Target fabric energy efficiency rate - Revision history

Editor at 16:05, 19 October 2020

2020-10-19T16:05:45Z

← Older revision		Revision as of 16:05, 19 October 2020
Line 21:		Line 21:
	To guard against poor performance of individual elements, limiting fabric values are retained in Table 2 of approved document L1A and limiting building services efficiencies are set out in the Domestic Building Services Compliance Guide.		To guard against poor performance of individual elements, limiting fabric values are retained in Table 2 of approved document L1A and limiting building services efficiencies are set out in the Domestic Building Services Compliance Guide.

−	~~= Find out more =~~	+	= Related articles on Designing Buildings Wiki =
−		+
−	=== Related articles on Designing Buildings Wiki ===	+

	* 2013 changes to the approved documents for part L of the building regulations.		* 2013 changes to the approved documents for part L of the building regulations.
Line 31:		Line 29:
	* Building Regulations.		* Building Regulations.
	* Dwelling emission rate.		* Dwelling emission rate.
		+	* Fabric Energy Efficiency Standard FEES.
	* Limiting fabric parameters.		* Limiting fabric parameters.
	* Standard assessment procedure.		* Standard assessment procedure.

Designing Buildings at 06:28, 29 September 2020

2020-09-29T06:28:17Z

← Older revision		Revision as of 06:28, 29 September 2020
Line 42:		Line 42:
	* DCLG circular [https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/262950/131130__AD_L_Circular_Letter___annex__web_Final.pdf New and amended Approved Documents and new Building Services Compliance Guides to support the energy efficiency requirements of the Building Regulations]. 3 December 2013.		* DCLG circular [https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/262950/131130__AD_L_Circular_Letter___annex__web_Final.pdf New and amended Approved Documents and new Building Services Compliance Guides to support the energy efficiency requirements of the Building Regulations]. 3 December 2013.

−	[[Category:~~Regulations~~]] [[Category:DCN_Regulation]] [[Category:Sustainability]]	+	[[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:DCN_Policy]] [[Category:DCN_Regulation]] [[Category:Regulations]] [[Category:Sustainability]]

Designing Buildings at 14:04, 7 February 2018

2018-02-07T14:04:20Z

← Older revision		Revision as of 14:04, 7 February 2018
Line 1:		Line 1:
−
	Dwelling Fabric Energy Efficiency rates (DFEE) and Target Fabric Energy Efficiency rates (TFEE) were introduced by the 2013 edition of approved document L1A of the building regulations, 'Conservation of fuel and power in new dwellings', which came into force on 6 April 2014. The energy performance requirements of the 2013 edition have been strengthened to deliver a 6% carbon dioxide saving across the new homes build mix relative to the 2010 edition.		Dwelling Fabric Energy Efficiency rates (DFEE) and Target Fabric Energy Efficiency rates (TFEE) were introduced by the 2013 edition of approved document L1A of the building regulations, 'Conservation of fuel and power in new dwellings', which came into force on 6 April 2014. The energy performance requirements of the 2013 edition have been strengthened to deliver a 6% carbon dioxide saving across the new homes build mix relative to the 2010 edition.

Line 25:		Line 24:

	=== Related articles on Designing Buildings Wiki ===		=== Related articles on Designing Buildings Wiki ===
−	*2013 changes to the approved documents for part L of the building regulations.	+
−	*Approved document L.	+	* 2013 changes to the approved documents for part L of the building regulations.
−	*Approved documents.	+	* Approved document L.
−	*Building control body.	+	* Approved documents.
−	*Building Regulations.	+	* Building control body.
−	*Dwelling emission rate.	+	* Building Regulations.
−	*Limiting fabric parameters.	+	* Dwelling emission rate.
−	*Standard assessment procedure.	+	* Limiting fabric parameters.
−	*Target emission rate.	+	* Standard assessment procedure.
		+	* Target emission rate.

