Specifying insulation for inverted roofs
Are the loads given in the introduction for AHU correct 73-90 kN/m² seem so large that I wonder whether a decimal point might be missing? (I.e 7.3-9.0 Knus/m²).
-bo
Thank you for your comment. The loads given are correct as this is specific to our high density product for inverted roofs application. I hope this answers your query. Many thanks,
Jablite Team
This page is written as if EPS is the best solution for all applications (from a supplier of EPS), without listing any benefits of XPS. From my understanding, XPS also has benefits such as:
- Less likely to be damaged by freeze-thaw weathering (water cannot permeate between the beads). Also means EPS has reduced performance when wet?
- Higher compressive strength for comparable densities
- Less likely to have condensation forming as the water is not retained below the insulation
It is important for readers to understand when each option should be used as they are both valid solutions
-AB
You must sign in or register to edit or comment on an article
Featured articles and news
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.
For the World Autism Awareness Month of April.
70+ experts appointed to public sector fire safety framework
The Fire Safety (FS2) Framework from LHC Procurement.
Project and programme management codes of practice
CIOB publications for built environment professionals.
The ECA Industry Awards 2024 now open !
Recognising the best in the electrotechnical industry.
Sustainable development concepts decade by decade.
The regenerative structural engineer
A call for design that will repair the natural world.
Buildings that mimic the restorative aspects found in nature.
CIAT publishes Principal Designer Competency Framework
For those considering applying for registration as a PD.
BSRIA Building Reg's guidance: The second staircase
An overview focusing on aspects which most affect the building services industry.
Design codes and pattern books
Harmonious proportions and golden sections.
Introducing or next Guest Editor Arun Baybars
Practising architect and design panel review member.
Quick summary by size, shape, test, material, use or bonding.
Types of rapidly renewable content
From forestry to agricultural crops and their by-products.
Terraced houses and the public realm
The discernible difference between the public realm of detached housing and of terraced housing.