Structural systems - Revision history

Designing Buildings at 07:09, 25 November 2020

2020-11-25T07:09:35Z

← Older revision		Revision as of 07:09, 25 November 2020
Line 77:		Line 77:
	* Types of structure.		* Types of structure.

−	[[Category:Theory]] [[Category:Construction_techniques]] [[Category:Design]]	+	[[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:Theory]] [[Category:Construction_techniques]] [[Category:Design]]

Designing Buildings at 09:33, 24 October 2019

2019-10-24T09:33:53Z

← Older revision		Revision as of 09:33, 24 October 2019
Line 33:		Line 33:
	For more information see: Tensile structures.		For more information see: Tensile structures.

−	=== Membrane structures ===	+	== Membrane structures ==

	Membrane structures (or fabric structures) create spaces that are enclosed by tensioned membranes. At its simplest, a tent may be regarded as a membrane structure given its steel or fibreglass poles support a canvas or plastic membrane covering.		Membrane structures (or fabric structures) create spaces that are enclosed by tensioned membranes. At its simplest, a tent may be regarded as a membrane structure given its steel or fibreglass poles support a canvas or plastic membrane covering.

Designing Buildings at 09:33, 24 October 2019

2019-10-24T09:33:29Z

← Older revision		Revision as of 09:33, 24 October 2019
Line 42:		Line 42:

	For more information see: Fabric structures.		For more information see: Fabric structures.
		+
		+	== Others ==
		+
		+	Other common forms of structural system include:
		+
		+	* Arches.
		+	* Barrel vaults.
		+	* Cantilevers.
		+	* Domes.
		+	* Shell and core.
		+	* Space frame.
		+	* Trussed rafters.
		+	* Portal frame.

	= Related articles on Designing Buildings Wiki =		= Related articles on Designing Buildings Wiki =

Designing Buildings at 09:30, 24 October 2019

2019-10-24T09:30:05Z

← Older revision		Revision as of 09:30, 24 October 2019
Line 16:		Line 16:

	The position of the structural frame relative to its cladding will determine the external appearance: cladding panels can be located behind, in front of, or flush with the frame.		The position of the structural frame relative to its cladding will determine the external appearance: cladding panels can be located behind, in front of, or flush with the frame.
		+
		+	== Shell structures ==
		+
		+	Shell structures are made from structural ‘skins’ where the shell material is thin in section relative to the other dimensions of the roof and undergoes relatively little deformation under load. They are commonly used where a building interior needs to be free from intermediate walls or columns that might support a more conventional flat or pitched roof, such as; libraries, theatres, leisure centres, airport and railway terminals, and so on.
		+
		+	Shell roofs structures be ‘flat’, but are typically curved, assuming a cylindrical, domed, paraboloid or ellipsoid shape. The curvature of shell structures benefits from the same structural efficiency as arches, which are pure compression forms with no tensile stresses. Because of their structural efficiency less material is generally needed compared to more traditional roofs. However, a restraining structure such as an edge beams is required to prevent the shell from ‘spreading’.
		+
		+	For more information see: Shell structure.

	== Tensile structures ==		== Tensile structures ==

Designing Buildings at 09:27, 24 October 2019

2019-10-24T09:27:41Z

← Older revision		Revision as of 09:27, 24 October 2019
Line 1:		Line 1:
	= Introduction =		= Introduction =

−	Structural systems are those elements of construction that are designed to form part of a building’s structure either to support the entire building or just a part of it. So, a steel frame is a structural system that supports the building and everything on it and in it. A space frame is a structural system that supports the roof.	+	Structural systems are those elements of construction that are designed to form part of a building’s structure either to support the entire building (or other built asset, such as a bridge or tunnel) or just a part of it. So, a steel frame is a structural system that supports the building and everything on it and in it. A space frame is a structural system that typically supports the roof.

	= Types of structural system =		= Types of structural system =
Line 11:		Line 11:
	=== Framed structures ===		=== Framed structures ===

−	Timber, reinforced concrete and steel can all be used to create regular frameworks comprising beams and columns. The beams transfer loads from roof, floors and walls to the columns. The columns transfer the beam loads to the sub-soil through the foundations. The dead and imposed loads from ~~roof panels~~ or slabs will be transferred to the floor beams and then to the structural frame. Compared to a continuous support-type of structure of similar weight, a framed structure typically transfers more concentrated loads into the subsoil.	+	Timber, reinforced concrete and steel can all be used to create regular frameworks comprising beams and columns. The beams transfer loads from roof, floors and walls to the columns. The columns transfer the beam loads to the sub-soil through the foundations. The dead and imposed loads from roofs or floor slabs will be transferred to the floor beams and then to the structural frame. Compared to a continuous support-type structure of similar weight, a framed structure typically transfers more concentrated loads into the subsoil.

−	External walls in framed buildings act as infill panels between columns and beams. Because they are non-load bearing (although they carry their own weight and must resist wind forces), they can be of any durable material that fulfils thermal, acoustic and environmental criteria. When positioned on the outside of the frame they form a part of the building envelope and are known as cladding. When they are positioned on a secondary steel framework attached to outside of the main structure so that a ventilation gap is created behind them, they are known as a rainscreen.	+	External walls in framed buildings act as infill panels between columns and beams. Because they are non-load bearing (although they carry their own weight and must resist wind forces), they can be of any durable material that fulfils thermal, acoustic, fire and environmental criteria. When positioned on the outside of the frame they form a part of the building envelope and are known as cladding. When they are positioned on a secondary steel framework attached to outside of the main structure so that a ventilation gap is created behind them, they are known as a rainscreen.

