Fibre cement
Contents |
[edit] Introduction
Fibre cement is a composite building material first developed in the early-1980s as an asbestos-free cement-based construction product. It is used predominantly in roofing and façade products because of its strength and durability.
Fibre cement products are a mixture of:
- Natural and synthetic fibres.
- Portland Cement.
- Sand.
- Water.
- Small amounts of chemical additives to provide particular characteristics.
Some of the advantages of fibre cement include:
- Resistance to rust, rot and chemical attack.
- Vapour permeability, which reduces the risk of condensation.
- Durability.
- Excellent thermal and noise insulation properties.
- Good weather-proofing properties.
[edit] Fibre cement sheeting
Fibre cement corrugated sheets can be used for a wide range of situations, but are most common in:
- Industrial warehouses.
- Agricultural warehouse and farms.
- Stables.
- Domestic buildings and garages.
Marley Eternit, the UK’s largest manufacturer of fibre cement products, produces AS6 and AS3 profile sheets, differentiated by the size of the corrugation in the sheets. The AS3 profile has smaller corrugations than the AS6 profile. AS6 is designed for roofs with a pitch of 5-degrees, and for vertical cladding in both single skin and insulated constructions. AS3 is more suitable for small structures such as housing, general purpose sheds, and garages.
Correct fixing of the sheets is vital to avoid the risk of premature failure, corrosion or leaks. Sheets should be installed according as follows:
- The smooth surface should face upwards.
- Sheets should be cut using a hand saw or slow speed power saw.
- Fixing holes should be drilled not punched.
- Factors influencing the roof fixing, such as the purlin or rail type and the nature of the roof in question, should be carefully considered.
[edit] Fibre cement slates
A fibre cement slate is a lightweight roof tile, particularly suited to complex roof geometries, which can also be used for vertical hanging. The surface and square edge are designed to closely resemble natural slate, and have the advantage of being easier and faster to install. In addition, they can be installed on roof pitches as low as 15°.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Open industry engagement survey seeks responses
Institutions and the importance of engagement.
National Retrofit Hub unveils new guide
Digital Building Logbooks and Retrofit: An Introduction.
Top 50 firms awarded 52bn of projects in the last year
New engineering data shows.
Enhancing construction site reporting efficiency
Through digitisation and the digital revolution.
Noise in the built environment
BSRIA guide TG 20/2021.
17,000 people suffer conditions as a result of exposure to excessive noise at work.
Turning down the noise: Auditory health
A pervasive risk with far-reaching consequences.
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.