Designing Buildings - User contributions [en]

Shaping up the benefits of offsite manufacture of brick slip soffit systems and intricate brick features

2020-09-21T16:49:04Z

IG Masonry Support:

[[File:IG_Masonry_support_systems_case_studies.png|link=File:IG_Masonry_support_systems_case_studies.png]]

Whilst traditional building methods still have their place, the advantages of offsite construction in addressing both the skills shortage and solving the industry’s drive for quality will motivate many across the sector to adopt these efficient practices. In light of this, how can the offsite manufacture of products such as brick slip soffit systems enable specifiers to respond to these industry challenges whilst at the same time achieve the most complex architectural designs?

= Incredible brickwork =

[[File:IG_masonry_support_systems_dnrc.jpg|link=File:IG_masonry_support_systems_dnrc.jpg]]

With offsite methods, architects can create intricate brickwork designs that are guaranteed to translate onsite and ensure the same quality finish every time. Consistency and quality were essential at the [http://igmasonrysupport.com/casestudies/dnrc/ Defence and National Rehabilitation Centre (DNRC)] in Loughborough. Over 1000 brick slip feature arches and just under 3km of offsite cornice were manufactured and designed by [http://igmasonrysupport.com/ IG Masonry Support]. It would have been a time-consuming, highly-skilled task to create arches and cornice using traditional methods onsite, therefore IG utilised its offsite solutions to create identical arches of various designs and cornice detail that would achieve the architect’s desired aesthetic.

[[File:IG_Masonry_support_systems_dnrc2.png|link=File:IG_Masonry_support_systems_dnrc2.png]]

The uniformity that was essential to this project can run the risk of being compromised if traditional trades are employed. However, with modular construction this replication simply isn’t an issue. Taking the construction of complex brick features offsite into factory-controlled conditions drives the level of quality and consistency that is needed to achieve architectural excellence, and often reaches further than the capabilities of traditional build processes, particularly on large-scale developments.

= Addressing the skills gap =

Rethinking the way we design, engineer and construct buildings will help deliver projects quicker, better and with a greater degree of precision. Building better with these modern methods of construction plays a part in plugging the skills gap by reducing onsite labour whilst addressing the high demand for new buildings.

Furthermore, offsite manufacturing is a potential solution to mitigating risk. With prefabricated products everything is fixed in a factory-controlled environment where quality is guaranteed every time. When it comes to installation, architects can rest assured that their design will be installed quickly with reduced risk.

= Bespoke solutions =

At [http://igmasonrysupport.com/ IG Masonry Support], not only do we understand that architects need to be given creative authority over prefabricated brick features. We also realise the importance of regulatory compliance and quality.

Achieving deep brick soffits and intricate brick bonds around window heads and openings is quick, easy and cost-efficient to achieve with our Brick On Soffit Systems ([http://igmasonrysupport.com/ig-brick-on-soffit-system/ B.O.S.S.] and [http://igmasonrysupport.com/boss-plus/ B.O.S.S.+]). These tailor-made bespoke solutions are designed and manufactured to meet the client’s specification and are highly adjustable, enabling architects to design various shapes and depths of brick soffits whilst accommodating a wide range of bond patterns.

{|
| [[File:IG masonry support systems BOSS 3.png]]
| [[File:IG masonry support systems BOSS 4 1.png]]
|}

IG’s latest innovation, [http://igmasonrysupport.com/boss-plus/ B.O.S.S.+], is a mechanically-fixed brick slip soffit system. As well as being an easy-to-install, quality system, [http://igmasonrysupport.com/boss-plus/ B.O.S.S.+] was developed to meet with the fire safety regulations highlighted in Approved Document B, building regulations for non-combustible materials for use in the external walls of residential dwellings over 18 metres in height. For added security, all the brick slips on this BBA-approved product are attached to the stainless-steel framework with a robust mechanical fix.

[http://igmasonrysupport.com/ IG Masonry Support] has combined experience with innovation to design and manufacture the most practical and advanced range of ‘patented’ stainless steel masonry support solutions, brick slip soffit systems and intricate brick features for the construction industry. We provide comprehensive technical support for all our products and offer a free design service for our range of off the shelf and bespoke solutions.

Offering endless creative scope for architects, our easy-to-install solutions can deliver significant reductions in installation time by up to 90%. Any higher initial costs can be offset by saving time and money in terms of labour. A quality finish that meets the required aesthetics and blends seamlessly with the surrounding brickwork can also be achieved.

For more information visit the [http://igmasonrysupport.com/products/ IG Masonry Support website].

--[[User:IG_Masonry_Support|IG Masonry Support]] 17:21, 21 Sep 2020 (BST)

[[Category:Do_not_autolink]] [[Category:Products_/_components]]

File:IG masonry support systems BOSS 4 1.png

2020-09-21T16:47:40Z

IG Masonry Support:

File:IG masonry support systems BOSS 4.png

2020-09-21T16:44:55Z

IG Masonry Support:

File:IG masonry support systems BOSS 3.png

2020-09-21T16:44:35Z

IG Masonry Support:

Shaping up the benefits of offsite manufacture of brick slip soffit systems and intricate brick features

2020-09-21T16:37:11Z

IG Masonry Support:

[[File:IG_Masonry_support_systems_case_studies.png|link=File:IG_Masonry_support_systems_case_studies.png]]

Whilst traditional building methods still have their place, the advantages of offsite construction in addressing both the skills shortage and solving the industry’s drive for quality will motivate many across the sector to adopt these efficient practices. In light of this, how can the offsite manufacture of products such as brick slip soffit systems enable specifiers to respond to these industry challenges whilst at the same time achieve the most complex architectural designs?

= Incredible brickwork =

[[File:IG_masonry_support_systems_dnrc.jpg|link=File:IG_masonry_support_systems_dnrc.jpg]]

With offsite methods, architects can create intricate brickwork designs that are guaranteed to translate onsite and ensure the same quality finish every time. Consistency and quality were essential at the [http://igmasonrysupport.com/casestudies/dnrc/ Defence and National Rehabilitation Centre (DNRC)] in Loughborough. Over 1000 brick slip feature arches and just under 3km of offsite cornice were manufactured and designed by [http://igmasonrysupport.com/ IG Masonry Support]. It would have been a time-consuming, highly-skilled task to create arches and cornice using traditional methods onsite, therefore IG utilised its offsite solutions to create identical arches of various designs and cornice detail that would achieve the architect’s desired aesthetic.

[[File:IG_Masonry_support_systems_dnrc2.png|link=File:IG_Masonry_support_systems_dnrc2.png]]

The uniformity that was essential to this project can run the risk of being compromised if traditional trades are employed. However, with modular construction this replication simply isn’t an issue. Taking the construction of complex brick features offsite into factory-controlled conditions drives the level of quality and consistency that is needed to achieve architectural excellence, and often reaches further than the capabilities of traditional build processes, particularly on large-scale developments.

