Uniclass 2 - Revision history

Editor at 11:23, 7 January 2022

2022-01-07T11:23:50Z

← Older revision		Revision as of 11:23, 7 January 2022
Line 26:		Line 26:
	NB The Common Arrangement of Work Sections (CAWS), a consistent arrangement for specifications and bills of quantities, also developed by CPIC was incorporated into Table J of Uniclass. However, the New Rules of Measurement (NRM2) has moved away from CAWS (which was adopted by its predecessor, the Standard Method of Measurement (SMM7)) and has adopted its own system of indexing.		NB The Common Arrangement of Work Sections (CAWS), a consistent arrangement for specifications and bills of quantities, also developed by CPIC was incorporated into Table J of Uniclass. However, the New Rules of Measurement (NRM2) has moved away from CAWS (which was adopted by its predecessor, the Standard Method of Measurement (SMM7)) and has adopted its own system of indexing.

−	~~= Find out more =~~	+	= Related articles on Designing Buildings =
−		+
−	=== Related articles on Designing Buildings ~~Wiki ==~~=	+

	* Bills of quantities.		* Bills of quantities.
Line 39:		Line 37:
	* Standard Method of Measurement (SMM7).		* Standard Method of Measurement (SMM7).
	* Uniclass.		* Uniclass.
		+	* Uniclass advisory board created.
	* Uniclass 1.4 legacy release.		* Uniclass 1.4 legacy release.
	* Uniclass2 development release classification (2014).		* Uniclass2 development release classification (2014).
Line 47:		Line 46:
	* [http://www.cpic.org.uk/uniclass2/ CPIC website.]		* [http://www.cpic.org.uk/uniclass2/ CPIC website.]

−	[[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:DCN_Standard~~]] [[Category:BIM~~]] [[Category:Standards_/_measurements]] [[Category:Cost_/_business_planning]] [[Category:Products_/_components]]	+	[[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:DCN_Standard]] [[Category:Standards_/_measurements]] [[Category:Cost_/_business_planning]] [[Category:Products_/_components]] [[Category:BIM]]

Designing Buildings at 06:14, 10 October 2020

2020-10-10T06:14:50Z

← Older revision		Revision as of 06:14, 10 October 2020
Line 47:		Line 47:
	* [http://www.cpic.org.uk/uniclass2/ CPIC website.]		* [http://www.cpic.org.uk/uniclass2/ CPIC website.]

−	[[Category:~~Standards_/_measurements~~]] [[Category:DCN_Standard]] [[Category:~~Cost_/_business_planning~~]] [[Category:~~Products_~~/~~_components~~]] [[Category:~~DCN_Product_Knowledge~~]] [[Category:~~BIM~~]]	+	[[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:DCN_Standard]] [[Category:BIM]] [[Category:Standards_/_measurements]] [[Category:Cost_/_business_planning]] [[Category:Products_/_components]]

Editor at 11:41, 16 March 2017

2017-03-16T11:41:20Z

← Older revision		Revision as of 11:41, 16 March 2017
Line 31:		Line 31:

	* Bills of quantities.		* Bills of quantities.
		+	* CI/SfB.
	* Classification, an introduction.		* Classification, an introduction.
	* Comparison of SMM7 with NRM2.		* Comparison of SMM7 with NRM2.
Line 46:		Line 47:
	* [http://www.cpic.org.uk/uniclass2/ CPIC website.]		* [http://www.cpic.org.uk/uniclass2/ CPIC website.]

−	[[Category:Standards_/_measurements]] [[Category:Cost_/_business_planning]] [[Category:Products_/_components]] [[Category:BIM]]	+	[[Category:Standards_/_measurements]] [[Category:DCN_Standard]] [[Category:Cost_/_business_planning]] [[Category:Products_/_components]] [[Category:DCN_Product_Knowledge]] [[Category:BIM]]

Editor at 13:33, 14 March 2017

2017-03-14T13:33:44Z

← Older revision		Revision as of 13:33, 14 March 2017
Line 35:		Line 35:
	* Construction Project Information Committee.		* Construction Project Information Committee.
	* New Rules of Measurement.		* New Rules of Measurement.
		+	* OmniClass.
	* Standard Method of Measurement (SMM7).		* Standard Method of Measurement (SMM7).
	* Uniclass.		* Uniclass.

