Health and safety plan
The requirement for a Health and Safety Plan for construction was established by the Construction (Design and Management) Regulations (or 'CDM Regulations') in 1994. The regulations came into force on 31 March 1995.
The regulations were introduced to ensure that health and safety issues are properly considered during a project’s development so that the risk of harm to those who have to build, use and maintain structures is reduced.
The original regulations required that the Planning Supervisor ensure a Pre-Tender Health and Safety Plan was prepared for contractors setting out:
- A general description of the construction work.
- The programme.
- Risks to the health or safety of any person carrying out the construction work.
- Other information enabling the contractors to demonstrate the competence and adequacy of resources.
- Other information enabling the contractors to understand and perform their duties under the regulations.
The Principal Contractor then ensured that during the construction phase the Health and Safety Plan contained information about:
- Arrangements for the project to ensure the health and safety of all persons carrying out the construction work and all persons who may be affected by the work.
- Information about arrangements for the welfare of persons carrying out the construction work.
However, the CDM Regulations were substantially revised in 2007. Amongst many changes:
- The role of Planning Supervisor was replaced with a new, more hands-on CDM Co-ordinator.
- The Pre-Tender Health and Safety Plan was replaced with Pre-Construction Information, provided by the client and checked by the CDM Co-ordinator.
- The Health and Safety Plan was renamed the Construction Phase Plan (CPP), developed by the Principal Contractor.
NB: Rather confusingly, the Construction Phase Plan is still sometimes referred to as the Construction Phase Health and Safety Plan.
[edit] Related articles on Designing Buildings Wiki
- Automated external defibrillator AED.
- CDM.
- CDM Co-ordinator.
- Construction phase plan.
- Emergency plan.
- Health and safety file.
- Planning supervisor.
- Pre-construction information.
- Principal contractor.
- Safety.
- Safety audit.
[edit] External references
Six things to include in the health and safety plan for a construction site
Featured articles and news
The benefits of writing articles for your organisation
How to create a profile for your organisation and publish for free.
No Falls Week. The importance of safe working at height
What to expect and what is on offer to avoid accidents.
Scottish Government action to reach net-zero targets
Retrofit expert group highlight critical actions needed.
A forward thinking, inclusive global community of members.
From engineered product life-spans, to their extension.
Circular economy in the built environment
A brief description from 2021. Where are we now?
Mental Health Awareness Week with ABS
Architects Benevolent Society programme of activity.
CLC publishes domestic retrofit competency framework
Roadmap of Skills for net zero.
May 13-19: Moving more for our mental health.
Understanding is key to conservation.
Open industry engagement survey seeks responses
Institutions and the importance of engagement.
National Retrofit Hub unveils new guide
Digital Building Logbooks and Retrofit: An Introduction.
Enhancing construction site reporting efficiency
Through digitisation and the digital revolution.
Noise in the built environment
BSRIA guide TG 20/2021.
17,000 people suffer conditions as a result of exposure to excessive noise at work.
Turning down the noise: Auditory health
A pervasive risk with far-reaching consequences.
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Electrotechnical excellence, now open for entries.
Comments
Out of date information - CDM regulations updated in 2015