= Addressing the skills gap =

Rethinking the way we design, engineer and construct buildings will help deliver projects quicker, better and with a greater degree of precision. Building better with these modern methods of construction plays a part in plugging the skills gap by reducing onsite labour whilst addressing the high demand for new buildings.

Furthermore, offsite manufacturing is a potential solution to mitigating risk. With prefabricated products everything is fixed in a factory-controlled environment where quality is guaranteed every time. When it comes to installation, architects can rest assured that their design will be installed quickly with reduced risk.

= Bespoke solutions =

At [http://igmasonrysupport.com/ IG Masonry Support], not only do we understand that architects need to be given creative authority over prefabricated brick features. We also realise the importance of regulatory compliance and quality.

Achieving deep brick soffits and intricate brick bonds around window heads and openings is quick, easy and cost-efficient to achieve with our Brick On Soffit Systems ([http://igmasonrysupport.com/ig-brick-on-soffit-system/ B.O.S.S.] and [http://igmasonrysupport.com/boss-plus/ B.O.S.S.+]). These tailor-made bespoke solutions are designed and manufactured to meet the client’s specification and are highly adjustable, enabling architects to design various shapes and depths of brick soffits whilst accommodating a wide range of bond patterns.

{|
| [[File:IG BOSS.png]]
| [[File:IG BOSS 2.png]]
|}

IG’s latest innovation, [http://igmasonrysupport.com/boss-plus/ B.O.S.S.+], is a mechanically-fixed brick slip soffit system. As well as being an easy-to-install, quality system, [http://igmasonrysupport.com/boss-plus/ B.O.S.S.+] was developed to meet with the fire safety regulations highlighted in Approved Document B, building regulations for non-combustible materials for use in the external walls of residential dwellings over 18 metres in height. For added security, all the brick slips on this BBA-approved product are attached to the stainless-steel framework with a robust mechanical fix.

[http://igmasonrysupport.com/ IG Masonry Support] has combined experience with innovation to design and manufacture the most practical and advanced range of ‘patented’ stainless steel masonry support solutions, brick slip soffit systems and intricate brick features for the construction industry. We provide comprehensive technical support for all our products and offer a free design service for our range of off the shelf and bespoke solutions.

Offering endless creative scope for architects, our easy-to-install solutions can deliver significant reductions in installation time by up to 90%. Any higher initial costs can be offset by saving time and money in terms of labour. A quality finish that meets the required aesthetics and blends seamlessly with the surrounding brickwork can also be achieved.

--[[User:IG_Masonry_Support|IG Masonry Support]] 17:21, 21 Sep 2020 (BST)

[[Category:Do_not_autolink]] [[Category:Products_/_components]]

Shaping up the benefits of offsite manufacture of brick slip soffit systems and intricate brick features

2020-09-21T16:32:27Z

IG Masonry Support:

[[File:IG Masonry support systems case studies.png]]

Whilst traditional building methods still have their place, the advantages of offsite construction in addressing both the skills shortage and solving the industry’s drive for quality will motivate many across the sector to adopt these efficient practices. In light of this, how can the offsite manufacture of products such as brick slip soffit systems enable specifiers to respond to these industry challenges whilst at the same time achieve the most complex architectural designs?

= Incredible brickwork =

[[File:IG masonry support systems dnrc.jpg]]

With offsite methods, architects can create intricate brickwork designs that are guaranteed to translate onsite and ensure the same quality finish every time. Consistency and quality were essential at the [http://igmasonrysupport.com/casestudies/dnrc/ Defence and National Rehabilitation Centre (DNRC)] in Loughborough. Over 1000 brick slip feature arches and just under 3km of offsite cornice were manufactured and designed by [http://igmasonrysupport.com/ IG Masonry Support]. It would have been a time-consuming, highly-skilled task to create arches and cornice using traditional methods onsite, therefore IG utilised its offsite solutions to create identical arches of various designs and cornice detail that would achieve the architect’s desired aesthetic.

[[File:IG Masonry support systems dnrc2.png]]

The uniformity that was essential to this project can run the risk of being compromised if traditional trades are employed. However, with modular construction this replication simply isn’t an issue. Taking the construction of complex brick features offsite into factory-controlled conditions drives the level of quality and consistency that is needed to achieve architectural excellence, and often reaches further than the capabilities of traditional build processes, particularly on large-scale developments.

= Addressing the skills gap =

Rethinking the way we design, engineer and construct buildings will help deliver projects quicker, better and with a greater degree of precision. Building better with these modern methods of construction plays a part in plugging the skills gap by reducing onsite labour whilst addressing the high demand for new buildings.

Furthermore, offsite manufacturing is a potential solution to mitigating risk. With prefabricated products everything is fixed in a factory-controlled environment where quality is guaranteed every time. When it comes to installation, architects can rest assured that their design will be installed quickly with reduced risk.

= Bespoke solutions =

At [http://igmasonrysupport.com/ IG Masonry Support], not only do we understand that architects need to be given creative authority over prefabricated brick features. We also realise the importance of regulatory compliance and quality.

Achieving deep brick soffits and intricate brick bonds around window heads and openings is quick, easy and cost-efficient to achieve with our Brick On Soffit Systems ([http://igmasonrysupport.com/ig-brick-on-soffit-system/ B.O.S.S.] and [http://igmasonrysupport.com/boss-plus/ B.O.S.S.+]). These tailor-made bespoke solutions are designed and manufactured to meet the client’s specification and are highly adjustable, enabling architects to design various shapes and depths of brick soffits whilst accommodating a wide range of bond patterns.

IG’s latest innovation, [http://igmasonrysupport.com/boss-plus/ B.O.S.S.+], is a mechanically-fixed brick slip soffit system. As well as being an easy-to-install, quality system, [http://igmasonrysupport.com/boss-plus/ B.O.S.S.+] was developed to meet with the fire safety regulations highlighted in Approved Document B, building regulations for non-combustible materials for use in the external walls of residential dwellings over 18 metres in height. For added security, all the brick slips on this BBA-approved product are attached to the stainless-steel framework with a robust mechanical fix.

[http://igmasonrysupport.com/ IG Masonry Support] has combined experience with innovation to design and manufacture the most practical and advanced range of ‘patented’ stainless steel masonry support solutions, brick slip soffit systems and intricate brick features for the construction industry. We provide comprehensive technical support for all our products and offer a free design service for our range of off the shelf and bespoke solutions.

Offering endless creative scope for architects, our easy-to-install solutions can deliver significant reductions in installation time by up to 90%. Any higher initial costs can be offset by saving time and money in terms of labour. A quality finish that meets the required aesthetics and blends seamlessly with the surrounding brickwork can also be achieved.