Designing Buildings at 09:06, 11 March 2017

2017-03-11T09:06:47Z

← Older revision		Revision as of 09:06, 11 March 2017
Line 31:		Line 31:

	* Bills of quantities.		* Bills of quantities.
		+	* Classification, an introduction.
	* Comparison of SMM7 with NRM2.		* Comparison of SMM7 with NRM2.
	* Construction Project Information Committee.		* Construction Project Information Committee.

Designing Buildings at 16:12, 8 July 2016

2016-07-08T16:12:03Z

← Older revision		Revision as of 16:12, 8 July 2016
Line 1:		Line 1:
−
	NB Uniclass 2 has been renamed 'Uniclass 2015'.		NB Uniclass 2 has been renamed 'Uniclass 2015'.

−	----	+	-----
−		+
	Uniclass is a voluntary classification system for the construction industry that can be used for organising information throughout all aspects of the design and construction process, including; office management, project information, cost information, specifications, and so on. Adopting a standard classification facilitates interoperability between different systems.		Uniclass is a voluntary classification system for the construction industry that can be used for organising information throughout all aspects of the design and construction process, including; office management, project information, cost information, specifications, and so on. Adopting a standard classification facilitates interoperability between different systems.

	Uniclass was created in 1997 by the Construction Project Information committee (CPIC), a pan-industry organisation with representatives from key industry institutes. The latest version of the original classification was Uniclass 1.4. However, it was criticised for not being genuinely unified, for inconsistencies between the labelling and depth of tables, for poor integration of civil engineering and building works and for being an essentially paper-based system.		Uniclass was created in 1997 by the Construction Project Information committee (CPIC), a pan-industry organisation with representatives from key industry institutes. The latest version of the original classification was Uniclass 1.4. However, it was criticised for not being genuinely unified, for inconsistencies between the labelling and depth of tables, for poor integration of civil engineering and building works and for being an essentially paper-based system.

−	As a result CPI developed a new version, Uniclass 2. CPIC stated that ~~‘Uniclass~~ 2 has been developed to produce a classification system for structuring information that is freely available for all participants throughout the life cycle of a project and beyond, which is endorsed by all construction and property bodies and professional institutions. It is dynamic, available online in various formats and managed by a team of experts who will monitor requests, update and control versioning.’ (ref [http://www.cpic.org.uk/uniclass2/#classification CPIC])	+	As a result CPI developed a new version, Uniclass 2. CPIC stated that 'Uniclass 2 has been developed to produce a classification system for structuring information that is freely available for all participants throughout the life cycle of a project and beyond, which is endorsed by all construction and property bodies and professional institutions. It is dynamic, available online in various formats and managed by a team of experts who will monitor requests, update and control versioning.' (ref [http://www.cpic.org.uk/uniclass2/#classification CPIC])

	Uniclass 2 was made freely on the [http://www.cpic.org.uk/uniclass2/ CPIC website] under a [http://creativecommons.org/licenses/by-nd/3.0/deed.en_GB Creative Commons Attribution-NoDerivs 3.0 Unported License].		Uniclass 2 was made freely on the [http://www.cpic.org.uk/uniclass2/ CPIC website] under a [http://creativecommons.org/licenses/by-nd/3.0/deed.en_GB Creative Commons Attribution-NoDerivs 3.0 Unported License].

	The mapping between Uniclass 1.4 and Uniclass 2 was:		The mapping between Uniclass 1.4 and Uniclass 2 was:
−	*Ac - Activities is new to both ISO 12006-2 and to Uniclass
−	*Co - Complexes will replace parts of table D (Facilities)
−	*Ee - Elements will replace table G (Elements)
−	*En/EF - Entities will replace parts of table D (Facilities)
−	*PP - Project Phases is new to both ISO 12006-2 and to Uniclass
−	*Pr - Products will replace table L (Construction Products)
−	*Sp - Spaces will replace parts of table D (Facilities)
−	*Ss - Systems is new to both ISO 12006-2 and to Uniclass
−	*Zz - CAD is new to both ISO 12006-2 and to Uniclass

−	NB Following feedback received about Uniclass 2, changes were made, and a new version, Uniclass 2015 released. The most significant change is the removal of the Work Results table.~~<br/>~~	+	* Ac - Activities is new to both ISO 12006-2 and to Uniclass
		+	* Co - Complexes will replace parts of table D (Facilities)
		+	* Ee - Elements will replace table G (Elements)
		+	* En/EF - Entities will replace parts of table D (Facilities)
		+	* PP - Project Phases is new to both ISO 12006-2 and to Uniclass
		+	* Pr - Products will replace table L (Construction Products)
		+	* Sp - Spaces will replace parts of table D (Facilities)
		+	* Ss - Systems is new to both ISO 12006-2 and to Uniclass
		+	* Zz - CAD is new to both ISO 12006-2 and to Uniclass
		+
		+	NB Following feedback received about Uniclass 2, changes were made, and a new version, Uniclass 2015 released. The most significant change is the removal of the Work Results table.

