3D concrete printer
The RAF recently publicised their use of metal and 3D printers to manufacture spare parts for their Tornado jets, and in 2013 we were told a rifle was manufactured in the USA that used plastic and 3D printing.
So it should come as no surprise to hear concrete could also be used as a layering medium with 3D printers. The University of California have been ‘contour crafting’ in concrete to produce small-scale models of the external and internal walls of houses. The researchers under Professor Behrokh Khoshnevis are now testing a giant transportable 3D printer that could be used to build the walls of an entire house in just twenty four hours. Consistency, accuracy and speed could lead to the replacement of a large element of labour-intensive work.
The robotic system requires a flat ground slab with underground services in place. Rails are installed either side of the footprint to take a gantry crane that spans the building. A nozzle, driven by a computer-controlled crafter then delivers the layering of concrete. The layers build up to form an inner and outer skin to each wall, leaving them to be filled later with insulation or concrete.
In November 2014, Skanska and Loughborough University signed a deal to develop what they describe as the world’s first commercial concrete printing robot. Ref Construction Enquirer, Skanska to print 3D concrete products.
Building information model (BIM) enthusiasts will be watching such developments with great interest as it is a small step to link BIM design to 3D printing. It could offer an answer to accelerating the provision of UK housing without having to mass produce units to the exact same design.
[edit] Related articles on Designing Buildings
- 3D concrete printing market.
- 3D printed bridge.
- 3D printing in construction.
- Beyond bending - The Armadillo Vault.
- Flying factory.
- Mesh mould metal.
- Prefabrication.
- Offsite manufacturing.
- TruVision.
- WikiHouse.
[edit] External references
- Contour Crafting.
- MSN, The 3D printer that can build a house in 24 hours, 20 November 2013
- Discover Magazine, The Whole House Machine, 28 April 2005.
- Construction Enquirer, Skanska to print 3D concrete products. 24 November 2014.
Featured articles and news
A forward thinking, inclusive global community of members.
From engineered product life-spans, to their extension.
Circular economy in the built environment
A brief description from 2021. Where are we now?
Mental Health Awareness Week with ABS
Architects Benevolent Society programme of activity.
CLC publishes domestic retrofit competency framework
Roadmap of Skills for net zero.
May 13-19: Moving more for our mental health.
Understanding is key to conservation.
Open industry engagement survey seeks responses
Institutions and the importance of engagement.
National Retrofit Hub unveils new guide
Digital Building Logbooks and Retrofit: An Introduction.
Enhancing construction site reporting efficiency
Through digitisation and the digital revolution.
Noise in the built environment
BSRIA guide TG 20/2021.
17,000 people suffer conditions as a result of exposure to excessive noise at work.
Turning down the noise: Auditory health
A pervasive risk with far-reaching consequences.
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Electrotechnical excellence, now open for entries.
Comments
test