--[[User:IG_Masonry_Support|IG Masonry Support]] 17:21, 21 Sep 2020 (BST)

[[Category:Do_not_autolink]] [[Category:Products_/_components]]

File:IG Masonry support systems dnrc2.png

2020-09-21T16:31:02Z

IG Masonry Support:

File:IG masonry support systems dnrc.jpg

2020-09-21T16:28:18Z

IG Masonry Support:

File:IG Masonry support systems case studies.png

2020-09-21T16:26:19Z

IG Masonry Support:

Shaping up the benefits of offsite manufacture of brick slip soffit systems and intricate brick features

2020-09-21T16:21:01Z

IG Masonry Support:

Whilst traditional building methods still have their place, the advantages of offsite construction in addressing both the skills shortage and solving the industry’s drive for quality will motivate many across the sector to adopt these efficient practices. In light of this, how can the offsite manufacture of products such as brick slip soffit systems enable specifiers to respond to these industry challenges whilst at the same time achieve the most complex architectural designs?

= Incredible brickwork =

With offsite methods, architects can create intricate brickwork designs that are guaranteed to translate onsite and ensure the same quality finish every time. Consistency and quality were essential at the [http://igmasonrysupport.com/casestudies/dnrc/ Defence and National Rehabilitation Centre (DNRC)] in Loughborough. Over 1000 brick slip feature arches and just under 3km of offsite cornice were manufactured and designed by [http://igmasonrysupport.com/ IG Masonry Support]. It would have been a time-consuming, highly-skilled task to create arches and cornice using traditional methods onsite, therefore IG utilised its offsite solutions to create identical arches of various designs and cornice detail that would achieve the architect’s desired aesthetic.

The uniformity that was essential to this project can run the risk of being compromised if traditional trades are employed. However, with modular construction this replication simply isn’t an issue. Taking the construction of complex brick features offsite into factory-controlled conditions drives the level of quality and consistency that is needed to achieve architectural excellence, and often reaches further than the capabilities of traditional build processes, particularly on large-scale developments.

= Addressing the skills gap =

Rethinking the way we design, engineer and construct buildings will help deliver projects quicker, better and with a greater degree of precision. Building better with these modern methods of construction plays a part in plugging the skills gap by reducing onsite labour whilst addressing the high demand for new buildings.

Furthermore, offsite manufacturing is a potential solution to mitigating risk. With prefabricated products everything is fixed in a factory-controlled environment where quality is guaranteed every time. When it comes to installation, architects can rest assured that their design will be installed quickly with reduced risk.

= Bespoke solutions =

At [http://igmasonrysupport.com/ IG Masonry Support], not only do we understand that architects need to be given creative authority over prefabricated brick features. We also realise the importance of regulatory compliance and quality.

Achieving deep brick soffits and intricate brick bonds around window heads and openings is quick, easy and cost-efficient to achieve with our Brick On Soffit Systems ([http://igmasonrysupport.com/ig-brick-on-soffit-system/ B.O.S.S.] and [http://igmasonrysupport.com/boss-plus/ B.O.S.S.+]). These tailor-made bespoke solutions are designed and manufactured to meet the client’s specification and are highly adjustable, enabling architects to design various shapes and depths of brick soffits whilst accommodating a wide range of bond patterns.

IG’s latest innovation, [http://igmasonrysupport.com/boss-plus/ B.O.S.S.+], is a mechanically-fixed brick slip soffit system. As well as being an easy-to-install, quality system, [http://igmasonrysupport.com/boss-plus/ B.O.S.S.+] was developed to meet with the fire safety regulations highlighted in Approved Document B, building regulations for non-combustible materials for use in the external walls of residential dwellings over 18 metres in height. For added security, all the brick slips on this BBA-approved product are attached to the stainless-steel framework with a robust mechanical fix.

[http://igmasonrysupport.com/ IG Masonry Support] has combined experience with innovation to design and manufacture the most practical and advanced range of ‘patented’ stainless steel masonry support solutions, brick slip soffit systems and intricate brick features for the construction industry. We provide comprehensive technical support for all our products and offer a free design service for our range of off the shelf and bespoke solutions.

Offering endless creative scope for architects, our easy-to-install solutions can deliver significant reductions in installation time by up to 90%. Any higher initial costs can be offset by saving time and money in terms of labour. A quality finish that meets the required aesthetics and blends seamlessly with the surrounding brickwork can also be achieved.

--[[User:IG Masonry Support|IG Masonry Support]] 17:21, 21 Sep 2020 (BST)

[[Category:Products_/_components]]

Shaping up the benefits of offsite manufacture of brick slip soffit systems and intricate brick features

2020-09-21T16:19:28Z

IG Masonry Support: Created page with "Whilst traditional building methods still have their place, the advantages of offsite construction in addressing both the skills shortage and solving the industry’s drive for q..."

Whilst traditional building methods still have their place, the advantages of offsite construction in addressing both the skills shortage and solving the industry’s drive for quality will motivate many across the sector to adopt these efficient practices. In light of this, how can the offsite manufacture of products such as brick slip soffit systems enable specifiers to respond to these industry challenges whilst at the same time achieve the most complex architectural designs?

Incredible brickwork

With offsite methods, architects can create intricate brickwork designs that are guaranteed to translate onsite and ensure the same quality finish every time. Consistency and quality were essential at the [http://igmasonrysupport.com/casestudies/dnrc/ Defence and National Rehabilitation Centre (DNRC)] in Loughborough. Over 1000 brick slip feature arches and just under 3km of offsite cornice were manufactured and designed by [http://igmasonrysupport.com/ IG Masonry Support]. It would have been a time-consuming, highly-skilled task to create arches and cornice using traditional methods onsite, therefore IG utilised its offsite solutions to create identical arches of various designs and cornice detail that would achieve the architect’s desired aesthetic.

The uniformity that was essential to this project can run the risk of being compromised if traditional trades are employed. However, with modular construction this replication simply isn’t an issue. Taking the construction of complex brick features offsite into factory-controlled conditions drives the level of quality and consistency that is needed to achieve architectural excellence, and often reaches further than the capabilities of traditional build processes, particularly on large-scale developments.

Addressing the skills gap

Rethinking the way we design, engineer and construct buildings will help deliver projects quicker, better and with a greater degree of precision. Building better with these modern methods of construction plays a part in plugging the skills gap by reducing onsite labour whilst addressing the high demand for new buildings.

Furthermore, offsite manufacturing is a potential solution to mitigating risk. With prefabricated products everything is fixed in a factory-controlled environment where quality is guaranteed every time. When it comes to installation, architects can rest assured that their design will be installed quickly with reduced risk.

Bespoke solutions

At [http://igmasonrysupport.com/ IG Masonry Support], not only do we understand that architects need to be given creative authority over prefabricated brick features. We also realise the importance of regulatory compliance and quality.

Achieving deep brick soffits and intricate brick bonds around window heads and openings is quick, easy and cost-efficient to achieve with our Brick On Soffit Systems ([http://igmasonrysupport.com/ig-brick-on-soffit-system/ B.O.S.S.] and [http://igmasonrysupport.com/boss-plus/ B.O.S.S.+]). These tailor-made bespoke solutions are designed and manufactured to meet the client’s specification and are highly adjustable, enabling architects to design various shapes and depths of brick soffits whilst accommodating a wide range of bond patterns.

