Glasswool insulation
Glasswool is a type of insulation material that is made from recycled glass. It is commonly used in buildings to insulate walls, ceilings and roofs to keep the interior of the building warm in the winter and cool in the summer. Glasswool is also used in a variety of other applications, such as soundproofing and as a filter material. Because it is made from recycled glass, glasswool can be considered a sustainable material.
It is similar in some respects to rockwool, but glasswool is made from recycled glass, whereas rockwool is made from basalt, a type of volcanic rock.
Glasswool is made by melting recycled glass and spinning it into fine fibres which are then formed into insulation batts or rolls. The melted glass is mixed with other materials, such as boron or alumina, to give the glasswool its insulation properties. The process of making glasswool is similar to the process used to make other types of fiberglass insulation.
There are many different types of insulation materials available, each with its own unique properties and characteristics. Comparing glasswool to other types of insulation can be difficult because it depends on the specific application and the performance criteria that are important in that situation. In general, glasswool is a sustainable insulation option that can provide good thermal insulation and soundproofing properties. It is also relatively easy to instal and can be used in a variety of different applications. However, it is not as effective as some other types of insulation at preventing the passage of moisture, so it may not be the best choice in damp or humid environments.
Glasswool can also be irritating to the skin and respiratory system. It is important to use protective gear, such as gloves, masks, and goggles when handling glasswool to avoid irritation. Additionally, glasswool products can be flammable, so it is important to follow the manufacturer's instructions when installing it to ensure that it is used safely. Glasswool itself is non-flammable, but the wrapping, resin binder, and some facings may burn.
[edit] Related articles on Designing Buildings
- Aerogel insulation for buildings.
- Acoustic insulation.
- Cavity wall insulation.
- External wall insulation.
- Floor insulation.
- Glass wool v reflective foil insulation.
- Insulating concrete form.
- Insulation envelope.
- Insulation for ground floors.
- Phenolic foam insulation.
- Reducing thermal bridging at junctions when designing and installing solid wall insulation FB 61.
- Roof insulation.
- Solid wall insulation.
- Solid Wall Insulation: Unlocking demand and driving up standards.
- Specifying insulation for inverted roofs.
- Ten facts about Expanded Polystyrene (EPS) insulation to help specifiers.
- Thermal insulation for buildings.
- Transparent insulation.
- Types of insulation.
Featured articles and news
Top 50 firms awarded 52bn of projects in the last year
New engineering data shows.
Enhancing construction site reporting efficiency
Through digitisation and the digital revolution.
Noise in the built environment
BSRIA guide TG 20/2021.
17,000 people suffer conditions as a result of exposure to excessive noise at work.
Turning down the noise: Auditory health
A pervasive risk with far-reaching consequences.
UK Construction Week, London is here !
Debuting major international pavilions and much more.
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.