Spatial coordination - Revision history

Editor: Reverted edits by 194.168.99.35 (talk) to last revision by Editor

2021-09-16T12:28:23Z

Reverted edits by 194.168.99.35 (talk) to last revision by Editor

← Older revision		Revision as of 12:28, 16 September 2021
Line 1:		Line 1:
−	~~= =~~	+	The process for completing the design and construction of a building is often divided into stages. This can be helpful in establishing milestones for the submission of progress reports, the preparation of information for approval, client gateways, and for making payments.

−	~~[[Category~~:~~Articles_needing_more_work]]~~ [[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:Design]]	+	However, there is a great deal of ambiguity between the naming of stages by different organisations and the definition of what individual stages actually include, and so it is important that appointment documents make it clear specifically what activities fall within which stage, and what level of detail is required.
		+
		+	‘Spatial coordination’ is a new stage introduced by the RIBA Plan of work 2020. This replaces ‘developed design’ in the 2013 edition and might previously have been known as ‘detailed design’.
		+
		+	The RIBA Plan of Work is published by the Royal Institute of British Architects (RIBA). Split into a number of key project stages, the RIBA Plan of Work provides a shared framework for design and construction that offers both a process map and a management tool.
		+
		+	The RIBA Plan of Work 2020 changed the structure of the stages as shown below:
		+
		+	{\|
		+	\| Stage
		+	\| 2013 edition
		+	\| 2020 edition
		+	\|-
		+	\| 0
		+	\| Strategic definition.
		+	\| Strategic definition.
		+	\|-
		+	\| 1
		+	\| Preparation and brief.
		+	\| Preparation and briefing.
		+	\|-
		+	\| 2
		+	\| Concept design.
		+	\| Concept design.
		+	\|-
		+	\| 3
		+	\| Developed design.
		+	\| Spatial coordination.
		+	\|-
		+	\| 4
		+	\| Technical design.
		+	\| Technical design.
		+	\|-
		+	\| 5
		+	\| Construction.
		+	\| Manufacturing and construction.
		+	\|-
		+	\| 6
		+	\| Handover and close out.
		+	\| Handover.
		+	\|-
		+	\| 7
		+	\| In use.
		+	\| Use.
		+	\|}
		+
		+	The 2020 edition of the RIBA Plan of Work suggests that the spatial coordination stage: ‘...is fundamentally about testing and validating the Architectural Concept, to make sure that the architectural and engineering information prepared at Stage 2 is Spatially Coordinated before the detailed information required to manufacture and construct the building is produced at Stage 4… Stage 3 is not about adjusting the Architectural Concept, which should remain substantially unaltered, although detailed design or engineering tasks may require adjustments to make sure that the building is Spatially Coordinated.’
		+
		+	It suggests that a spatially coordinated design is a: 'Design in which the client’s Spatial Requirements and the spaces required for any Building Systems – such as structural and building services engineering aspects, including grids, risers and plant rooms – have been determined and fixed to allow Stage 4 to progress without any further iterations.'
		+
		+	= Related articles on Designing Buildings Wiki =
		+
		+	* BREEAM and RIBA stages.
		+	* Comparison of BIM work stages.
		+	* Design.
		+	* Design studies.
		+	* Detailed design.
		+	* Developed design.
		+	* Engineering analysis.
		+	* Plan of work.
		+	* RIBA plan of work 2020.
		+	* RIBA.
		+	* Spatial requirements.
		+
		+	[[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:Design]]

194.168.99.35: Replaced content with "= = Category:Articles_needing_more_work Category:DCN_Definition Category:DCN_Guidance Category:Design "

2021-09-16T12:14:10Z

Replaced content with "= = Category:Articles_needing_more_work Category:DCN_Definition Category:DCN_Guidance Category:Design "

← Older revision		Revision as of 12:14, 16 September 2021
Line 1:		Line 1:
−	The process for completing the design and construction of a building is often divided into stages. This can be helpful in establishing milestones for the submission of progress reports, the preparation of information for approval, client gateways, and for making payments.	+	= =

