Standard method and procedure SMP for BIM - Revision history

80.233.45.144 at 10:03, 25 August 2022

2022-08-25T10:03:03Z

← Older revision		Revision as of 10:03, 25 August 2022
Line 5:		Line 5:
	According to [[PAS_1192-2\|PAS 1192-2:2013: Specification for information management for the capital/delivery phase of construction projects using building information modelling]], (now replaced by BS EN ISO 19650) the term 'standard method and procedure' or SMP refers to a:		According to [[PAS_1192-2\|PAS 1192-2:2013: Specification for information management for the capital/delivery phase of construction projects using building information modelling]], (now replaced by BS EN ISO 19650) the term 'standard method and procedure' or SMP refers to a:

−	',,,set of standard methods and procedures covering the ~~way~~ information is named, expressed and referenced.'	+	',,,set of standard methods and procedures covering the process whereby information is named, expressed and referenced.'

	PAS 1192-2 suggests that SMP should be set out in the post-contract bim execution plan (BEP) (on large or complex projects this may be within a project implementation plan) prepared by suppliers and should define:		PAS 1192-2 suggests that SMP should be set out in the post-contract bim execution plan (BEP) (on large or complex projects this may be within a project implementation plan) prepared by suppliers and should define:
Line 34:		Line 34:
	* Volume strategy.		* Volume strategy.

−	[[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:DCN_Standard]] [[Category:~~BIM~~]] [[Category:~~Standards_/_measurements~~]]	+	[[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:DCN_Standard]] [[Category:Standards_/_measurements]] [[Category:BIM]]

Designing Buildings at 13:41, 6 October 2020

2020-10-06T13:41:24Z

← Older revision		Revision as of 13:41, 6 October 2020
Line 34:		Line 34:
	* Volume strategy.		* Volume strategy.

−	[[Category:~~BIM~~]] [[Category:~~Standards_/_measurements~~]] [[Category:DCN_Standard]]	+	[[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:DCN_Standard]] [[Category:BIM]] [[Category:Standards_/_measurements]]

Designing Buildings at 09:25, 29 May 2020

2020-05-29T09:25:29Z

← Older revision		Revision as of 09:25, 29 May 2020
Line 22:		Line 22:
	The common data environment (CDE) is the single source of information for the project, used to collect, manage and disseminate documentation, the graphical model and non-graphical data for the whole project team. Information should not be issued to the 'shared' area of the common data environment until compliance with the standard method and procedure has been checked. The information manager is a procedural gate-keeper, policing the common data environment to ensure that it follows the agreed protocol and that the data is secure.		The common data environment (CDE) is the single source of information for the project, used to collect, manage and disseminate documentation, the graphical model and non-graphical data for the whole project team. Information should not be issued to the 'shared' area of the common data environment until compliance with the standard method and procedure has been checked. The information manager is a procedural gate-keeper, policing the common data environment to ensure that it follows the agreed protocol and that the data is secure.

−	NB the BIMe Initiative sugges that: “Standard Methods and Procedures (SMP)s are set in the BIM Execution Plan, Project Implementation Plan or Employer’s Information Requirements. The SMP typically refers to all necessary conventions to be followed by the project team - including file naming, layer naming, construction tolerances, annotations, abbreviations and symbols.' Ref BIMe Initiative, “BIM Dictionary,” https://bimdictionary.com/~~terms~~/~~search~~.	+	NB the BIMe Initiative sugges that: “Standard Methods and Procedures (SMP)s are set in the BIM Execution Plan, Project Implementation Plan or Employer’s Information Requirements. The SMP typically refers to all necessary conventions to be followed by the project team - including file naming, layer naming, construction tolerances, annotations, abbreviations and symbols.' Ref BIMe Initiative, “BIM Dictionary,” [https://bimdictionary.com/ https://bimdictionary.com/]

	= Related articles on Designing Buildings Wiki =		= Related articles on Designing Buildings Wiki =
Line 34:		Line 34:
	* Volume strategy.		* Volume strategy.

−	[[Category:BIM]] [[Category:Standards_/_measurements]]	+	[[Category:BIM]] [[Category:Standards_/_measurements]] [[Category:DCN_Standard]]

Designing Buildings at 09:24, 29 May 2020

2020-05-29T09:24:53Z

← Older revision		Revision as of 09:24, 29 May 2020
Line 22:		Line 22:
	The common data environment (CDE) is the single source of information for the project, used to collect, manage and disseminate documentation, the graphical model and non-graphical data for the whole project team. Information should not be issued to the 'shared' area of the common data environment until compliance with the standard method and procedure has been checked. The information manager is a procedural gate-keeper, policing the common data environment to ensure that it follows the agreed protocol and that the data is secure.		The common data environment (CDE) is the single source of information for the project, used to collect, manage and disseminate documentation, the graphical model and non-graphical data for the whole project team. Information should not be issued to the 'shared' area of the common data environment until compliance with the standard method and procedure has been checked. The information manager is a procedural gate-keeper, policing the common data environment to ensure that it follows the agreed protocol and that the data is secure.