	NB The Common Arrangement of Work Sections (CAWS), a consistent arrangement for specifications and bills of quantities, also developed by CPIC was incorporated into Table J of Uniclass. However, the New Rules of Measurement (NRM2) has moved away from CAWS (which was adopted by its predecessor, the Standard Method of Measurement (SMM7)) and has adopted its own system of indexing.		NB The Common Arrangement of Work Sections (CAWS), a consistent arrangement for specifications and bills of quantities, also developed by CPIC was incorporated into Table J of Uniclass. However, the New Rules of Measurement (NRM2) has moved away from CAWS (which was adopted by its predecessor, the Standard Method of Measurement (SMM7)) and has adopted its own system of indexing.
Line 30:		Line 29:

	=== Related articles on Designing Buildings Wiki ===		=== Related articles on Designing Buildings Wiki ===
−	*Bills of quantities.	+
−	*Comparison of SMM7 with NRM2.	+	* Bills of quantities.
−	*Construction Project Information Committee.	+	* Comparison of SMM7 with NRM2.
−	*New Rules of Measurement.	+	* Construction Project Information Committee.
−	*Standard Method of Measurement (SMM7).	+	* New Rules of Measurement.
−	*Uniclass.	+	* Standard Method of Measurement (SMM7).
−	*Uniclass 1.4 legacy release.	+	* Uniclass.
−	*Uniclass2 development release classification (2014).	+	* Uniclass 1.4 legacy release.
−	*Uniclass 2015.	+	* Uniclass2 development release classification (2014).
		+	* Uniclass 2015.

	=== External references ===		=== External references ===
−	*[http://www.cpic.org.uk/uniclass2/ CPIC website.]

−	[[Category:Standards_/_measurements]]	+	* [http://www.cpic.org.uk/uniclass2/ CPIC website.]
−	[[Category:Cost_/_business_planning]]	+
−	[[Category:Products_/_components]]	+	[[Category:Standards_/_measurements]] [[Category:Cost_/_business_planning]] [[Category:Products_/_components]] [[Category:BIM]]

Designing Buildings at 10:20, 20 April 2015

2015-04-20T10:20:36Z

← Older revision		Revision as of 10:20, 20 April 2015
Line 38:		Line 38:
	*Uniclass 1.4 legacy release.		*Uniclass 1.4 legacy release.
	*Uniclass2 development release classification (2014).		*Uniclass2 development release classification (2014).
		+	*Uniclass 2015.

	=== External references ===		=== External references ===

Designing Buildings at 09:28, 20 April 2015

2015-04-20T09:28:44Z

← Older revision		Revision as of 09:28, 20 April 2015
Line 23:		Line 23:
	*Zz - CAD is new to both ISO 12006-2 and to Uniclass		*Zz - CAD is new to both ISO 12006-2 and to Uniclass

−	NB Following feedback received about Uniclass 2, changes ~~where~~ made, and a new version, Uniclass 2015 released. The most significant change is the removal of the Work Results table.<br/>	+	NB Following feedback received about Uniclass 2, changes were made, and a new version, Uniclass 2015 released. The most significant change is the removal of the Work Results table.<br/>

	NB The Common Arrangement of Work Sections (CAWS), a consistent arrangement for specifications and bills of quantities, also developed by CPIC was incorporated into Table J of Uniclass. However, the New Rules of Measurement (NRM2) has moved away from CAWS (which was adopted by its predecessor, the Standard Method of Measurement (SMM7)) and has adopted its own system of indexing.		NB The Common Arrangement of Work Sections (CAWS), a consistent arrangement for specifications and bills of quantities, also developed by CPIC was incorporated into Table J of Uniclass. However, the New Rules of Measurement (NRM2) has moved away from CAWS (which was adopted by its predecessor, the Standard Method of Measurement (SMM7)) and has adopted its own system of indexing.