−	However, there is a great deal of ambiguity between the naming of stages by different organisations and the definition of what individual stages actually include, and so it is important that appointment documents make it clear specifically what activities fall within which stage, and what level of detail is required.	+	[[Category:Articles_needing_more_work]] [[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:Design]]
−		+
−	‘Spatial coordination’ is a new stage introduced by the RIBA Plan of work 2020. This replaces ‘developed design’ in the 2013 edition and might previously have been known as ‘detailed design’.	+
−		+
−	The RIBA Plan of Work is published by the Royal Institute of British Architects (RIBA). Split into a number of key project stages, the RIBA Plan of Work provides a shared framework for design and construction that offers both a process map and a management tool.	+
−		+
−	~~The RIBA Plan of Work 2020 changed the structure of the stages as shown below~~:	+
−		+
−	{\|	+
−	~~\| Stage~~	+
−	~~\| 2013 edition~~	+
−	~~\| 2020 edition~~	+
−	\|-	+
−	~~\| 0~~	+
−	~~\| Strategic definition.~~	+
−	~~\| Strategic definition.~~	+
−	\|-	+
−	~~\| 1~~	+
−	~~\| Preparation and brief.~~	+
−	~~\| Preparation and briefing.~~	+
−	\|-	+
−	~~\| 2~~	+
−	~~\| Concept design.~~	+
−	~~\| Concept design.~~	+
−	\|-	+
−	~~\| 3~~	+
−	~~\| Developed design.~~	+
−	~~\| Spatial coordination.~~	+
−	\|-	+
−	~~\| 4~~	+
−	~~\| Technical design.~~	+
−	~~\| Technical design.~~	+
−	\|-	+
−	~~\| 5~~	+
−	~~\| Construction.~~	+
−	~~\| Manufacturing and construction.~~	+
−	\|-	+
−	~~\| 6~~	+
−	~~\| Handover and close out.~~	+
−	~~\| Handover.~~	+
−	\|-	+
−	~~\| 7~~	+
−	~~\| In use.~~	+
−	~~\| Use.~~	+
−	\|}	+
−		+
−	The 2020 edition of the RIBA Plan of Work suggests that the spatial coordination stage: ‘...is fundamentally about testing and validating the Architectural Concept, to make sure that the architectural and engineering information prepared at Stage 2 is Spatially Coordinated before the detailed information required to manufacture and construct the building is produced at Stage 4… Stage 3 is not about adjusting the Architectural Concept, which should remain substantially unaltered, although detailed design or engineering tasks may require adjustments to make sure that the building is Spatially Coordinated.’	+
−		+
−	It suggests that a spatially coordinated design is a: 'Design in which the client’s Spatial Requirements and the spaces required for any Building Systems – such as structural and building services engineering aspects, including grids, risers and plant rooms – have been determined and fixed to allow Stage 4 to progress without any further iterations.'	+
−		+
−	~~= Related articles on Designing Buildings Wiki =~~	+
−		+
−	* BREEAM and RIBA stages.	+
−	* Comparison of BIM work stages.	+
−	* Design.	+
−	* Design studies.	+
−	* Detailed design.	+
−	* Developed design.	+
−	* Engineering analysis.	+
−	* Plan of work.	+
−	* RIBA plan of work 2020.	+
−	* RIBA.	+
−	* Spatial requirements.	+
−		+
−	[[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:Design]]	+

Editor: Reverted edits by 194.168.99.35 (talk) to last revision by Designing Buildings

2021-09-16T11:03:52Z

Reverted edits by 194.168.99.35 (talk) to last revision by Designing Buildings

← Older revision		Revision as of 11:03, 16 September 2021
Line 1:		Line 1:
	The process for completing the design and construction of a building is often divided into stages. This can be helpful in establishing milestones for the submission of progress reports, the preparation of information for approval, client gateways, and for making payments.		The process for completing the design and construction of a building is often divided into stages. This can be helpful in establishing milestones for the submission of progress reports, the preparation of information for approval, client gateways, and for making payments.

−	~~whenever~~, there is a great deal of ambiguity between the naming of stages by different organisations and the definition of what individual stages actually include, and so it is important that appointment documents make it clear specifically what activities fall within which stage, and what level of detail is required.	+	However, there is a great deal of ambiguity between the naming of stages by different organisations and the definition of what individual stages actually include, and so it is important that appointment documents make it clear specifically what activities fall within which stage, and what level of detail is required.

	‘Spatial coordination’ is a new stage introduced by the RIBA Plan of work 2020. This replaces ‘developed design’ in the 2013 edition and might previously have been known as ‘detailed design’.		‘Spatial coordination’ is a new stage introduced by the RIBA Plan of work 2020. This replaces ‘developed design’ in the 2013 edition and might previously have been known as ‘detailed design’.
Line 14:		Line 14:
	\| 2020 edition		\| 2020 edition
	\|-		\|-
−	\| 7	+	\| 0
	\| Strategic definition.		\| Strategic definition.
	\| Strategic definition.		\| Strategic definition.
Line 42:		Line 42:
	\| Handover.		\| Handover.
	\|-		\|-
−	\| 0	+	\| 7
	\| In use.		\| In use.
	\| Use.		\| Use.
Line 49:		Line 49:
	The 2020 edition of the RIBA Plan of Work suggests that the spatial coordination stage: ‘...is fundamentally about testing and validating the Architectural Concept, to make sure that the architectural and engineering information prepared at Stage 2 is Spatially Coordinated before the detailed information required to manufacture and construct the building is produced at Stage 4… Stage 3 is not about adjusting the Architectural Concept, which should remain substantially unaltered, although detailed design or engineering tasks may require adjustments to make sure that the building is Spatially Coordinated.’		The 2020 edition of the RIBA Plan of Work suggests that the spatial coordination stage: ‘...is fundamentally about testing and validating the Architectural Concept, to make sure that the architectural and engineering information prepared at Stage 2 is Spatially Coordinated before the detailed information required to manufacture and construct the building is produced at Stage 4… Stage 3 is not about adjusting the Architectural Concept, which should remain substantially unaltered, although detailed design or engineering tasks may require adjustments to make sure that the building is Spatially Coordinated.’