−	~~= Find out more =~~	+	NB the BIMe Initiative sugges that: “Standard Methods and Procedures (SMP)s are set in the BIM Execution Plan, Project Implementation Plan or Employer’s Information Requirements. The SMP typically refers to all necessary conventions to be followed by the project team - including file naming, layer naming, construction tolerances, annotations, abbreviations and symbols.' Ref BIMe Initiative, “BIM Dictionary,” https://bimdictionary.com/terms/search.

−	=== Related articles on Designing Buildings Wiki ===	+	= Related articles on Designing Buildings Wiki =

	* BIM execution plan.		* BIM execution plan.
Line 34:		Line 34:
	* Volume strategy.		* Volume strategy.

−	[[Category:~~Standards_/_measurements~~]] [[Category:~~BIM~~]]	+	[[Category:BIM]] [[Category:Standards_/_measurements]]

Designing Buildings at 07:43, 15 February 2019

2019-02-15T07:43:14Z

← Older revision		Revision as of 07:43, 15 February 2019
Line 3:		Line 3:
	A crucial part of the successful implementation of building information modelling is that project team members contributing or managing digital information adopt the same methods and procedures for its preparation, enabling it to be used and re-used without needing to be changed or interpreted.		A crucial part of the successful implementation of building information modelling is that project team members contributing or managing digital information adopt the same methods and procedures for its preparation, enabling it to be used and re-used without needing to be changed or interpreted.

−	According to [[PAS_1192-2\|PAS 1192-2:2013: Specification for information management for the capital/delivery phase of construction projects using building information modelling]], the term 'standard method and procedure' or SMP refers to a:	+	According to [[PAS_1192-2\|PAS 1192-2:2013: Specification for information management for the capital/delivery phase of construction projects using building information modelling]], (now replaced by BS EN ISO 19650) the term 'standard method and procedure' or SMP refers to a:

	',,,set of standard methods and procedures covering the way information is named, expressed and referenced.'		',,,set of standard methods and procedures covering the way information is named, expressed and referenced.'

Designing Buildings at 16:10, 8 July 2016

2016-07-08T16:10:51Z

← Older revision		Revision as of 16:10, 8 July 2016
Line 3:		Line 3:
	A crucial part of the successful implementation of building information modelling is that project team members contributing or managing digital information adopt the same methods and procedures for its preparation, enabling it to be used and re-used without needing to be changed or interpreted.		A crucial part of the successful implementation of building information modelling is that project team members contributing or managing digital information adopt the same methods and procedures for its preparation, enabling it to be used and re-used without needing to be changed or interpreted.

−	According to [[PAS_1192-2\|PAS 1192-2:2013: Specification for information management for the capital/delivery phase of construction projects using building information modelling]], the term ~~‘standard~~ method and ~~procedure’~~ or SMP refers to a:	+	According to [[PAS_1192-2\|PAS 1192-2:2013: Specification for information management for the capital/delivery phase of construction projects using building information modelling]], the term 'standard method and procedure' or SMP refers to a:

−	‘,,,set of standard methods and procedures covering the way information is named, expressed and referenced.’	+	',,,set of standard methods and procedures covering the way information is named, expressed and referenced.'

	PAS 1192-2 suggests that SMP should be set out in the post-contract bim execution plan (BEP) (on large or complex projects this may be within a project implementation plan) prepared by suppliers and should define:		PAS 1192-2 suggests that SMP should be set out in the post-contract bim execution plan (BEP) (on large or complex projects this may be within a project implementation plan) prepared by suppliers and should define:

	* The volume strategy.		* The volume strategy.
−	* PIM (project information model) origin and orientation (which may also be geo-referenced to the ~~earth’s~~ surface using a specified projection).	+	* PIM (project information model) origin and orientation (which may also be geo-referenced to the earth's surface using a specified projection).
	* File naming convention.		* File naming convention.
	* Layer naming convention, where used.		* Layer naming convention, where used.
Line 20:		Line 20:
	However, an experienced client, of one that may already use building information modelling may wish to set out their own SMP, at least in part, and this may be included in the Employer's Information Requirements.		However, an experienced client, of one that may already use building information modelling may wish to set out their own SMP, at least in part, and this may be included in the Employer's Information Requirements.