	=== External references ===		=== External references ===

	This article contains public sector information licensed under the [https://www.nationalarchives.gov.uk/doc/open-government-licence/version/2/ Open Government Licence v2.0] ref:		This article contains public sector information licensed under the [https://www.nationalarchives.gov.uk/doc/open-government-licence/version/2/ Open Government Licence v2.0] ref:
−	*[http://www.planningportal.gov.uk/uploads/br/BR_PDF_AD_L1A_2013.pdf Approved Document L1A, Conservation of fuel and power in new dwellings], 2013.
−	*DCLG circular [https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/262950/131130__AD_L_Circular_Letter___annex__web_Final.pdf New and amended Approved Documents and new Building Services Compliance Guides to support the energy efficiency requirements of the Building Regulations]. 3 December 2013.

−	[[Category:Regulations]]	+	* Approved Document L1A, Conservation of fuel and power in new dwellings, 2013.
−	[[Category:Sustainability]]	+	* DCLG circular [https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/262950/131130__AD_L_Circular_Letter___annex__web_Final.pdf New and amended Approved Documents and new Building Services Compliance Guides to support the energy efficiency requirements of the Building Regulations]. 3 December 2013.
		+
		+	[[Category:Regulations]] [[Category:DCN_Regulation]] [[Category:Sustainability]]

Designing Buildings at 12:02, 21 July 2014

2014-07-21T12:02:48Z

← Older revision		Revision as of 12:02, 21 July 2014
Line 31:		Line 31:
	*Building Regulations.		*Building Regulations.
	*Dwelling emission rate.		*Dwelling emission rate.
		+	*Limiting fabric parameters.
	*Standard assessment procedure.		*Standard assessment procedure.
	*Target emission rate.		*Target emission rate.

86.147.217.40 at 08:57, 21 July 2014

2014-07-21T08:57:26Z

← Older revision		Revision as of 08:57, 21 July 2014
Line 4:		Line 4:
	Dwelling Fabric Energy Efficiency rates and Target Fabric Energy Efficiency rates sit alongside the requirements for Target CO2 Emission Rates (TER) and Dwelling CO2 Emission Rates which were already part of the 2010 edition of the approved document.		Dwelling Fabric Energy Efficiency rates and Target Fabric Energy Efficiency rates sit alongside the requirements for Target CO2 Emission Rates (TER) and Dwelling CO2 Emission Rates which were already part of the 2010 edition of the approved document.

−	The Target Fabric Energy Efficiency rate is the minimum energy performance requirement for a new ~~Dwelling~~ approved by the Secretary of State in accordance with regulation 25 of the building regulations. It is expresses as the amount of energy demand in units of kilowatt-hours per square metre of floor area per year (kWh/(m^2.year).	+	The Target Fabric Energy Efficiency rate is the minimum energy performance requirement for a new dwelling approved by the Secretary of State in accordance with regulation 25 of the building regulations. It is expresses as the amount of energy demand in units of kilowatt-hours per square metre of floor area per year (kWh/(m^2.year).

	The TFEE is derived from a notional dwelling of the same size and shape as the actual dwelling being constructed. A summary of the Part L 2013 notional dwelling is published in Table 4 of approved document L1A and the full detail is set out in the Standard Assessment Procedure (SAP 2012) Appendix R. However, following responses to the consultation on the 2013 changes, a further 15% is permitted to allow some design flexibility.		The TFEE is derived from a notional dwelling of the same size and shape as the actual dwelling being constructed. A summary of the Part L 2013 notional dwelling is published in Table 4 of approved document L1A and the full detail is set out in the Standard Assessment Procedure (SAP 2012) Appendix R. However, following responses to the consultation on the 2013 changes, a further 15% is permitted to allow some design flexibility.

Designing Buildings at 08:17, 21 July 2014

2014-07-21T08:17:39Z

← Older revision		Revision as of 08:17, 21 July 2014
Line 24:		Line 24:
	= Find out more =		= Find out more =

−	=== Related ~~article~~ on Designing Buildings Wiki ===	+	=== Related articles on Designing Buildings Wiki ===
	*2013 changes to the approved documents for part L of the building regulations.		*2013 changes to the approved documents for part L of the building regulations.
	*Approved document L.		*Approved document L.

