Valves
Valves are mechanical devices that control the flow of fluids such as gas, liquid, fluidised solids, slurries, and so on, by opening, closing or partially obstructing a passage.
Some common household examples of valves include:
- A tap that when turned opens a valve to release pressurised water.
- A toilet that when flushed opens two valves – one that allows water to escape, and another that refills the toilet with more water.
- A gas cooker hob that opens a valve to allow more gas to increase the flame size.
Simple valves are typically made up of several parts; a solid metal outer casing, a rubber or plastic inner seal, and a body which opens and closes, fitting into a seat.
An automated or manual mechanism is used to open and close valves. For high-pressure flow pipework, opening and closing manually can be physically difficult, often requiring a long lever or large wheel. Big valves can be operated using hydraulic rams.
There are several different types of valves, including:
- Ball valve: A hollowed-out ball sits inside a pipe obstructing the flow and swivelling through 90-degrees when turned.
- Butterfly valve: A disc sits inside a pipe and swivels sideways or upright.
- Cock or plug: A cone-shaped plug moves to one side when a wheel or handle is turned.
- Gate or sluice: Metal gates are lowered across pipes, usually only capable of being fully open or fully closed.
- Globe: When turned a valve is screwed in, such as with a tap.
- Needle: A long, sliding needle regulates fluid flow, such as in central heating systems.
- Spool: Valves slide backwards and forwards to direct fluid flow around a pipe circuit, such as in hydraulic systems.
For more information see: Types of valve.
[edit] Related articles on Designing Buildings
- Actuator.
- A guide to installing thermostatic mixing valves: what, why and how.
- BSRIA announces 2021 European HVAC field device study.
- BSRIA publishes new edition of BG29.
- BSRIA study: The market for European Field Devices.
- Closed Systems Control Association.
- Control valve.
- Differential pressure control valve.
- Float valve.
- Gasket.
- Mechanical, electrical and plumbing MEP.
- Pipework.
- Pipework defects, ventilation and airflow rates.
- Pressure independent control valves.
- Pressure-relief valve.
- Stop valve.
- Tap.
- Thermostatic mixing valve.
- Types of valve.
- Water hammer.
- What makes a good PICV?
Featured articles and news
The general election and the construction industry
As PM, Rishi Sunak announces July 4 date for an election.
Tackling the lack of knowledge or confidence in heat pumps
The CICV Green Home Festival part of the Edinburgh Fringe.
Home improvements swapped for green energy upgrades
As applications down since and desire to reduce bills up.
Eco apprenticeships continue help grow green workforce
A year after being recognised at the King's coronation.
The Use of Natural Insulation Materials in Retrofit
New paper from STBA with support from SDF.
National Retrofit Hub in partnership with InstallerSHOW.
Permitted development rights for agricultural buildings
The changes coming into effect as of May 21, 2024.
Biodiversity and the built environment digital series
The nature of building, with CIOB and CWP.
A call for prevention and sensitive re-use.
Risks to the long-term effectiveness of the BNG scheme
National Audit Office publish review of Biodiversity Net Gain.
The CIAT principal designer register
Providing assurance and verification of the capability and competence of registered ATs.
Building Safety recommendations and Northern Ireland
The NI roadmap to improving safety in high rise residential.
Specifying rendered external wall insulation for fire safety
How to interrogate the evidence provided to the specifier.
The benefits of writing articles for your organisation
How to create a profile for your organisation and publish for free.
Scottish Government action to reach net-zero targets
Retrofit expert group highlight critical actions needed.
A forward thinking, inclusive global community of members.
Comments