Passivhaus
Passivhaus or 'Passive House' is an energy performance standard for dwellings, commercial, industrial and public buildings that can be adopted throughout the world.
It was developed in Germany in the early 1990s by Professors Bo Adamson and Wolfgang Feist. The first Passivhaus dwellings were constructed in Darmstadt in Germany in 1991. It is intended primarily for new buildings, although it can be applied to refurbishment projects, but this can be expensive.
Passivhaus suggest that, 'A Passivhaus is a building, for which thermal comfort can be achieved solely by post-heating or post-cooling of the fresh air mass, which is required to achieve sufficient indoor air quality conditions – without the need for additional recirculation of air.’ This means that a traditional heating or cooling system is no longer essential.
The Passivhaus standard can be achieved by measures including:
- Shading.
- Pre-cooling of the supply air.
- Night purging.
- Natural ventilation.
- Air-tightness.
- Mechanical ventilation heat recovery (MVHR).
- Insulation.
- Avoidance of thermal bridges.
- Passive solar gains.
- Exploitation of internal heat sources.
Whilst Passivhaus adopts the principles of passive design, it differs in its imposition of an overall limit on primary energy consumption. This limit includes; domestic hot water, lighting, projected appliance consumption, space heating, fans and pumps.
The primary energy demand target must be met in all cases, and either the specific heating demand target or the specific heating load target must be also met. In addition, there are limiting values for the performance of the building fabric, doors and glazing, ventilation systems, air tightness levels and thermal bridging. See Passivhaus Outline specification for details.
The energy balance of the proposed building must be verified using the Passive House Planning Package (PHPP).
Certification is available in the UK from a number of organisations approved to assess and issue the Passivhaus Certificate, the EnerPHit certificate (for retrofit projects) and PHI Low Energy Building Certificate. See The Passivhaus Institute.
[edit] Related articles on Designing Buildings
- Active House.
- Aktivplus.
- An Introduction to Passive House - review.
- Code for sustainable homes
- BREEAM.
- Fabric first.
- Flue insulation and air tightness requirements.
- Green deal.
- Home Quality Mark.
- Leadership in Energy and Environmental Design.
- NHBC technical standards.
- Passive design.
- PHribbon tool calculates embodied carbon of designs.
- Saffron Acres, Leicester, the UK’S largest Passivhaus residential development.
- Sustainability.
- The building as climate modifier.
- Warming houses using free CO2.
- Wood and carbon.
- Wood and passivhaus.
- Zero carbon homes.
- Zero carbon non-domestic buildings.
[edit] External references
- Passivhaus organisation.
- Passivhaus Trust.
- Passipedia.
- Passive House Institute.
- Passivhaus Outline specification
Featured articles and news
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
New project and cultural district described in detail.
The nature of EPCs, crticism and inaccuracies.
History, issues and redesign.
From waste recycling to energy performance the hierchy.
An introduction to WERCS and WEEE responsibilities
Dealing with 2 million tonnes of waste equipment a year.
Global BACS Market: analytics and optimisation
A BSRIA glance at building automation and control systems.
What it is and how to use it.
Types of insulating plaster by binder and insulant.
Investors in People: CIOB achieves gold
Reflecting a commitment to employees and members.
Scratching beneath the surface; a guide to selection.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.