Designing Buildings at 08:15, 21 July 2014

2014-07-21T08:15:19Z

← Older revision		Revision as of 08:15, 21 July 2014
Line 1:		Line 1:

−		+	Dwelling Fabric Energy Efficiency rates (DFEE) and Target Fabric Energy Efficiency rates (TFEE) were introduced by the 2013 edition of approved document L1A of the building regulations, 'Conservation of fuel and power in new dwellings', which came into force on 6 April 2014. The energy performance requirements of the 2013 edition have been strengthened to deliver a 6% carbon dioxide saving across the new homes build mix relative to the 2010 edition.
−	Dwelling Fabric Energy Efficiency rates (DFEE) and Target Fabric Energy Efficiency rates (TFEE) were introduced by the 2013 edition of approved document L1A of the building regulations, Conservation of fuel and power in new dwellings, which came into force on 6 April 2014. The energy performance requirements of the 2013 edition have been strengthened to deliver a 6% carbon dioxide saving across the new homes build mix relative to ~~Part L~~ 2010.	+

	Dwelling Fabric Energy Efficiency rates and Target Fabric Energy Efficiency rates sit alongside the requirements for Target CO2 Emission Rates (TER) and Dwelling CO2 Emission Rates which were already part of the 2010 edition of the approved document.		Dwelling Fabric Energy Efficiency rates and Target Fabric Energy Efficiency rates sit alongside the requirements for Target CO2 Emission Rates (TER) and Dwelling CO2 Emission Rates which were already part of the 2010 edition of the approved document.

−	The Target Fabric Energy Efficiency rate is the minimum energy performance requirement for a new	+	The Target Fabric Energy Efficiency rate is the minimum energy performance requirement for a new Dwelling approved by the Secretary of State in accordance with regulation 25 of the building regulations. It is expresses as the amount of energy demand in units of kilowatt-hours per square metre of floor area per year (kWh/(m^2.year).
−		+
−	Dwelling approved by the Secretary of State in accordance with regulation 25 of the building regulations. It is expresses as the amount of energy demand in units of kilowatt-hours per square metre of floor area per year (kWh/(m^2.year).	+

−	The TFEE is derived from a notional dwelling of the same size and shape as the actual dwelling being constructed. A summary of the Part L 2013 notional dwelling is published in Table 4 of approved document L1A and the full detail is set out in the Standard Assessment Procedure SAP 2012 Appendix R. However, following responses to the consultation on the 2013 changes, a further 15% is permitted to allow some design flexibility.	+	The TFEE is derived from a notional dwelling of the same size and shape as the actual dwelling being constructed. A summary of the Part L 2013 notional dwelling is published in Table 4 of approved document L1A and the full detail is set out in the Standard Assessment Procedure (SAP 2012) Appendix R. However, following responses to the consultation on the 2013 changes, a further 15% is permitted to allow some design flexibility.

	The Dwelling Fabric Energy Efficiency rate is the actual energy performance of the new dwelling.		The Dwelling Fabric Energy Efficiency rate is the actual energy performance of the new dwelling.

−	In accordance with regulation 26A, of the building regulations, the calculated Dwelling Fabric Energy Efficiency rate must not be greater than the Target Fabric Energy Efficiency rate.	+	In accordance with regulation 26A of the building regulations, the calculated Dwelling Fabric Energy Efficiency rate must not be greater than the Target Fabric Energy Efficiency rate.

	If the actual dwelling is constructed entirely to the notional dwelling specifications it will meet the fabric energy efficiency targets, however, the notional dwelling is not prescriptive and developers are free to vary the specification, provided that TFEE rate is achieved or bettered.		If the actual dwelling is constructed entirely to the notional dwelling specifications it will meet the fabric energy efficiency targets, however, the notional dwelling is not prescriptive and developers are free to vary the specification, provided that TFEE rate is achieved or bettered.
Line 23:		Line 20:
	For a building that contains more than one dwelling (such as a terrace of houses or an apartment block), average rates can be used. An average cannot be calculated across separate multiple buildings on a site.		For a building that contains more than one dwelling (such as a terrace of houses or an apartment block), average rates can be used. An average cannot be calculated across separate multiple buildings on a site.

−	To guard against poor performance of individual elements, limiting fabric values are retained at Table 2 ~~in Approved Document~~ L1A and limiting building services efficiencies in the Domestic Building Services Compliance Guide.	+	To guard against poor performance of individual elements, limiting fabric values are retained in Table 2 of approved document L1A and limiting building services efficiencies are set out in the Domestic Building Services Compliance Guide.