−	It suggests that design is a: 'Design in which the client’s Spatial Requirements and the spaces required for any Building Systems – such as structural and building services engineering aspects, including grids, risers and plant rooms – have been determined and fixed to allow Stage 4 to progress without any further iterations.'	+	It suggests that a spatially coordinated design is a: 'Design in which the client’s Spatial Requirements and the spaces required for any Building Systems – such as structural and building services engineering aspects, including grids, risers and plant rooms – have been determined and fixed to allow Stage 4 to progress without any further iterations.'

	= Related articles on Designing Buildings Wiki =		= Related articles on Designing Buildings Wiki =
Line 65:		Line 65:
	* Spatial requirements.		* Spatial requirements.

−	~~[[Category:Articles_needing_more_work]]~~ [[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:Design]]	+	[[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:Design]]

194.168.99.35 at 10:50, 16 September 2021

2021-09-16T10:50:56Z

← Older revision		Revision as of 10:50, 16 September 2021
Line 14:		Line 14:
	\| 2020 edition		\| 2020 edition
	\|-		\|-
−	\| 0	+	\| 7
	\| Strategic definition.		\| Strategic definition.
	\| Strategic definition.		\| Strategic definition.
Line 42:		Line 42:
	\| Handover.		\| Handover.
	\|-		\|-
−	\| 7	+	\| 0
	\| In use.		\| In use.
	\| Use.		\| Use.

194.168.99.35 at 10:48, 16 September 2021

2021-09-16T10:48:56Z

← Older revision		Revision as of 10:48, 16 September 2021
Line 1:		Line 1:
	The process for completing the design and construction of a building is often divided into stages. This can be helpful in establishing milestones for the submission of progress reports, the preparation of information for approval, client gateways, and for making payments.		The process for completing the design and construction of a building is often divided into stages. This can be helpful in establishing milestones for the submission of progress reports, the preparation of information for approval, client gateways, and for making payments.

−	~~However~~, there is a great deal of ambiguity between the naming of stages by different organisations and the definition of what individual stages actually include, and so it is important that appointment documents make it clear specifically what activities fall within which stage, and what level of detail is required.	+	whenever, there is a great deal of ambiguity between the naming of stages by different organisations and the definition of what individual stages actually include, and so it is important that appointment documents make it clear specifically what activities fall within which stage, and what level of detail is required.

	‘Spatial coordination’ is a new stage introduced by the RIBA Plan of work 2020. This replaces ‘developed design’ in the 2013 edition and might previously have been known as ‘detailed design’.		‘Spatial coordination’ is a new stage introduced by the RIBA Plan of work 2020. This replaces ‘developed design’ in the 2013 edition and might previously have been known as ‘detailed design’.
Line 49:		Line 49:
	The 2020 edition of the RIBA Plan of Work suggests that the spatial coordination stage: ‘...is fundamentally about testing and validating the Architectural Concept, to make sure that the architectural and engineering information prepared at Stage 2 is Spatially Coordinated before the detailed information required to manufacture and construct the building is produced at Stage 4… Stage 3 is not about adjusting the Architectural Concept, which should remain substantially unaltered, although detailed design or engineering tasks may require adjustments to make sure that the building is Spatially Coordinated.’		The 2020 edition of the RIBA Plan of Work suggests that the spatial coordination stage: ‘...is fundamentally about testing and validating the Architectural Concept, to make sure that the architectural and engineering information prepared at Stage 2 is Spatially Coordinated before the detailed information required to manufacture and construct the building is produced at Stage 4… Stage 3 is not about adjusting the Architectural Concept, which should remain substantially unaltered, although detailed design or engineering tasks may require adjustments to make sure that the building is Spatially Coordinated.’

