Pulley - Revision history

Designing Buildings at 05:44, 7 July 2021

2021-07-07T05:44:01Z

← Older revision		Revision as of 05:44, 7 July 2021
Line 8:		Line 8:
	= Introduction =		= Introduction =

−	A pulley is a type of wheel ~~that~~ is used with an axle to support the movement of some type of load.	+	A pulley is a type of wheel system is used with an axle to support the movement of some type of load.

	= History =		= History =
Line 26:		Line 26:
	= Types of pulleys =		= Types of pulleys =

−	There are several ~~different~~ types of ~~pulleys. These include~~:	+	There are several types of pulley:

	* Fixed. A fixed pulley has an axle mounted in bearings attached to a supporting structure.		* Fixed. A fixed pulley has an axle mounted in bearings attached to a supporting structure.
−	* Movable. A movable pulley is made up of an axle in a movable block. A single movable pulley can ~~accomplish~~ more than a single fixed pulley.	+	* Movable. A movable pulley is made up of an axle in a movable block. A single movable pulley can lift more than a single fixed pulley.
−	* Compound. This combination of fixed and movable pulleys is also known as rope and pulley or block and tackle. When a fixed pulley is combined with a movable pulley or another fixed pulley, it can ~~accomplish~~ more ambitious mechanical goals.	+	* Compound. This combination of fixed and movable pulleys is also known as rope and pulley or block and tackle. When a fixed pulley is combined with a movable pulley or another fixed pulley, it can achieve more ambitious mechanical goals.

	== Rope and pulley ==		== Rope and pulley ==

−	When used in combination with a frame or shell (sometimes referred to as a block), the freely rotating movable pulley (or set of pulleys) may be referred to as a sheave. The pulley or sheave may have indentations or grooves around its circumference to accommodate a drive element (sometimes referred to as a tackle) in the form of a continuous cable, belt, rope or chain ~~made from rubber, leather, fabric, metal and so on~~. The tackle transmits tension to move ~~the item or~~ load.	+	When used in combination with a frame or shell (sometimes referred to as a block), the freely rotating movable pulley (or set of pulleys) may be referred to as a sheave. The pulley or sheave may have indentations or grooves around its circumference to accommodate a drive element (sometimes referred to as a tackle) in the form of a continuous cable, belt, rope or chain. The tackle transmits tension to move a load.

−	This combination of rope and pulley ~~(also referred to as block and tackle)~~ can be part of a simple system that is used to lift items or change the direction of their motion. With the aid of a block and tackle system, it is possible to lift heavy loads by the application of a relatively small amount of force.	+	This combination of rope and pulley can be part of a simple system that is used to lift items or change the direction of their motion. With the aid of a block and tackle system, it is possible to lift heavy loads by the application of a relatively small amount of force.

−	There are different types of rope and pulley configurations. The variations are based on ~~methods of~~ tackle configuration. Increasing the number of pulleys and falls of tackle increases the ~~amount of~~ load that can be moved ~~or lifted~~. Pulleys can be incorporated into common items such as curtains and sliding doors or lifting equipment such as fire ladders or power–driven industrial trucks.	+	There are different types of rope and pulley configurations. The variations are based on the tackle configuration. Increasing the number of pulleys and falls of tackle increases the load that can be moved. Pulleys can be incorporated into common items such as curtains and sliding doors or lifting equipment such as fire ladders or power–driven industrial trucks and so on.

	=== LOLER and rope and pulley systems ===		=== LOLER and rope and pulley systems ===
Line 64:		Line 64:
	== Belt and pulley ==		== Belt and pulley ==

−	Another ~~usage~~ of the pulley is the belt and pulley system. This system uses a pulley in conjunction with a belt drive to direct power from one place to another. The belt and pulley system can also control the speed of the motion.	+	Another use of the pulley is the belt and pulley system. This system uses a pulley in conjunction with a belt drive to direct power from one place to another. The belt and pulley system can also control the speed of the motion.

	{\|		{\|

Editor at 18:39, 6 July 2021

2021-07-06T18:39:35Z

← Older revision		Revision as of 18:39, 6 July 2021
Line 80:		Line 80:
	* Lifting Operations and Lifting Equipment Regulations (LOLER).		* Lifting Operations and Lifting Equipment Regulations (LOLER).
	* Lifts for buildings.		* Lifts for buildings.
−	* Stairlift.
	* The Science of Lifts.		* The Science of Lifts.
	* Types of crane.		* Types of crane.