	= Find out more =		= Find out more =

Designing Buildings: Created page with " Dwelling Fabric Energy Efficiency rates (DFEE) and Target Fabric Energy Efficiency rates (TFEE) were introduced by the 2013 edition of approved document L1A of the building reg..."

2014-07-21T08:11:09Z

Created page with " Dwelling Fabric Energy Efficiency rates (DFEE) and Target Fabric Energy Efficiency rates (TFEE) were introduced by the 2013 edition of approved document L1A of the building reg..."

New page

Dwelling Fabric Energy Efficiency rates (DFEE) and Target Fabric Energy Efficiency rates (TFEE) were introduced by the 2013 edition of approved document L1A of the building regulations, Conservation of fuel and power in new dwellings, which came into force on 6 April 2014. The energy performance requirements of the 2013 edition have been strengthened to deliver a 6% carbon dioxide saving across the new homes build mix relative to Part L 2010.

Dwelling Fabric Energy Efficiency rates and Target Fabric Energy Efficiency rates sit alongside the requirements for Target CO2 Emission Rates (TER) and Dwelling CO2 Emission Rates which were already part of the 2010 edition of the approved document.

The Target Fabric Energy Efficiency rate is the minimum energy performance requirement for a new

Dwelling approved by the Secretary of State in accordance with regulation 25 of the building regulations. It is expresses as the amount of energy demand in units of kilowatt-hours per square metre of floor area per year (kWh/(m^2.year).

The TFEE is derived from a notional dwelling of the same size and shape as the actual dwelling being constructed. A summary of the Part L 2013 notional dwelling is published in Table 4 of approved document L1A and the full detail is set out in the Standard Assessment Procedure SAP 2012 Appendix R. However, following responses to the consultation on the 2013 changes, a further 15% is permitted to allow some design flexibility.

The Dwelling Fabric Energy Efficiency rate is the actual energy performance of the new dwelling.

In accordance with regulation 26A, of the building regulations, the calculated Dwelling Fabric Energy Efficiency rate must not be greater than the Target Fabric Energy Efficiency rate.

If the actual dwelling is constructed entirely to the notional dwelling specifications it will meet the fabric energy efficiency targets, however, the notional dwelling is not prescriptive and developers are free to vary the specification, provided that TFEE rate is achieved or bettered.

Before work starts, the builder must calculate the DFEE rate of the dwelling as designed, to demonstrate it is not greater than the TFEE rate. The builder must give this design-based calculation to the Building Control Body (BCB) along with a list of specifications used.

When work is complete, the builder must notify the BCB of the DFEE rate and TFEE rate, and whether the building was constructed in accordance with the list of specifications submitted to the BCB before work started. A list of any changes to the design-stage list of specifications must be given to the BCB.

For a building that contains more than one dwelling (such as a terrace of houses or an apartment block), average rates can be used. An average cannot be calculated across separate multiple buildings on a site.

To guard against poor performance of individual elements, limiting fabric values are retained at Table 2 in Approved Document L1A and limiting building services efficiencies in the Domestic Building Services Compliance Guide.

= Find out more =

=== Related article on Designing Buildings Wiki ===
*2013 changes to the approved documents for part L of the building regulations.
*Approved document L.
*Approved documents.
*Building control body.
*Building Regulations.
*Dwelling emission rate.
*Standard assessment procedure.
*Target emission rate.

=== External references ===

This article contains public sector information licensed under the [https://www.nationalarchives.gov.uk/doc/open-government-licence/version/2/ Open Government Licence v2.0] ref:
*[http://www.planningportal.gov.uk/uploads/br/BR_PDF_AD_L1A_2013.pdf Approved Document L1A, Conservation of fuel and power in new dwellings], 2013.
*DCLG circular [https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/262950/131130__AD_L_Circular_Letter___annex__web_Final.pdf New and amended Approved Documents and new Building Services Compliance Guides to support the energy efficiency requirements of the Building Regulations]. 3 December 2013.

[[Category:Regulations]]
[[Category:Sustainability]]