IG’s latest innovation, [http://igmasonrysupport.com/boss-plus/ B.O.S.S.+], is a mechanically-fixed brick slip soffit system. As well as being an easy-to-install, quality system, [http://igmasonrysupport.com/boss-plus/ B.O.S.S.+] was developed to meet with the fire safety regulations highlighted in Approved Document B, building regulations for non-combustible materials for use in the external walls of residential dwellings over 18 metres in height. For added security, all the brick slips on this BBA-approved product are attached to the stainless-steel framework with a robust mechanical fix.

[http://igmasonrysupport.com/ IG Masonry Support] has combined experience with innovation to design and manufacture the most practical and advanced range of ‘patented’ stainless steel masonry support solutions, brick slip soffit systems and intricate brick features for the construction industry. We provide comprehensive technical support for all our products and offer a free design service for our range of off the shelf and bespoke solutions.

Offering endless creative scope for architects, our easy-to-install solutions can deliver significant reductions in installation time by up to 90%. Any higher initial costs can be offset by saving time and money in terms of labour. A quality finish that meets the required aesthetics and blends seamlessly with the surrounding brickwork can also be achieved.

[[Category:Products_/_components]]

User:IG Masonry Support

2020-09-21T16:14:14Z

IG Masonry Support:

IG Masonry Support has combined experience with innovation to provide the most practical and advanced range of Masonry Support products on the market. Offering optimum performance and design flexibility, IG Masonry Support has also developed a revolutionary brick on soffit system which radically reduces on site labour. IG provides comprehensive technical support for all our masonry support products. Our free scheduling and specification service offers fast turnaround on masonry support and windpost systems. 
Our experienced team of over forty structural and civil engineers offer a free design service and on-site support offering a range of off the shelf and bespoke solutions.

= Products =

== IG Keyfix ==

{|
|width="50%"| [[File:IG_Key_Fix_v2.png|300px|link=File:IG_Key_Fix_v2.png]]
|width="50%"|
Keyfix is setting new standards in the delivery of non-combustible (NC) cavity systems for projects requiring Document B compliance in buildings over 18m high utilising steel frame systems in the external cavity. Our innovative NC range of A1 fire rated cavity trays is a practical solution to provide DPC protection over lintels, masonry supports, soffit systems and other elements in the cavity such as fire barriers etc.

[http://igmasonrysupport.com/ig-keyfix/ Read More]
|}

== IG Brick On Soffit System (B.O.S.S +®) ==

{|
|width="50%"| [[File:IG_BOSS.png|300px|link=File:IG_BOSS.png]]
|width="50%"|
B.O.S.S.+ is an innovative lightweight Brick Slip Soffit System, with the added security of mechanically fixed brick slips. An extension of the Brick On Soffit System (B.O.S.S.), this BBA certified unit is suitable for use on residential buildings over 18m above ground level and complies with the Building Regulations 2010* Approved Document B:Fire Safety.

[http://igmasonrysupport.com/boss-plus/ Read More]
|}

== IG Brick On Soffit System (B.O.S.S +®) ==

{|
|width="50%"| [[File:IG_BOSS_2.png|300px|link=File:IG_BOSS_2.png]]
|width="50%"|
The B.O.S.S.® range provides a lighter alternative to concrete, which is faster to install than traditional hanging brick systems. Installed to a pre-fitted masonry support system, B.O.S.S.® allows increased adjustability along three axes. Produced offsite, B.O.S.S.® offers a quicker, lighter, easier and more cost efficient option.

[http://igmasonrysupport.com/ig-brick-on-soffit-system/ Read More]
|}

== IG Titan System ==

{|
|width="50%"| [[File:IG_Titan_System.png|300px|link=File:IG_Titan_System.png]]
|width="50%"|
IG’s Titan System is designed to meet with the industry’s demand for speed of construction. All configurations are available ex-stock meeting all the builder’s needs.

This system offers a range of bracket sizes to accommodate various cavity widths. IG Titan is a fully adjustable system accommodating loads up to 14 kN/m.

[http://igmasonrysupport.com/ig-titan-system/ Read More]
|}

== IG Welded Masonry Support ==

{|
|width="50%"| [[File:IG_Welded_Masonry_Support.png|300px|link=File:IG_Welded_Masonry_Support.png]]
|width="50%"|
A rigid Masonry Support System manufactured bespoke to accommodate projects with very specific requirements, eg. reduced cavity widths or increased loading.

IG’s Welded Shelf Systems are fabricated to engineer specifications and design assistance will be provided by the IG technical team.

[http://igmasonrysupport.com/ig-welded-masonry-support/ Read More]
|}

== IG Brick Slip Lintels ==

{|
|width="50%"| [[File:IG_Brick_Slip_Lintels.png|300px|link=File:IG_Brick_Slip_Lintels.png]]
|width="50%"|
IG’s Brick Slip Lintels can be used over small openings and eliminate the need for additional masonry supports.

Supplied in stainless steel or galvanised steel, IG’s Brick Slip Lintels have the same profile as a standard lintel and are delivered to site as a one piece unit complete with brick slips attached eliminating the need for specialist installation on-site.

[http://igmasonrysupport.com/ig-brick-slip-lintels/ Read More]
|}

== IG Brick Slip Masonry Support ==

{|
|width="50%"| [[File:IG_Brick_Slip_Masonry_Support.png|300px|link=File:IG_Brick_Slip_Masonry_Support.png]]
|width="50%"|
IG’s Brick Slip Masonry Support Systems are one piece prefabricated units manufactured off-site and delivered to site complete with bricks bonded to them. This system offers a major reduction in on-site labour and installation time. All solutions are customised to your requirements.

IG’s bespoke components use our patented adhesion system and are delivered to site as a complete unit ready for installation.

[http://igmasonrysupport.com/ig-brick-slip-masonry-support/ Read More]
|}

== IG Brick Slip Soffit Panels ==

{|
|width="50%"| [[File:IG_Brick_Slip_Soffit_Panels.png|300px|link=File:IG_Brick_Slip_Soffit_Panels.png]]
|width="50%"|
IG’s Brick Slip Masonry Support Systems are one piece prefabricated units manufactured off-site and delivered to site complete with bricks bonded to them. This system offers a major reduction in on-site labour and installation time. All solutions are customised to your requirements.IG’s bespoke components use our patented adhesion system and are delivered to site as a complete unit ready for installation.

[http://igmasonrysupport.com/ig-brick-slip-soffit-panels/ Read More]
|}

For more information please [http://igmasonrysupport.com/contact-us/ contact us].

User:IG Masonry Support

2020-09-21T16:13:16Z

IG Masonry Support:

IG Masonry Support has combined experience with innovation to provide the most practical and advanced range of Masonry Support products on the market. Offering optimum performance and design flexibility, IG Masonry Support has also developed a revolutionary brick on soffit system which radically reduces on site labour. IG provides comprehensive technical support for all our masonry support products. Our free scheduling and specification service offers fast turnaround on masonry support and windpost systems. 
Our experienced team of over forty structural and civil engineers offer a free design service and on-site support offering a range of off the shelf and bespoke solutions.