Designing Buildings at 09:27, 20 April 2015

2015-04-20T09:27:34Z

← Older revision		Revision as of 09:27, 20 April 2015
Line 8:		Line 8:
	Uniclass was created in 1997 by the Construction Project Information committee (CPIC), a pan-industry organisation with representatives from key industry institutes. The latest version of the original classification was Uniclass 1.4. However, it was criticised for not being genuinely unified, for inconsistencies between the labelling and depth of tables, for poor integration of civil engineering and building works and for being an essentially paper-based system.		Uniclass was created in 1997 by the Construction Project Information committee (CPIC), a pan-industry organisation with representatives from key industry institutes. The latest version of the original classification was Uniclass 1.4. However, it was criticised for not being genuinely unified, for inconsistencies between the labelling and depth of tables, for poor integration of civil engineering and building works and for being an essentially paper-based system.

−	As a result CPI ~~are developing~~ a new version, Uniclass 2. CPIC ~~state~~ ‘Uniclass 2 has been developed to produce a classification system for structuring information that is freely available for all participants throughout the life cycle of a project and beyond, which is endorsed by all construction and property bodies and professional institutions. It is dynamic, available online in various formats and managed by a team of experts who will monitor requests, update and control versioning.’ (ref [http://www.cpic.org.uk/uniclass2/#classification CPIC])	+	As a result CPI developed a new version, Uniclass 2. CPIC stated that ‘Uniclass 2 has been developed to produce a classification system for structuring information that is freely available for all participants throughout the life cycle of a project and beyond, which is endorsed by all construction and property bodies and professional institutions. It is dynamic, available online in various formats and managed by a team of experts who will monitor requests, update and control versioning.’ (ref [http://www.cpic.org.uk/uniclass2/#classification CPIC])

−	~~A development release of~~ Uniclass 2 is freely ~~available from~~ the [http://www.cpic.org.uk/uniclass2/ CPIC website] under a [http://creativecommons.org/licenses/by-nd/3.0/deed.en_GB Creative Commons Attribution-NoDerivs 3.0 Unported License].	+	Uniclass 2 was made freely on the [http://www.cpic.org.uk/uniclass2/ CPIC website] under a [http://creativecommons.org/licenses/by-nd/3.0/deed.en_GB Creative Commons Attribution-NoDerivs 3.0 Unported License].

−	~~CPIC report that the~~ mapping between Uniclass 1.4 and Uniclass 2 ~~is as follows~~:	+	The mapping between Uniclass 1.4 and Uniclass 2 was:
	*Ac - Activities is new to both ISO 12006-2 and to Uniclass		*Ac - Activities is new to both ISO 12006-2 and to Uniclass
	*Co - Complexes will replace parts of table D (Facilities)		*Co - Complexes will replace parts of table D (Facilities)
Line 23:		Line 23:
	*Zz - CAD is new to both ISO 12006-2 and to Uniclass		*Zz - CAD is new to both ISO 12006-2 and to Uniclass

−	~~Ref CPIC [http://www~~.~~cpic~~.~~org.uk~~/~~uniclass2/#classification Classification].~~	+	NB Following feedback received about Uniclass 2, changes where made, and a new version, Uniclass 2015 released. The most significant change is the removal of the Work Results table.<br/>

	NB The Common Arrangement of Work Sections (CAWS), a consistent arrangement for specifications and bills of quantities, also developed by CPIC was incorporated into Table J of Uniclass. However, the New Rules of Measurement (NRM2) has moved away from CAWS (which was adopted by its predecessor, the Standard Method of Measurement (SMM7)) and has adopted its own system of indexing.		NB The Common Arrangement of Work Sections (CAWS), a consistent arrangement for specifications and bills of quantities, also developed by CPIC was incorporated into Table J of Uniclass. However, the New Rules of Measurement (NRM2) has moved away from CAWS (which was adopted by its predecessor, the Standard Method of Measurement (SMM7)) and has adopted its own system of indexing.

Designing Buildings at 09:22, 20 April 2015

2015-04-20T09:22:10Z

← Older revision		Revision as of 09:22, 20 April 2015
Line 1:		Line 1:
		+
		+	NB Uniclass 2 has been renamed 'Uniclass 2015'.
		+
		+	----

	Uniclass is a voluntary classification system for the construction industry that can be used for organising information throughout all aspects of the design and construction process, including; office management, project information, cost information, specifications, and so on. Adopting a standard classification facilitates interoperability between different systems.		Uniclass is a voluntary classification system for the construction industry that can be used for organising information throughout all aspects of the design and construction process, including; office management, project information, cost information, specifications, and so on. Adopting a standard classification facilitates interoperability between different systems.