Air pressure and buildings
Air tightness refers to the continuity of a buildings fabric and its ability to retain air (and heat), it is measured in terms of an air leakage rate through the building's envelope. Air pressure might be described as the force exerted by air on any surface in contact, in a unconfined, confined or compressed space. Air tightness is measured with reference to a certain air pressure, normally given as 50 pascals, in a building this is approximately the pressure exerted on a fabric if a 20 mile an hour wind is blowing on all of its side sides at the same time.
at a given reference pressure (usually 50 pascal) divided by the: Heated building volume V. At 50·Pa, it is called the air change rate at 50 Pa and usually noted n50(units: h−1).
, air pressure and air flow in buildings are all related but also. .. of air or any other fluid is caused by a pressure differential between two points.
Flow will originate from an area of high energy, or pressure, and proceed to area(s) of lower energy or pressure.
Featured articles and news
Awe-inspiring medieval great barns.
Registered building inspectors
Building types and conflicts of interest updates explaineed.
Engineering services still struggle with labour shortages
According to latest quarterly services survey of the sector.
Infrastructure that connect the physical and digital domains.
Harnessing robotics and AI in challenging environments
The key to nuclear decommissioning and fusion engineering.
BSRIA announces Lisa Ashworth as new CEO
Tasked with furthering BSRIA’s impressive growth ambitions.
Public buildings get half a million energy efficiency boost
£557 million to switch to cleaner heating and save on energy.
CIOB launches pre-election manifesto
Outlining potential future policies for the next government.
Grenfell Tower Inquiry announcement
Phase 2 hearings come to a close and the final report due in September.
Progress from Parts L, F and O: A whitepaper, one year on.
A replicated study to understand the opinion of practitioners.
ECA announces new president 2024
Electrical engineer and business leader Stuart Smith.
A distinct type of countryside that should be celebrated.
Should Part O be extended to existing buildings?
EAC brands heatwave adaptation a missed opportunity.
Definition of Statutory in workplace and facilities management
Established by IWFM, BESA, CIBSE and BSRIA.
Tackling the transition from traditional heating systems
59% lack the necessary information and confidence to switch.
The general election and the construction industry
As PM, Rishi Sunak announces July 4 date for an election.