{|
|width="100%"|
{|
|width="100%"|
{|
|width="100%"|
== Contents ==

* [[#Contents|1 Contents]]
* [[#Contents_2|2 Contents]]
* [[#Products|3 Products]]
** [[#IG_Keyfix|3.1 IG Keyfix]]
** [[#IG_Brick_On_Soffit_System_.28B.O.S.S_.2B.C2.AE.29|3.2 IG Brick On Soffit System (B.O.S.S +®)]]
** [[#IG_Brick_On_Soffit_System_.28B.O.S.S_.2B.C2.AE.29_2|3.3 IG Brick On Soffit System (B.O.S.S +®)]]
** [[#IG_Titan_System|3.4 IG Titan System]]
** [[#IG_Welded_Masonry_Support|3.5 IG Welded Masonry Support]]
** [[#IG_Brick_Slip_Lintels|3.6 IG Brick Slip Lintels]]
** [[#IG_Brick_Slip_Masonry_Support|3.7 IG Brick Slip Masonry Support]]
** [[#IG_Brick_Slip_Soffit_Panels|3.8 IG Brick Slip Soffit Panels]]
|}
|}
|}

= Products =

== IG Keyfix ==

{|
|width="50%"| [[File:IG_Key_Fix_v2.png|300px|link=File:IG_Key_Fix_v2.png]]
|width="50%"|
Keyfix is setting new standards in the delivery of non-combustible (NC) cavity systems for projects requiring Document B compliance in buildings over 18m high utilising steel frame systems in the external cavity. Our innovative NC range of A1 fire rated cavity trays is a practical solution to provide DPC protection over lintels, masonry supports, soffit systems and other elements in the cavity such as fire barriers etc.

[http://igmasonrysupport.com/ig-keyfix/ Read More]
|}

== IG Brick On Soffit System (B.O.S.S +®) ==

{|
|width="50%"| [[File:IG_BOSS.png|300px|link=File:IG_BOSS.png]]
|width="50%"|
B.O.S.S.+ is an innovative lightweight Brick Slip Soffit System, with the added security of mechanically fixed brick slips. An extension of the Brick On Soffit System (B.O.S.S.), this BBA certified unit is suitable for use on residential buildings over 18m above ground level and complies with the Building Regulations 2010* Approved Document B:Fire Safety.

[http://igmasonrysupport.com/boss-plus/ Read More]
|}

== IG Brick On Soffit System (B.O.S.S +®) ==

{|
|width="50%"| [[File:IG_BOSS_2.png|300px|link=File:IG_BOSS_2.png]]
|width="50%"|
The B.O.S.S.® range provides a lighter alternative to concrete, which is faster to install than traditional hanging brick systems. Installed to a pre-fitted masonry support system, B.O.S.S.® allows increased adjustability along three axes. Produced offsite, B.O.S.S.® offers a quicker, lighter, easier and more cost efficient option.

[http://igmasonrysupport.com/ig-brick-on-soffit-system/ Read More]
|}

== IG Titan System ==

{|
|width="50%"| [[File:IG_Titan_System.png|300px|link=File:IG_Titan_System.png]]
|width="50%"|
IG’s Titan System is designed to meet with the industry’s demand for speed of construction. All configurations are available ex-stock meeting all the builder’s needs.

This system offers a range of bracket sizes to accommodate various cavity widths. IG Titan is a fully adjustable system accommodating loads up to 14 kN/m.

[http://igmasonrysupport.com/ig-titan-system/ Read More]
|}

== IG Welded Masonry Support ==

{|
|width="50%"| [[File:IG_Welded_Masonry_Support.png|300px|link=File:IG_Welded_Masonry_Support.png]]
|width="50%"|
A rigid Masonry Support System manufactured bespoke to accommodate projects with very specific requirements, eg. reduced cavity widths or increased loading.

IG’s Welded Shelf Systems are fabricated to engineer specifications and design assistance will be provided by the IG technical team.

[http://igmasonrysupport.com/ig-welded-masonry-support/ Read More]
|}

== IG Brick Slip Lintels ==

{|
|width="50%"| [[File:IG_Brick_Slip_Lintels.png|300px|link=File:IG_Brick_Slip_Lintels.png]]
|width="50%"|
IG’s Brick Slip Lintels can be used over small openings and eliminate the need for additional masonry supports.

Supplied in stainless steel or galvanised steel, IG’s Brick Slip Lintels have the same profile as a standard lintel and are delivered to site as a one piece unit complete with brick slips attached eliminating the need for specialist installation on-site.

[http://igmasonrysupport.com/ig-brick-slip-lintels/ Read More]
|}

== IG Brick Slip Masonry Support ==

{|
|width="50%"| [[File:IG_Brick_Slip_Masonry_Support.png|300px|link=File:IG_Brick_Slip_Masonry_Support.png]]
|width="50%"|
IG’s Brick Slip Masonry Support Systems are one piece prefabricated units manufactured off-site and delivered to site complete with bricks bonded to them. This system offers a major reduction in on-site labour and installation time. All solutions are customised to your requirements.

IG’s bespoke components use our patented adhesion system and are delivered to site as a complete unit ready for installation.

[http://igmasonrysupport.com/ig-brick-slip-masonry-support/ Read More]
|}

== IG Brick Slip Soffit Panels ==

{|
|width="50%"| [[File:IG_Brick_Slip_Soffit_Panels.png|300px|link=File:IG_Brick_Slip_Soffit_Panels.png]]
|width="50%"|
IG’s Brick Slip Masonry Support Systems are one piece prefabricated units manufactured off-site and delivered to site complete with bricks bonded to them. This system offers a major reduction in on-site labour and installation time. All solutions are customised to your requirements.IG’s bespoke components use our patented adhesion system and are delivered to site as a complete unit ready for installation.

[http://igmasonrysupport.com/ig-brick-slip-soffit-panels/ Read More]
|}

For more information please [http://igmasonrysupport.com/contact-us/ contact us].

User:IG Masonry Support

2020-09-21T16:10:49Z

IG Masonry Support:

IG Masonry Support has combined experience with innovation to provide the most practical and advanced range of Masonry Support products on the market. Offering optimum performance and design flexibility, IG Masonry Support has also developed a revolutionary brick on soffit system which radically reduces on site labour. IG provides comprehensive technical support for all our masonry support products. Our free scheduling and specification service offers fast turnaround on masonry support and windpost systems. 
Our experienced team of over forty structural and civil engineers offer a free design service and on-site support offering a range of off the shelf and bespoke solutions.