	[[Category:DCN_Definition]] [[Category:Definitions]] [[Category:Health_and_safety_/_CDM]] [[Category:Construction_techniques]] [[Category:Products_/_components]]		[[Category:DCN_Definition]] [[Category:Definitions]] [[Category:Health_and_safety_/_CDM]] [[Category:Construction_techniques]] [[Category:Products_/_components]]

Editor at 18:37, 6 July 2021

2021-07-06T18:37:44Z

← Older revision		Revision as of 18:37, 6 July 2021
Line 77:		Line 77:
	= Related articles on Designing Buildings Wiki =		= Related articles on Designing Buildings Wiki =

		+	* Lifting device.
	* Lifting Operations and Lifting Equipment Regulations (LOLER).		* Lifting Operations and Lifting Equipment Regulations (LOLER).
	* Lifts for buildings.		* Lifts for buildings.

Editor at 18:36, 6 July 2021

2021-07-06T18:36:06Z

← Older revision		Revision as of 18:36, 6 July 2021
Line 14:		Line 14:
	The earliest recorded existence of pulley systems appeared in Ancient Egypt, Mesopotamia and Greece where block and tackle configurations were commonly used to move heavy objects.		The earliest recorded existence of pulley systems appeared in Ancient Egypt, Mesopotamia and Greece where block and tackle configurations were commonly used to move heavy objects.

−	During the Renaissance, this system was included by scientists in their list of six simple machines~~, which served as the basis for more complex machines that came after~~.	+	During the Renaissance, this system was included by scientists in their list of six simple machines. According to Galileo Galilei, the simple machines “do not create energy, only transform it.” In addition to the pulley, these machines included:
−		+
−	According to Galileo Galilei, the simple machines “do not create energy, only transform it.” In addition to the pulley, these machines included:	+

	* Lever		* Lever
Line 23:		Line 21:
	* Wedge		* Wedge
	* Screw		* Screw
		+
		+	The six simple machines often served as the basis for more complex machines.

	= Types of pulleys =		= Types of pulleys =
Line 28:		Line 28:
	There are several different types of pulleys. These include:		There are several different types of pulleys. These include:

−	* Fixed: A fixed pulley has an axle mounted in bearings attached to a supporting structure. A fixed pulley changes the direction of the force on a rope or belt that moves along its circumference. Mechanical advantage is gained by combining a fixed pulley with a movable pulley or another fixed pulley of a different diameter.	+	* Fixed. A fixed pulley has an axle mounted in bearings attached to a supporting structure.
−	* Movable: A movable pulley ~~has~~ an axle in a movable block. A single movable pulley ~~is supported by two parts of the same rope and has~~ a ~~mechanical advantage of two~~.	+	* Movable. A movable pulley is made up of an axle in a movable block. A single movable pulley can accomplish more than a single fixed pulley.
−	* Compound~~: A~~ combination of fixed and movable pulleys ~~forms a~~ block and tackle. ~~A block and tackle can have several pulleys mounted on the~~ fixed ~~and moving axles~~, ~~further increasing the~~ mechanical ~~advantage~~.	+	* Compound. This combination of fixed and movable pulleys is also known as rope and pulley or block and tackle. When a fixed pulley is combined with a movable pulley or another fixed pulley, it can accomplish more ambitious mechanical goals.

	== Rope and pulley ==		== Rope and pulley ==
Line 68:		Line 68:
	{\|		{\|
	\|width="100%"\|		\|width="100%"\|
−	[[File:Pulley.Belt.jpg]]	+	[[File:Pulley.Belt.jpg\|link=File:Pulley.Belt.jpg]]

	This photograph shows a belt and pulley system.		This photograph shows a belt and pulley system.

Editor at 17:13, 6 July 2021

2021-07-06T17:13:40Z

← Older revision		Revision as of 17:13, 6 July 2021
Line 1:		Line 1:
−	[[File:Pulley.BandT.jpg]]	+	{\|
		+	\|width="100%"\|
		+	[[File:Pulley.BandT.jpg\|link=File:Pulley.BandT.jpg]]
		+
		+	This photograph shows a rope and pulley (or block and tackle) system.
		+	\|}

	= Introduction =		= Introduction =
Line 60:		Line 65:

	Another usage of the pulley is the belt and pulley system. This system uses a pulley in conjunction with a belt drive to direct power from one place to another. The belt and pulley system can also control the speed of the motion.		Another usage of the pulley is the belt and pulley system. This system uses a pulley in conjunction with a belt drive to direct power from one place to another. The belt and pulley system can also control the speed of the motion.
		+
		+	{\|
		+	\|width="100%"\|
		+	[[File:Pulley.Belt.jpg]]
		+
		+	This photograph shows a belt and pulley system.
		+	\|}

	This configuration consists of two or more pulleys used in conjunction with a belt. The necessary contact pressure between the belt and pulleys is ensured by appropriate tightening of the belt. This may be achieved by means of a tensioning roller or another pulley.		This configuration consists of two or more pulleys used in conjunction with a belt. The necessary contact pressure between the belt and pulleys is ensured by appropriate tightening of the belt. This may be achieved by means of a tensioning roller or another pulley.
Line 70:		Line 82:
	* The Science of Lifts.		* The Science of Lifts.
	* Types of crane.		* Types of crane.
		+
		+	[[Category:DCN_Definition]] [[Category:Definitions]] [[Category:Health_and_safety_/_CDM]] [[Category:Construction_techniques]] [[Category:Products_/_components]]

Editor: Created page with "File:Pulley.BandT.jpg = Introduction = A pulley is a type of wheel that is used with an axle to support the movement of some type of load. = History = The earliest record..."