−	It suggests that ~~a spatially coordinated~~ design is a: 'Design in which the client’s Spatial Requirements and the spaces required for any Building Systems – such as structural and building services engineering aspects, including grids, risers and plant rooms – have been determined and fixed to allow Stage 4 to progress without any further iterations.'	+	It suggests that design is a: 'Design in which the client’s Spatial Requirements and the spaces required for any Building Systems – such as structural and building services engineering aspects, including grids, risers and plant rooms – have been determined and fixed to allow Stage 4 to progress without any further iterations.'

	= Related articles on Designing Buildings Wiki =		= Related articles on Designing Buildings Wiki =
Line 65:		Line 65:
	* Spatial requirements.		* Spatial requirements.

−	[[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:Design]]	+	[[Category:Articles_needing_more_work]] [[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:Design]]

Designing Buildings at 06:49, 26 November 2020

2020-11-26T06:49:49Z

← Older revision		Revision as of 06:49, 26 November 2020
Line 65:		Line 65:
	* Spatial requirements.		* Spatial requirements.

−	[[Category:Design]]	+	[[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:Design]]

Designing Buildings at 08:39, 19 March 2020

2020-03-19T08:39:56Z

← Older revision		Revision as of 08:39, 19 March 2020
Line 48:		Line 48:

	The 2020 edition of the RIBA Plan of Work suggests that the spatial coordination stage: ‘...is fundamentally about testing and validating the Architectural Concept, to make sure that the architectural and engineering information prepared at Stage 2 is Spatially Coordinated before the detailed information required to manufacture and construct the building is produced at Stage 4… Stage 3 is not about adjusting the Architectural Concept, which should remain substantially unaltered, although detailed design or engineering tasks may require adjustments to make sure that the building is Spatially Coordinated.’		The 2020 edition of the RIBA Plan of Work suggests that the spatial coordination stage: ‘...is fundamentally about testing and validating the Architectural Concept, to make sure that the architectural and engineering information prepared at Stage 2 is Spatially Coordinated before the detailed information required to manufacture and construct the building is produced at Stage 4… Stage 3 is not about adjusting the Architectural Concept, which should remain substantially unaltered, although detailed design or engineering tasks may require adjustments to make sure that the building is Spatially Coordinated.’
		+
		+	It suggests that a spatially coordinated design is a: 'Design in which the client’s Spatial Requirements and the spaces required for any Building Systems – such as structural and building services engineering aspects, including grids, risers and plant rooms – have been determined and fixed to allow Stage 4 to progress without any further iterations.'

	= Related articles on Designing Buildings Wiki =		= Related articles on Designing Buildings Wiki =

Designing Buildings at 08:36, 19 March 2020

2020-03-19T08:36:31Z

← Older revision		Revision as of 08:36, 19 March 2020
Line 61:		Line 61:
	* RIBA plan of work 2020.		* RIBA plan of work 2020.
	* RIBA.		* RIBA.
		+	* Spatial requirements.

	[[Category:Design]]		[[Category:Design]]

Designing Buildings at 11:46, 9 March 2020

2020-03-09T11:46:03Z

← Older revision		Revision as of 11:46, 9 March 2020
Line 57:		Line 57:
	* Detailed design.		* Detailed design.
	* Developed design.		* Developed design.
−	* ~~Governance for Railway Investment Projects (GRIP).~~	+	* Engineering analysis.
−	* NBS.	+
−	* OGC gateway review.	+
	* Plan of work.		* Plan of work.
−	* Project lifecycle for major road projects.
−	* RIBA Plan of Work for Fire Safety.
−	* RIBA plan of work v project plans v OGC gateways.
−	* RIBA plan of work.
	* RIBA plan of work 2020.		* RIBA plan of work 2020.
	* RIBA.		* RIBA.

	[[Category:Design]]		[[Category:Design]]

Designing Buildings at 11:32, 9 March 2020

2020-03-09T11:32:05Z

← Older revision		Revision as of 11:32, 9 March 2020
Line 53:		Line 53:
	* BREEAM and RIBA stages.		* BREEAM and RIBA stages.
	* Comparison of BIM work stages.		* Comparison of BIM work stages.
		+	* Design.
		+	* Design studies.
		+	* Detailed design.
		+	* Developed design.
	* Governance for Railway Investment Projects (GRIP).		* Governance for Railway Investment Projects (GRIP).
	* NBS.		* NBS.
Line 58:		Line 62:
	* Plan of work.		* Plan of work.
	* Project lifecycle for major road projects.		* Project lifecycle for major road projects.
−	* Record keeping.
	* RIBA Plan of Work for Fire Safety.		* RIBA Plan of Work for Fire Safety.
	* RIBA plan of work v project plans v OGC gateways.		* RIBA plan of work v project plans v OGC gateways.