{|
|width="100%"|
{|
|width="100%"|
== Contents ==

* [[#Contents|1 Contents]]
* [[#Products|2 Products]]
** [[#IG_Keyfix|2.1 IG Keyfix]]
** [[#IG_Brick_On_Soffit_System_.28B.O.S.S_.2B.C2.AE.29|2.2 IG Brick On Soffit System (B.O.S.S +®)]]
** [[#IG_Brick_On_Soffit_System_.28B.O.S.S_.2B.C2.AE.29_2|2.3 IG Brick On Soffit System (B.O.S.S +®)]]
** [[#IG_Titan_System|2.4 IG Titan System]]
** [[#IG_Welded_Masonry_Support|2.5 IG Welded Masonry Support]]
** [[#IG_Brick_Slip_Lintels|2.6 IG Brick Slip Lintels]]
** [[#IG_Brick_Slip_Masonry_Support|2.7 IG Brick Slip Masonry Support]]
** [[#IG_Brick_Slip_Soffit_Panels|2.8 IG Brick Slip Soffit Panels]]
|}

== Contents ==

* [[#Products|1 Products]]
** [[#IG_Keyfix|1.1 IG Keyfix]]
** [[#IG_Brick_On_Soffit_System_.28B.O.S.S_.2B.C2.AE.29|1.2 IG Brick On Soffit System (B.O.S.S +®)]]
** [[#IG_Brick_On_Soffit_System_.28B.O.S.S_.2B.C2.AE.29_2|1.3 IG Brick On Soffit System (B.O.S.S +®)]]
** [[#IG_Titan_System|1.4 IG Titan System]]
** [[#IG_Welded_Masonry_Support|1.5 IG Welded Masonry Support]]
** [[#IG_Brick_Slip_Lintels|1.6 IG Brick Slip Lintels]]
** [[#IG_Brick_Slip_Masonry_Support|1.7 IG Brick Slip Masonry Support]]
** [[#IG_Brick_Slip_Soffit_Panels|1.8 IG Brick Slip Soffit Panels]]
|}

= Products =

== IG Keyfix ==

{|
|width="50%"| [[File:IG_Key_Fix_v2.png|300px|link=File:IG_Key_Fix_v2.png]]
|width="50%"|
Keyfix is setting new standards in the delivery of non-combustible (NC) cavity systems for projects requiring Document B compliance in buildings over 18m high utilising steel frame systems in the external cavity. Our innovative NC range of A1 fire rated cavity trays is a practical solution to provide DPC protection over lintels, masonry supports, soffit systems and other elements in the cavity such as fire barriers etc.

[http://igmasonrysupport.com/ig-keyfix/ Read More]
|}

== IG Brick On Soffit System (B.O.S.S +®) ==

{|
|width="50%"| [[File:IG_BOSS.png|300px|link=File:IG_BOSS.png]]
|width="50%"|
B.O.S.S.+ is an innovative lightweight Brick Slip Soffit System, with the added security of mechanically fixed brick slips. An extension of the Brick On Soffit System (B.O.S.S.), this BBA certified unit is suitable for use on residential buildings over 18m above ground level and complies with the Building Regulations 2010* Approved Document B:Fire Safety.

[http://igmasonrysupport.com/boss-plus/ Read More]
|}

== IG Brick On Soffit System (B.O.S.S +®) ==

{|
|width="50%"| [[File:IG_BOSS_2.png|300px|link=File:IG_BOSS_2.png]]
|width="50%"|
The B.O.S.S.® range provides a lighter alternative to concrete, which is faster to install than traditional hanging brick systems. Installed to a pre-fitted masonry support system, B.O.S.S.® allows increased adjustability along three axes. Produced offsite, B.O.S.S.® offers a quicker, lighter, easier and more cost efficient option.

[http://igmasonrysupport.com/ig-brick-on-soffit-system/ Read More]
|}

== IG Titan System ==

{|
|width="50%"| [[File:IG_Titan_System.png|300px|link=File:IG_Titan_System.png]]
|width="50%"|
IG’s Titan System is designed to meet with the industry’s demand for speed of construction. All configurations are available ex-stock meeting all the builder’s needs.

This system offers a range of bracket sizes to accommodate various cavity widths. IG Titan is a fully adjustable system accommodating loads up to 14 kN/m.

[http://igmasonrysupport.com/ig-titan-system/ Read More]
|}

== IG Welded Masonry Support ==

{|
|width="50%"| [[File:IG_Welded_Masonry_Support.png|300px|link=File:IG_Welded_Masonry_Support.png]]
|width="50%"|
A rigid Masonry Support System manufactured bespoke to accommodate projects with very specific requirements, eg. reduced cavity widths or increased loading.

IG’s Welded Shelf Systems are fabricated to engineer specifications and design assistance will be provided by the IG technical team.

[http://igmasonrysupport.com/ig-welded-masonry-support/ Read More]
|}

== IG Brick Slip Lintels ==

{|
|width="50%"| [[File:IG_Brick_Slip_Lintels.png|300px|link=File:IG_Brick_Slip_Lintels.png]]
|width="50%"|
IG’s Brick Slip Lintels can be used over small openings and eliminate the need for additional masonry supports.

Supplied in stainless steel or galvanised steel, IG’s Brick Slip Lintels have the same profile as a standard lintel and are delivered to site as a one piece unit complete with brick slips attached eliminating the need for specialist installation on-site.

[http://igmasonrysupport.com/ig-brick-slip-lintels/ Read More]
|}

== IG Brick Slip Masonry Support ==

{|
|width="50%"| [[File:IG_Brick_Slip_Masonry_Support.png|300px|link=File:IG_Brick_Slip_Masonry_Support.png]]
|width="50%"|
IG’s Brick Slip Masonry Support Systems are one piece prefabricated units manufactured off-site and delivered to site complete with bricks bonded to them. This system offers a major reduction in on-site labour and installation time. All solutions are customised to your requirements.

IG’s bespoke components use our patented adhesion system and are delivered to site as a complete unit ready for installation.

[http://igmasonrysupport.com/ig-brick-slip-masonry-support/ Read More]
|}

== IG Brick Slip Soffit Panels ==

{|
|width="50%"| [[File:IG_Brick_Slip_Soffit_Panels.png|300px|link=File:IG_Brick_Slip_Soffit_Panels.png]]
|width="50%"|
IG’s Brick Slip Masonry Support Systems are one piece prefabricated units manufactured off-site and delivered to site complete with bricks bonded to them. This system offers a major reduction in on-site labour and installation time. All solutions are customised to your requirements.IG’s bespoke components use our patented adhesion system and are delivered to site as a complete unit ready for installation.

[http://igmasonrysupport.com/ig-brick-slip-soffit-panels/ Read More]
|}

For more information please [http://igmasonrysupport.com/contact-us/ contact us].

User:IG Masonry Support

2020-09-21T16:08:57Z

IG Masonry Support:

IG Masonry Support has combined experience with innovation to provide the most practical and advanced range of Masonry Support products on the market. Offering optimum performance and design flexibility, IG Masonry Support has also developed a revolutionary brick on soffit system which radically reduces on site labour. IG provides comprehensive technical support for all our masonry support products. Our free scheduling and specification service offers fast turnaround on masonry support and windpost systems. 
Our experienced team of over forty structural and civil engineers offer a free design service and on-site support offering a range of off the shelf and bespoke solutions.

