Specifying insulation for inverted roofs
Are the loads given in the introduction for AHU correct 73-90 kN/m² seem so large that I wonder whether a decimal point might be missing? (I.e 7.3-9.0 Knus/m²).
-bo
Thank you for your comment. The loads given are correct as this is specific to our high density product for inverted roofs application. I hope this answers your query. Many thanks,
Jablite Team
This page is written as if EPS is the best solution for all applications (from a supplier of EPS), without listing any benefits of XPS. From my understanding, XPS also has benefits such as:
- Less likely to be damaged by freeze-thaw weathering (water cannot permeate between the beads). Also means EPS has reduced performance when wet?
- Higher compressive strength for comparable densities
- Less likely to have condensation forming as the water is not retained below the insulation
It is important for readers to understand when each option should be used as they are both valid solutions
-AB
This article is currently being edited, please check back later.
Return to article
Featured articles and news
A systematic approach to conservation.
Delivering on a sustainability policy and action plan
How ECA exceeded its carbon reduction targets.
UKCA and CE marking; changes in detail
Pre and post brexit, now and the future of product certificates.
Construction product certification schemes
The role, background to and types of products certificates.
The construction industry ramps up for the general election
Election manifestos, charters, campaigns and comments.
Collaboration benefits of real-time file synchronisation
Three areas for users to focus on.
Time to recognise construction’s top talent.
Future of Green Skills in Sussex
A report on the incoming Green Skills revolution.
Sustainable Futures: Redefining Retrofit for Net Zero Living
The BSRIA Briefing 2024.
When flat roof specification becomes compromised.
Be alert to special features and techniques.
Practising Architect and Director of Sheldon Peever Studio.
Biodiversity net gain, tips and tools for small sites
How to deal with BNG when options become limited.
Registered building inspectors
Building types and conflicts of interest updates explained.
A brief run-down reminder of key points to note.
New electrical apprentice rates
Fair pay for much needed pipeline of electrical apprentices.