Hammerbeam roof
The older part of St Edmundsbury Cathedral has a mediaeval hammerbeam roof ornamented with figures of 30 angels. The roof is boldly painted and gilded; the figures on the hammerbeams were painted in 1948, whilst the rest of the roof was coloured in 1982. Decorating the ceiling in this way was used to link the nave with the modern extension. |
Pevsner’s Architectural Glossary (second edition) was published by Yale University Press in 2018. It defines a hammerbeam roof (or hammer-beam roof) as a structure with: ‘horizontal brackets projecting at the wall-plate level like an interrupted tie beam; the inner ends carry hammerposts, which are vertical timbers that support a purlin (or horizontal longitudinal timber) and are braced to a collar-beam above.’
Primarily used as a type of roofing support, a hammerbeam roof permits the support structure to extend beyond the length of the original piece of timber. This method may be more time consuming to construct, but it can be less expensive since it does not require long pieces of timber.
However, a hammerbeam roof is not considered a true truss, since it uses a method that rests one support beam inward and on top of the other. In this sense, it is similar to a corbel.
Tie beams are typically put in place to support this method of construction. The short pieces of timber that project from the wall and serve to anchor the tie beams are sometimes referred to as hammer-beams.
Hammerbeam roofs are often highly decorated. This technique was widely used during the English Gothic architecture period.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Specifying rendered external wall insulation for fire safety
How to interrogate the evidence provided to the specifier.
The benefits of writing articles for your organisation
How to create a profile for your organisation and publish for free.
No Falls Week. The importance of safe working at height
What to expect and what is on offer to avoid accidents.
Scottish Government action to reach net-zero targets
Retrofit expert group highlight critical actions needed.
A forward thinking, inclusive global community of members.
From engineered product life-spans, to their extension.
Circular economy in the built environment
A brief description from 2021. Where are we now?
Mental Health Awareness Week with ABS
Architects Benevolent Society programme of activity.
CLC publishes domestic retrofit competency framework
Roadmap of Skills for net zero.
May 13-19: Moving more for our mental health.
Understanding is key to conservation.
Open industry engagement survey seeks responses
Institutions and the importance of engagement.
National Retrofit Hub unveils new guide
Digital Building Logbooks and Retrofit: An Introduction.
Enhancing construction site reporting efficiency
Through digitisation and the digital revolution.