−	The common data environment (CDE) is the single source of information for the project, used to collect, manage and disseminate documentation, the graphical model and non-graphical data for the whole project team. Information should not be issued to the ~~‘shared’~~ area of the common data environment until compliance with the standard method and procedure has been checked. The information manager is a procedural gate-keeper, policing the common data environment to ensure that it follows the agreed protocol and that the data is secure.	+	The common data environment (CDE) is the single source of information for the project, used to collect, manage and disseminate documentation, the graphical model and non-graphical data for the whole project team. Information should not be issued to the 'shared' area of the common data environment until compliance with the standard method and procedure has been checked. The information manager is a procedural gate-keeper, policing the common data environment to ensure that it follows the agreed protocol and that the data is secure.

	= Find out more =		= Find out more =
Line 34:		Line 34:
	* Volume strategy.		* Volume strategy.

−	[[Category:Standards_/_measurements]]	+	[[Category:Standards_/_measurements]] [[Category:BIM]]

Designing Buildings at 09:00, 23 March 2016

2016-03-23T09:00:35Z

← Older revision		Revision as of 09:00, 23 March 2016
Line 1:		Line 1:
−	Building Information Modelling (BIM) is a very broad term that describes the process of creating a digital ~~model of~~ a building or other facility (such as a bridge, highway, tunnel and so on). A crucial part of the successful implementation of building information modelling is that the contributors to the model adopt the same methods and procedures for the preparation of information, enabling that information to be used and re-used without needing to be changed or interpreted.	+	Building Information Modelling (BIM) is a very broad term that describes the process of creating and managing digital information about a built asset such as a building or other facility such as a bridge, highway, tunnel and so on.

−	~~According to PAS 1192-2:2013: Specification for information management for~~ the ~~capital/delivery phase~~ of ~~construction projects using~~ building information modelling, the ~~term ‘standard method~~ and ~~procedure’ or SMP refers~~ to a:	+	A crucial part of the successful implementation of building information modelling is that project team members contributing or managing digital information adopt the same methods and procedures for its preparation, enabling it to be used and re-used without needing to be changed or interpreted.

−	~~‘set of standard methods and procedures covering~~ the ~~way~~ information ~~is named~~, ~~expressed~~ and ~~referenced.’~~	+	According to [[PAS_1192-2\|PAS 1192-2:2013: Specification for information management for the capital/delivery phase of construction projects using building information modelling]], the term ‘standard method and procedure’ or SMP refers to a:

−	~~According to~~ PAS 1192-2 ~~the~~ SMP should be set out in the post-contract bim execution plan (BEP) (on large or complex projects this may be within a project implementation plan) prepared by suppliers and should define:	+	‘,,,set of standard methods and procedures covering the way information is named, expressed and referenced.’
		+
		+	PAS 1192-2 suggests that SMP should be set out in the post-contract bim execution plan (BEP) (on large or complex projects this may be within a project implementation plan) prepared by suppliers and should define:

	* The volume strategy.		* The volume strategy.
Line 16:		Line 18:
	* Attribute data.		* Attribute data.

−	The common data environment (CDE) is the single source of information for the project, used to collect, manage and disseminate documentation, the graphical model and non-graphical data for the whole project team. Information should not be issued to the ‘shared’ area of the common data environment until compliance with the standard method and procedure has been checked.	+	However, an experienced client, of one that may already use building information modelling may wish to set out their own SMP, at least in part, and this may be included in the Employer's Information Requirements.
		+
		+	The common data environment (CDE) is the single source of information for the project, used to collect, manage and disseminate documentation, the graphical model and non-graphical data for the whole project team. Information should not be issued to the ‘shared’ area of the common data environment until compliance with the standard method and procedure has been checked. The information manager is a procedural gate-keeper, policing the common data environment to ensure that it follows the agreed protocol and that the data is secure.

	= Find out more =		= Find out more =

Designing Buildings at 15:38, 1 February 2016

2016-02-01T15:38:00Z

← Older revision		Revision as of 15:38, 1 February 2016
Line 1:		Line 1:
−
	Building Information Modelling (BIM) is a very broad term that describes the process of creating a digital model of a building or other facility (such as a bridge, highway, tunnel and so on). A crucial part of the successful implementation of building information modelling is that the contributors to the model adopt the same methods and procedures for the preparation of information, enabling that information to be used and re-used without needing to be changed or interpreted.		Building Information Modelling (BIM) is a very broad term that describes the process of creating a digital model of a building or other facility (such as a bridge, highway, tunnel and so on). A crucial part of the successful implementation of building information modelling is that the contributors to the model adopt the same methods and procedures for the preparation of information, enabling that information to be used and re-used without needing to be changed or interpreted.

