Designing Buildings at 11:25, 29 March 2023

2023-03-29T11:25:10Z

← Older revision		Revision as of 11:25, 29 March 2023
Line 1:		Line 1:
−	A slate tile vent, plain tile vent or non-profile tile vent ~~are~~ suitable for flat profile slate or tile roofs. The vent itself is often a moulded plastic product, but can also be made of clay~~, it~~ is designed to allow air to pass through without letting rain water in. ~~These vents~~ normally have small vents holes within the tile or slate profile and a secondary layer to allow water run off. Other more generic universal types of roof tile vents have a raised section or cover with ventilation beneath~~, these~~ fit various styles of roof tile ~~including~~ slates.	+	A slate tile vent, plain tile vent or non-profile tile vent is suitable for flat profile slate or tile roofs. The vent itself is often a moulded plastic product, but can also be made of clay. It is designed to allow air to pass through the roof covering without letting rain water in. They normally have small vents holes within the tile or slate profile and a secondary layer to allow water run off. Other more generic universal types of roof tile vents have a raised section or cover with ventilation beneath. These fit various styles of roof tile and slates.

−	In most cases the underside of the venting tile will have a downstand and a lip, to allow to ~~penotrate~~ the roofing layer beneath the battons above the rafters, (~~breater~~ membrane, felt or waterproofing), to ~~achieve~~ ventilation, whilst sealing the ~~joint~~. In some cases it may be fitted with extra attachments to allow ventilation ducts such as from a bathroom extract to be connected ~~directly~~.	+	In most cases the underside of the venting tile will have a downstand and a lip, to allow it to penetrate the roofing layer beneath the battons above the rafters, (and breahter membrane, felt or waterproofing), to provide ventilation whilst sealing the roof. In some cases it may be fitted with extra attachments to allow ventilation ducts such as from a bathroom extract to be connected.

−	In a cold roof ~~scenario~~, the insulation and air tightness barrier is normally in line with the ceiling of the upper most rooms, rather than the pitch of the roof itself. Keeping the uninsulated roof space ventilated can be important to prevent moisture build-up, mould and potential damage to timber rafters, particularly where non breathable felt or bitumen products are used. Increased moisture from warm air and activity in living spaces below can build up in the cold roof space above, condense on surfaces and ~~with out~~ good air flow can cause structural damage over longer periods.	+	In a cold roof, the insulation and air tightness barrier is normally in line with the ceiling of the upper most rooms, rather than the pitch of the roof itself. Keeping the uninsulated roof space ventilated can be important to prevent moisture build-up, mould and potential damage to timber rafters, particularly where non breathable felt or bitumen products are used. Increased moisture from warm air and activity in living spaces below can build up in the cold roof space above, condense on surfaces and without good air flow can cause structural damage over longer periods.

−	Roof tile vents are one way of introducing air flow into a cold roofs to remove moisture build up~~, other~~ options ~~are~~ felt lap, slate, soffit, fascia and ridge vents. In some cases where levels of insulation are increased above the ceiling level this can restrict air flow that traditionally would have come through the sofits or barge board ventilators. Roof tile vents can be installed higher up the roofpitch, thus not being restricted by the increased levels of insulation.	+	Roof tile vents are one way of introducing air flow into a cold roofs to remove moisture build up. Other options include felt lap, slate, soffit, fascia and ridge vents. In some cases where levels of insulation are increased above the ceiling level this can restrict air flow that traditionally would have come through the sofits or barge board ventilators. Roof tile vents can be installed higher up the roofpitch, thus not being restricted by the increased levels of insulation.

	For further information on the ventilation of cold roofs guidance should be sought in [https://www.gov.uk/government/publications/site-preparation-and-resistance-to-contaminates-and-moisture-approved-document-c Aproved Document C "Site preparation and resistance to contaminants and moisture"] section C2.		For further information on the ventilation of cold roofs guidance should be sought in [https://www.gov.uk/government/publications/site-preparation-and-resistance-to-contaminates-and-moisture-approved-document-c Aproved Document C "Site preparation and resistance to contaminants and moisture"] section C2.

Editor: Created page with "A slate tile vent, plain tile vent or non-profile tile vent are suitable for flat profile slate or tile roofs. The vent itself is often a moulded plastic product, but can also be..."

2023-02-07T20:43:58Z

Created page with "A slate tile vent, plain tile vent or non-profile tile vent are suitable for flat profile slate or tile roofs. The vent itself is often a moulded plastic product, but can also be..."

New page

A slate tile vent, plain tile vent or non-profile tile vent are suitable for flat profile slate or tile roofs. The vent itself is often a moulded plastic product, but can also be made of clay, it is designed to allow air to pass through without letting rain water in. These vents normally have small vents holes within the tile or slate profile and a secondary layer to allow water run off. Other more generic universal types of roof tile vents have a raised section or cover with ventilation beneath, these fit various styles of roof tile including slates.

In most cases the underside of the venting tile will have a downstand and a lip, to allow to penotrate the roofing layer beneath the battons above the rafters, (breater membrane, felt or waterproofing), to achieve ventilation, whilst sealing the joint. In some cases it may be fitted with extra attachments to allow ventilation ducts such as from a bathroom extract to be connected directly.

In a cold roof scenario, the insulation and air tightness barrier is normally in line with the ceiling of the upper most rooms, rather than the pitch of the roof itself. Keeping the uninsulated roof space ventilated can be important to prevent moisture build-up, mould and potential damage to timber rafters, particularly where non breathable felt or bitumen products are used. Increased moisture from warm air and activity in living spaces below can build up in the cold roof space above, condense on surfaces and with out good air flow can cause structural damage over longer periods.

Roof tile vents are one way of introducing air flow into a cold roofs to remove moisture build up, other options are felt lap, slate, soffit, fascia and ridge vents. In some cases where levels of insulation are increased above the ceiling level this can restrict air flow that traditionally would have come through the sofits or barge board ventilators. Roof tile vents can be installed higher up the roofpitch, thus not being restricted by the increased levels of insulation.

For further information on the ventilation of cold roofs guidance should be sought in [https://www.gov.uk/government/publications/site-preparation-and-resistance-to-contaminates-and-moisture-approved-document-c Aproved Document C "Site preparation and resistance to contaminants and moisture"] section C2.

= Related articles on Designing Buildings =

* Cold roof.
* Condensation in buildings.
* Cross ventilation.
* Domestic roofs.
* Flat roof defects.
* Interstitial condensation.
* Inverted roof.
* Natural ventilation of buildings.
* Roofing defects.
* Thermal bridging in buildings.
* Thermal comfort.
* Trickle ventilation in buildings.
* Warm roof.

[[Category:DCN_Commentary]] [[Category:DCN_Product_Knowledge]] [[Category:Water]] [[Category:Standards_/_measurements]] [[Category:Products_/_components]]

Slate tile vent - Revision history

Designing Buildings at 11:25, 29 March 2023

Editor: Created page with "A slate tile vent, plain tile vent or non-profile tile vent are suitable for flat profile slate or tile roofs. The vent itself is often a moulded plastic product, but can also be..."