UK Conformity Assessed UKCA
Contents |
[edit] Introduction
In March 2019, the Government passed legislation which came into effect on 1 January 2021 to make arrangements for the regulation of products after EU Exit. This legislation resulted in the introduction of the UKCA (UK conformity assessed) product marking system.
[edit] Harmonisation under the new approach
UKCA marking was introduced following the Brexit to replace CE marking for certain goods being placed on the market in Great Britain (England, Wales and Scotland).
UKCA marking is intended to give the UK control over its goods regulations. It also allows the UK to maintain product safety standards for most goods which previously required the CE marking (including goods covered by the EU's new approach directive as well as aerosol products that previously required reverse epsilon marking). The parameters of the new approach were developed in the early 1980s and established in the 'Council Resolution of 7 May 1985 on a New Approach to technical harmonisation and standards'. They defined the essential requirements (or common toolkit of regulatory measures) that products need to meet when they are put on the market.
[edit] Markings for construction goods
The Government has issued specific guidance for construction product regulation in the UK. This covers:
- Construction products including, but not exclusive to, cements, concrete and mortar, precast, masonry, structural metallics, insulation, roofing coverings, membranes and liquid waterproofing, wood-based panels, doors, windows, structural timber, fire stopping, sealing and production products.
- Road construction products including, but not exclusive to, surface treatments, bitumen and bituminous mixtures, bridge deck waterproofing and liquid applied waterproofing.
Construction goods lawfully marked with the CE mark and placed on the EU market before the end of the Brexit transition period are being permitted to circulate until they reach their end user, whether they are in the UK or the EU.
[edit] Specifics for Northern Ireland
Northern Ireland will continue to recognise the CE marking for goods placed on the market in Northern Ireland. Goods providers and manufacturers in Northern Ireland are required to use the UKNI marking if they use a UKCA body to test their products.
[edit] Adoption of UKCA marking postponed
On 25 August 2021, the Government announced that UKCA marking will not be mandatory for products until 1 January 2023, delaying the previous deadline by one year.
The decision came after lobbying revealed that there was insufficient availability or capacity for UKCA testing to be completed by the original deadline (December 2021). This shortage applied to many products needing third party conformity assessment, including construction products.
Uncertainty remains within the construction sector about the exact mechanism for compliance even under the revised deadline.
[edit] Related articles on Designing Buildings
- BBA becomes an Approved Body for UKCA Marking.
- CE marking in the construction industry.
- CLC publishes Conformity Marking of Construction Guide.
- Construction Products Regulation CPR.
- Deadline for CE marked products extended to 1 January 2023.
[edit] External resources
Featured articles and news
Top 50 firms awarded 52bn of projects in the last year
New engineering data shows.
Enhancing construction site reporting efficiency
Through digitisation and the digital revolution.
Noise in the built environment
BSRIA guide TG 20/2021.
17,000 people suffer conditions as a result of exposure to excessive noise at work.
Turning down the noise: Auditory health
A pervasive risk with far-reaching consequences.
UK Construction Week, London is here !
Debuting major international pavilions and much more.
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.