2021-07-06T17:07:41Z

Created page with "File:Pulley.BandT.jpg = Introduction = A pulley is a type of wheel that is used with an axle to support the movement of some type of load. = History = The earliest record..."

New page

[[File:Pulley.BandT.jpg]]

= Introduction =

A pulley is a type of wheel that is used with an axle to support the movement of some type of load.

= History =

The earliest recorded existence of pulley systems appeared in Ancient Egypt, Mesopotamia and Greece where block and tackle configurations were commonly used to move heavy objects.

During the Renaissance, this system was included by scientists in their list of six simple machines, which served as the basis for more complex machines that came after.

According to Galileo Galilei, the simple machines “do not create energy, only transform it.” In addition to the pulley, these machines included:

* Lever
* Wheel and axle
* Inclined plane
* Wedge
* Screw

= Types of pulleys =

There are several different types of pulleys. These include:

* Fixed: A fixed pulley has an axle mounted in bearings attached to a supporting structure. A fixed pulley changes the direction of the force on a rope or belt that moves along its circumference. Mechanical advantage is gained by combining a fixed pulley with a movable pulley or another fixed pulley of a different diameter.
* Movable: A movable pulley has an axle in a movable block. A single movable pulley is supported by two parts of the same rope and has a mechanical advantage of two.
* Compound: A combination of fixed and movable pulleys forms a block and tackle. A block and tackle can have several pulleys mounted on the fixed and moving axles, further increasing the mechanical advantage.

== Rope and pulley ==

When used in combination with a frame or shell (sometimes referred to as a block), the freely rotating movable pulley (or set of pulleys) may be referred to as a sheave. The pulley or sheave may have indentations or grooves around its circumference to accommodate a drive element (sometimes referred to as a tackle) in the form of a continuous cable, belt, rope or chain made from rubber, leather, fabric, metal and so on. The tackle transmits tension to move the item or load.

This combination of rope and pulley (also referred to as block and tackle) can be part of a simple system that is used to lift items or change the direction of their motion. With the aid of a block and tackle system, it is possible to lift heavy loads by the application of a relatively small amount of force.

There are different types of rope and pulley configurations. The variations are based on methods of tackle configuration. Increasing the number of pulleys and falls of tackle increases the amount of load that can be moved or lifted. Pulleys can be incorporated into common items such as curtains and sliding doors or lifting equipment such as fire ladders or power–driven industrial trucks.

=== LOLER and rope and pulley systems ===

The Lifting Operations and Lifting Equipment Regulations (LOLER) place legal duties and responsibilities on those who own, operate or have control over lifting equipment. Rope and pulley systems are one type of lifting equipment covered by the regulations.

LOLER was created under the Health and Safety at Work etc. Act 1974, and came into force in 1998, replacing several preceding pieces of legislation which had previously regulated the use of lifting equipment. LOLER defines lifting equipment as ‘work equipment for lifting or lowering loads and includes its attachments used for anchoring, fixing or supporting it.’

The regulations require:

* That lifting equipment is strong and stable enough for safe use.
* Equipment is marked to indicate safe working loads.
* Equipment is positioned and installed so as to minimise risks.
* A competent person plans, organises and performs the safe use of the equipment.
* Equipment is subject to ongoing thorough examination and inspection.

LOLER may not apply where a lift is not used by people at work (such as a lift in a shop used by customers). However, Section 3 of the Health and Safety at Work Act imposes general responsibilities for the safety of users.

LOLER requires that lifts are thoroughly examined by a competent person at least every six months or, in the case of goods-only lifts, every 12 months. Insurance companies will generally request that a third party independent inspector carries out the inspections. The minimum requirements are:

* Every six months for lifting equipment used for lifting/lowering persons.
* Every six months for lifting accessories.
* Every 12 months for all other lifting equipment not falling into either of the categories above.

== Belt and pulley ==

Another usage of the pulley is the belt and pulley system. This system uses a pulley in conjunction with a belt drive to direct power from one place to another. The belt and pulley system can also control the speed of the motion.

This configuration consists of two or more pulleys used in conjunction with a belt. The necessary contact pressure between the belt and pulleys is ensured by appropriate tightening of the belt. This may be achieved by means of a tensioning roller or another pulley.

= Related articles on Designing Buildings Wiki =

* Lifting Operations and Lifting Equipment Regulations (LOLER).
* Lifts for buildings.
* Stairlift.
* The Science of Lifts.
* Types of crane.