{|
|width="100%"|
== Contents ==

* [[#Products|1 Products]]
** [[#IG_Keyfix|1.1 IG Keyfix]]
** [[#IG_Brick_On_Soffit_System_.28B.O.S.S_.2B.C2.AE.29|1.2 IG Brick On Soffit System (B.O.S.S +®)]]
** [[#IG_Brick_On_Soffit_System_.28B.O.S.S_.2B.C2.AE.29_2|1.3 IG Brick On Soffit System (B.O.S.S +®)]]
** [[#IG_Titan_System|1.4 IG Titan System]]
** [[#IG_Welded_Masonry_Support|1.5 IG Welded Masonry Support]]
** [[#IG_Brick_Slip_Lintels|1.6 IG Brick Slip Lintels]]
** [[#IG_Brick_Slip_Masonry_Support|1.7 IG Brick Slip Masonry Support]]
** [[#IG_Brick_Slip_Soffit_Panels|1.8 IG Brick Slip Soffit Panels]]
|}

= Products =

== IG Keyfix ==

{|
|width="50%"| [[File:IG_Key_Fix_v2.png|300px|link=File:IG_Key_Fix_v2.png]]
|width="50%"|
Keyfix is setting new standards in the delivery of non-combustible (NC) cavity systems for projects requiring Document B compliance in buildings over 18m high utilising steel frame systems in the external cavity. Our innovative NC range of A1 fire rated cavity trays is a practical solution to provide DPC protection over lintels, masonry supports, soffit systems and other elements in the cavity such as fire barriers etc.

[http://igmasonrysupport.com/ig-keyfix/ Read More]
|}

== IG Brick On Soffit System (B.O.S.S +®) ==

{|
|width="50%"| [[File:IG_BOSS.png|300px|link=File:IG_BOSS.png]]
|width="50%"|
B.O.S.S.+ is an innovative lightweight Brick Slip Soffit System, with the added security of mechanically fixed brick slips. An extension of the Brick On Soffit System (B.O.S.S.), this BBA certified unit is suitable for use on residential buildings over 18m above ground level and complies with the Building Regulations 2010* Approved Document B:Fire Safety.

[http://igmasonrysupport.com/boss-plus/ Read More]
|}

== IG Brick On Soffit System (B.O.S.S +®) ==

{|
|width="50%"| [[File:IG_BOSS_2.png|300px|link=File:IG_BOSS_2.png]]
|width="50%"|
The B.O.S.S.® range provides a lighter alternative to concrete, which is faster to install than traditional hanging brick systems. Installed to a pre-fitted masonry support system, B.O.S.S.® allows increased adjustability along three axes. Produced offsite, B.O.S.S.® offers a quicker, lighter, easier and more cost efficient option.

[http://igmasonrysupport.com/ig-brick-on-soffit-system/ Read More]
|}

== IG Titan System ==

{|
|width="50%"| [[File:IG_Titan_System.png|300px|link=File:IG_Titan_System.png]]
|width="50%"|
IG’s Titan System is designed to meet with the industry’s demand for speed of construction. All configurations are available ex-stock meeting all the builder’s needs.

This system offers a range of bracket sizes to accommodate various cavity widths. IG Titan is a fully adjustable system accommodating loads up to 14 kN/m.

[http://igmasonrysupport.com/ig-titan-system/ Read More]
|}

== IG Welded Masonry Support ==

{|
|width="50%"| [[File:IG_Welded_Masonry_Support.png|300px|link=File:IG_Welded_Masonry_Support.png]]
|width="50%"|
A rigid Masonry Support System manufactured bespoke to accommodate projects with very specific requirements, eg. reduced cavity widths or increased loading.

IG’s Welded Shelf Systems are fabricated to engineer specifications and design assistance will be provided by the IG technical team.

[http://igmasonrysupport.com/ig-welded-masonry-support/ Read More]
|}

== IG Brick Slip Lintels ==

{|
|width="50%"| [[File:IG_Brick_Slip_Lintels.png|300px|link=File:IG_Brick_Slip_Lintels.png]]
|width="50%"|
IG’s Brick Slip Lintels can be used over small openings and eliminate the need for additional masonry supports.

Supplied in stainless steel or galvanised steel, IG’s Brick Slip Lintels have the same profile as a standard lintel and are delivered to site as a one piece unit complete with brick slips attached eliminating the need for specialist installation on-site.

[http://igmasonrysupport.com/ig-brick-slip-lintels/ Read More]
|}

== IG Brick Slip Masonry Support ==

{|
|width="50%"| [[File:IG_Brick_Slip_Masonry_Support.png|300px|link=File:IG_Brick_Slip_Masonry_Support.png]]
|width="50%"|
IG’s Brick Slip Masonry Support Systems are one piece prefabricated units manufactured off-site and delivered to site complete with bricks bonded to them. This system offers a major reduction in on-site labour and installation time. All solutions are customised to your requirements.

IG’s bespoke components use our patented adhesion system and are delivered to site as a complete unit ready for installation.

[http://igmasonrysupport.com/ig-brick-slip-masonry-support/ Read More]
|}

== IG Brick Slip Soffit Panels ==

{|
|width="50%"| [[File:IG_Brick_Slip_Soffit_Panels.png|300px|link=File:IG_Brick_Slip_Soffit_Panels.png]]
|width="50%"|
IG’s Brick Slip Masonry Support Systems are one piece prefabricated units manufactured off-site and delivered to site complete with bricks bonded to them. This system offers a major reduction in on-site labour and installation time. All solutions are customised to your requirements.IG’s bespoke components use our patented adhesion system and are delivered to site as a complete unit ready for installation.

[http://igmasonrysupport.com/ig-brick-slip-soffit-panels/ Read More]
|}

For more information please [http://igmasonrysupport.com/contact-us/ contact us].

User:IG Masonry Support

2020-09-07T14:36:51Z

IG Masonry Support:

User:IG Masonry Support

2020-09-07T14:35:36Z

IG Masonry Support:

IG Masonry Support has combined experience with innovation to provide the most practical and advanced range of Masonry Support products on the market. Offering optimum performance and design flexibility, IG Masonry Support has also developed a revolutionary brick on soffit system which radically reduces on site labour. IG provides comprehensive technical support for all our masonry support products. Our free scheduling and specification service offers fast turnaround on masonry support and windpost systems. 
Our experienced team of over forty structural and civil engineers offer a free design service and on-site support offering a range of off the shelf and bespoke solutions.