−	The position of the structural frame relative to its cladding will determine the external appearance: cladding panels can be located behind, in front or be flush with the frame.	+	The position of the structural frame relative to its cladding will determine the external appearance: cladding panels can be located behind, in front of, or flush with the frame.
		+
		+	== Tensile structures ==
		+
		+	Conventional structures tend to be stabilised by the action of gravity on their mass holding them in compression. A tensile structure is a structure that is stabilised by tension rather than compression. In practice, structures tend to carry both tension and compression, and it is the degree to which a structure is intentionally tensioned to stabilise it that determines whether it is considered a tensile structure.
		+
		+	A suspension bridge is an example of a tensile structure.
		+
		+	For more information see: Tensile structures.

	=== Membrane structures ===		=== Membrane structures ===

−	Membrane structures create spaces that are enclosed by tensioned membranes. At its simplest, a tent may be regarded as a membrane structure given its steel or fibreglass poles support a canvas or plastic membrane covering.	+	Membrane structures (or fabric structures) create spaces that are enclosed by tensioned membranes. At its simplest, a tent may be regarded as a membrane structure given its steel or fibreglass poles support a canvas or plastic membrane covering.
		+
		+	As structures, membranes can be divided into pneumatic structures, tensile membrane structures and cable net membrane structures. In all these, the membrane is rendered taut through tensile forces applied by steel cables (or internal air pressure) which transfer the forces to a structural frame and then to the subsoil. It is through the action of the cables and construction members that the membranes find their form.

−	As structures, ~~membranes can be divided into pneumatic structures, tensile membrane structures~~ and ~~cable domes. In all these, the membrane is rendered taut through tensile forces applied~~ by ~~steel cables~~ which ~~transfer the forces to structural columns and thence to the subsoil. It is through the action of the cables and construction members that the membranes find their form~~.	+	In inflatable structures, steel cables and columns are replaced by air which supports a reinforced membrane.

−	~~In inflatable~~ structures~~, steel cables and columns are replaced by air which supports a reinforced plastic or canvas membrane~~.	+	For more information see: Fabric structures.

	= Related articles on Designing Buildings Wiki =		= Related articles on Designing Buildings Wiki =

Editor: Created page with "= Introduction = Structural systems are those elements of construction that are designed to form part of a building’s structure either to support the entire building or just a..."

2019-09-30T19:37:20Z

Created page with "= Introduction = Structural systems are those elements of construction that are designed to form part of a building’s structure either to support the entire building or just a..."

New page

= Introduction =

Structural systems are those elements of construction that are designed to form part of a building’s structure either to support the entire building or just a part of it. So, a steel frame is a structural system that supports the building and everything on it and in it. A space frame is a structural system that supports the roof.

= Types of structural system =

=== Continuous structures ===

These comprise continuous supporting walls through which the combined loads and forces in a building are transferred, mainly by direct compression, into the subsoil through the foundations. The timber floors of a traditional brick-built house, for example, provide lateral bracing and prevent potential deflection of the walls. Laying the bricks in a bond pattern (ie with staggered vertical joints) allows compression forces to be evenly distributed throughout the wall volume.

=== Framed structures ===

Timber, reinforced concrete and steel can all be used to create regular frameworks comprising beams and columns. The beams transfer loads from roof, floors and walls to the columns. The columns transfer the beam loads to the sub-soil through the foundations. The dead and imposed loads from roof panels or slabs will be transferred to the floor beams and then to the structural frame. Compared to a continuous support-type of structure of similar weight, a framed structure typically transfers more concentrated loads into the subsoil.

External walls in framed buildings act as infill panels between columns and beams. Because they are non-load bearing (although they carry their own weight and must resist wind forces), they can be of any durable material that fulfils thermal, acoustic and environmental criteria. When positioned on the outside of the frame they form a part of the building envelope and are known as cladding. When they are positioned on a secondary steel framework attached to outside of the main structure so that a ventilation gap is created behind them, they are known as a rainscreen.

The position of the structural frame relative to its cladding will determine the external appearance: cladding panels can be located behind, in front or be flush with the frame.

=== Membrane structures ===

Membrane structures create spaces that are enclosed by tensioned membranes. At its simplest, a tent may be regarded as a membrane structure given its steel or fibreglass poles support a canvas or plastic membrane covering.

As structures, membranes can be divided into pneumatic structures, tensile membrane structures and cable domes. In all these, the membrane is rendered taut through tensile forces applied by steel cables which transfer the forces to structural columns and thence to the subsoil. It is through the action of the cables and construction members that the membranes find their form.

In inflatable structures, steel cables and columns are replaced by air which supports a reinforced plastic or canvas membrane.

= Related articles on Designing Buildings Wiki =

* BCIS elements.
* Braced frame.
* Building Cost Information Service
* Building fabric.
* Concept structural design.
* Concrete-steel composite structures.
* Curtain wall systems.
* Deflection.
* Fabric structures.
* Frei Otto.
* Hyperbolic paraboloid.
* Structural engineer.
* Structural principles.
* Structure definition.
* Substructure.
* Tensile structures.
* Tension cable and rod connectors.
* Types of structure.

[[Category:Theory]] [[Category:Construction_techniques]] [[Category:Design]]