Stainless steel vs. galvanised steel
Stainless steel and galvanised steel are both commonly used materials in construction. While they are similar in appearance they differ in terms of composition, weight, strength and application, although there is a certain amount of crossover between them.
Stainless steel is manufactured by a process that involves a mixture of at least 10% chromium and regular carbon steel in a molten state. Once it is cooled and hardened, the steel is acid-treated to remove any impurities from the surface. It is the addition of chromium that protects stainless steel from corrosion.
Galvanised steel is manufactured by a process that involves dipping steel into molten zinc which hardens to form a protective, anti-corrosive coating through the formation of zinc oxide.
The zinc coating on galvanised steel eventually wears off, and if is scratched or damaged in any way, it can become susceptible to rust. However, The zinc acts as a sacrificial anode, meaning that the remaining zinc will still protect the exposed steel.
For more information, see Galvanzing.
It's use is typically restricted to applications where there is minimal risk of damage. Galvanised steel is significantly less expensive than stainless steel, and is commonly used, for example, to make; nuts, bolts, fasteners and other fixings (although some components may be too large or too small to be hot-dipped), as well as being used in many common appliances.
For more information see: Galvanised steel.
In contrast, stainless steel retains its anti-corrosive qualities for longer, as the chromium forms an inextricable part of the steel material itself. As a result, stainless steel is more durable than galvanised steel, and is preferred for some uses in the construction of buildings, such as the construction of high-rise buildings. It does not rust even when scratched, so is commonly used for the working parts of hand tools such as saw blades. It is also more resistant to salt than zinc oxide, and so is more commonly used for applications in marine and coastal environments.
For more information see: Stainless steel.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Open industry engagement survey seeks responses
Institutions and the importance of engagement.
National Retrofit Hub unveils new guide
Digital Building Logbooks and Retrofit: An Introduction.
Top 50 firms awarded 52bn of projects in the last year
New engineering data shows.
Enhancing construction site reporting efficiency
Through digitisation and the digital revolution.
Noise in the built environment
BSRIA guide TG 20/2021.
17,000 people suffer conditions as a result of exposure to excessive noise at work.
Turning down the noise: Auditory health
A pervasive risk with far-reaching consequences.
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.