Line 7:		Line 6:

	According to PAS 1192-2 the SMP should be set out in the post-contract bim execution plan (BEP) (on large or complex projects this may be within a project implementation plan) prepared by suppliers and should define:		According to PAS 1192-2 the SMP should be set out in the post-contract bim execution plan (BEP) (on large or complex projects this may be within a project implementation plan) prepared by suppliers and should define:
−	*The volume strategy.	+
−	*PIM (project information model) origin and orientation (which may also be geo-referenced to the earth’s surface using a specified projection).	+	* The volume strategy.
−	*File naming convention.	+	* PIM (project information model) origin and orientation (which may also be geo-referenced to the earth’s surface using a specified projection).
−	*Layer naming convention, where used.	+	* File naming convention.
−	*Agreed construction tolerances for all disciplines.	+	* Layer naming convention, where used.
−	*Drawing sheet templates.	+	* Agreed construction tolerances for all disciplines.
−	*Annotation, dimensions, abbreviations and symbols.	+	* Drawing sheet templates.
−	*Attribute data.	+	* Annotation, dimensions, abbreviations and symbols.
		+	* Attribute data.

	The common data environment (CDE) is the single source of information for the project, used to collect, manage and disseminate documentation, the graphical model and non-graphical data for the whole project team. Information should not be issued to the ‘shared’ area of the common data environment until compliance with the standard method and procedure has been checked.		The common data environment (CDE) is the single source of information for the project, used to collect, manage and disseminate documentation, the graphical model and non-graphical data for the whole project team. Information should not be issued to the ‘shared’ area of the common data environment until compliance with the standard method and procedure has been checked.
Line 21:		Line 21:

	=== Related articles on Designing Buildings Wiki ===		=== Related articles on Designing Buildings Wiki ===
−	*BIM execution plan.	+
−	*BIM.	+	* BIM execution plan.
−	*Common data environment.	+	* BIM.
−	*PAS 1192-2.	+	* Common data environment.
−	*Project implementation plan.	+	* Employer's information requirements.
−	*Volume strategy.	+	* PAS 1192-2.
		+	* Project implementation plan.
		+	* Volume strategy.

	[[Category:Standards_/_measurements]]		[[Category:Standards_/_measurements]]

Designing Buildings at 14:51, 22 January 2015

2015-01-22T14:51:53Z

← Older revision		Revision as of 14:51, 22 January 2015
Line 1:		Line 1:

−	Building Information Modelling (BIM) is a very broad term that describes the process of creating a digital model of a building or other facility (such as a bridge, highway, tunnel and so on). A crucial part of the successful implementation of building information modelling, is that the contributors to the model adopt the same methods and procedures for the preparation of information.	+	Building Information Modelling (BIM) is a very broad term that describes the process of creating a digital model of a building or other facility (such as a bridge, highway, tunnel and so on). A crucial part of the successful implementation of building information modelling is that the contributors to the model adopt the same methods and procedures for the preparation of information, enabling that information to be used and re-used without needing to be changed or interpreted.

	According to PAS 1192-2:2013: Specification for information management for the capital/delivery phase of construction projects using building information modelling, the term ‘standard method and procedure’ or SMP refers to a:		According to PAS 1192-2:2013: Specification for information management for the capital/delivery phase of construction projects using building information modelling, the term ‘standard method and procedure’ or SMP refers to a:

Designing Buildings at 10:37, 22 January 2015

2015-01-22T10:37:01Z

← Older revision		Revision as of 10:37, 22 January 2015
Line 16:		Line 16:
	*Attribute data.		*Attribute data.

−	The common data environment (CDE) is the single source of information for the project, used to collect, manage and disseminate documentation, the graphical model and non-graphical data for the whole project team. Information should not be issued to the ‘shared’ area of the common data environment until compliance with the standard ~~methods~~ and procedure has been checked.	+	The common data environment (CDE) is the single source of information for the project, used to collect, manage and disseminate documentation, the graphical model and non-graphical data for the whole project team. Information should not be issued to the ‘shared’ area of the common data environment until compliance with the standard method and procedure has been checked.

	= Find out more =		= Find out more =