.
Other types of joint include:
- Butt joints.
- Lap joints.
- Mortise and tenon joints.
- Dowel joints.
- Tongue and groove joints.
- Dovetail joints.
Different joints have different strengths and aesthetic properties. Some joints are more complex to create than others and can be very time-consuming. A mitre joint can be relatively simple to create and not the most time-consuming in comparison to more complex joints like a dovetail or dowel joint.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Noise in the built environment
BSRIA guide TG 20/2021.
17,000 people suffer conditions as a result of exposure to excessive noise at work.
Turning down the noise: Auditory health
A pervasive risk with far-reaching consequences.
UK Construction Week, London is here !
Debuting major international pavilions and much more.
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
New project and cultural district described in detail.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.