{|
|width="100%"|
{|
|width="100%"|
== Contents ==

* [[#Contents|1 Contents]]
* [[#Products|2 Products]]
** [[#IG_Keyfix|2.1 IG Keyfix]]
** [[#IG_Brick_On_Soffit_System_.28B.O.S.S_.2B.C2.AE.29|2.2 IG Brick On Soffit System (B.O.S.S +®)]]
** [[#IG_Brick_On_Soffit_System_.28B.O.S.S_.2B.C2.AE.29_2|2.3 IG Brick On Soffit System (B.O.S.S +®)]]
** [[#IG_Titan_System|2.4 IG Titan System]]
** [[#IG_Welded_Masonry_Support|2.5 IG Welded Masonry Support]]
** [[#IG_Brick_Slip_Lintels|2.6 IG Brick Slip Lintels]]
|}

== Contents ==

* [[#Products|1 Products]]
** [[#IG_Keyfix|1.1 IG Keyfix]]
** [[#IG_Brick_On_Soffit_System_.28B.O.S.S_.2B.C2.AE.29|1.2 IG Brick On Soffit System (B.O.S.S +®)]]
** [[#IG_Brick_On_Soffit_System_.28B.O.S.S_.2B.C2.AE.29_2|1.3 IG Brick On Soffit System (B.O.S.S +®)]]
** [[#IG_Titan_System|1.4 IG Titan System]]
|}

= Products =

== IG Keyfix ==

{|
|width="50%"| [[File:IG_Key_Fix_v2.png|300px|link=File:IG_Key_Fix_v2.png]]
|width="50%"|
Keyfix is setting new standards in the delivery of non-combustible (NC) cavity systems for projects requiring Document B compliance in buildings over 18m high utilising steel frame systems in the external cavity. Our innovative NC range of A1 fire rated cavity trays is a practical solution to provide DPC protection over lintels, masonry supports, soffit systems and other elements in the cavity such as fire barriers etc.

[http://igmasonrysupport.com/ig-keyfix/ Read More]
|}

== IG Brick On Soffit System (B.O.S.S +®) ==

{|
|width="50%"| [[File:IG_BOSS.png|300px|link=File:IG_BOSS.png]]
|width="50%"|
B.O.S.S.+ is an innovative lightweight Brick Slip Soffit System, with the added security of mechanically fixed brick slips. An extension of the Brick On Soffit System (B.O.S.S.), this BBA certified unit is suitable for use on residential buildings over 18m above ground level and complies with the Building Regulations 2010* Approved Document B:Fire Safety.

[http://igmasonrysupport.com/boss-plus/ Read More]
|}

== IG Brick On Soffit System (B.O.S.S +®) ==

{|
|width="50%"| [[File:IG_BOSS_2.png|300px|link=File:IG_BOSS_2.png]]
|width="50%"|
The B.O.S.S.® range provides a lighter alternative to concrete, which is faster to install than traditional hanging brick systems. Installed to a pre-fitted masonry support system, B.O.S.S.® allows increased adjustability along three axes. Produced offsite, B.O.S.S.® offers a quicker, lighter, easier and more cost efficient option.

[http://igmasonrysupport.com/ig-brick-on-soffit-system/ Read More]
|}

== IG Titan System ==

{|
|width="50%"| [[File:IG_Titan_System.png|300px|link=File:IG_Titan_System.png]]
|width="50%"|
IG’s Titan System is designed to meet with the industry’s demand for speed of construction. All configurations are available ex-stock meeting all the builder’s needs.

This system offers a range of bracket sizes to accommodate various cavity widths. IG Titan is a fully adjustable system accommodating loads up to 14 kN/m.

[http://igmasonrysupport.com/ig-titan-system/ Read More]
|}

== IG Welded Masonry Support ==

{|
|width="50%"| [[File:IG_Welded_Masonry_Support.png|300px|link=File:IG_Welded_Masonry_Support.png]]
|width="50%"|
A rigid Masonry Support System manufactured bespoke to accommodate projects with very specific requirements, eg. reduced cavity widths or increased loading.

IG’s Welded Shelf Systems are fabricated to engineer specifications and design assistance will be provided by the IG technical team.

[http://igmasonrysupport.com/ig-welded-masonry-support/ Read More]
|}

== IG Brick Slip Lintels ==

{|
|width="50%"| [[File:IG_Brick_Slip_Lintels.png|300px|link=File:IG_Brick_Slip_Lintels.png]]
|width="50%"|
IG’s Brick Slip Lintels can be used over small openings and eliminate the need for additional masonry supports.

Supplied in stainless steel or galvanised steel, IG’s Brick Slip Lintels have the same profile as a standard lintel and are delivered to site as a one piece unit complete with brick slips attached eliminating the need for specialist installation on-site.

[http://igmasonrysupport.com/ig-brick-slip-lintels/ Read More]
|}

== IG Brick Slip Masonry Support ==

{|
|width="50%"| [[File:IG Brick Slip Masonry Support.png]]
|width="50%"|
IG’s Brick Slip Masonry Support Systems are one piece prefabricated units manufactured off-site and delivered to site complete with bricks bonded to them. This system offers a major reduction in on-site labour and installation time. All solutions are customised to your requirements.

IG’s bespoke components use our patented adhesion system and are delivered to site as a complete unit ready for installation.

[http://igmasonrysupport.com/ig-brick-slip-masonry-support/ Read More]
|}

== IG Brick Slip Soffit Panels ==

{|
|width="50%"| [[File:IG Brick Slip Soffit Panels.png]]
|width="50%"|
IG’s Brick Slip Masonry Support Systems are one piece prefabricated units manufactured off-site and delivered to site complete with bricks bonded to them. This system offers a major reduction in on-site labour and installation time. All solutions are customised to your requirements.IG’s bespoke components use our patented adhesion system and are delivered to site as a complete unit ready for installation.

[http://igmasonrysupport.com/ig-brick-slip-soffit-panels/ Read More]
|}

For more information please [http://igmasonrysupport.com/contact-us/ contact us].

File:IG Brick Slip Soffit Panels.png

2020-09-07T14:34:11Z

IG Masonry Support:

File:IG Brick Slip Masonry Support.png

2020-09-07T14:30:53Z

IG Masonry Support:

User:IG Masonry Support

2020-09-07T14:27:11Z

IG Masonry Support:

File:IG Brick Slip Lintels.png

2020-09-07T14:26:51Z

IG Masonry Support:

File:IG Welded Masonry Support.png

2020-09-07T14:21:42Z

IG Masonry Support:

User:IG Masonry Support

2020-09-07T14:16:46Z

IG Masonry Support:

File:IG Titan System.png

2020-09-07T14:16:17Z

IG Masonry Support:

File:IG BOSS 2.png

2020-09-07T14:09:12Z

IG Masonry Support:

User:IG Masonry Support

2020-09-07T14:03:59Z

IG Masonry Support:

File:IG BOSS.png

2020-09-07T14:01:55Z

IG Masonry Support:

User:IG Masonry Support

2020-09-07T13:57:10Z

IG Masonry Support:

File:IG Key Fix v2.png

2020-09-07T13:56:38Z

IG Masonry Support:

File:IG Key Fix.png

2020-09-07T13:54:34Z

IG Masonry Support:

User:IG Masonry Support

2020-09-07T13:51:30Z

IG Masonry Support: