Pressure independent control valves - Revision history

Designing Buildings at 08:58, 27 June 2023

2023-06-27T08:58:19Z

← Older revision		Revision as of 08:58, 27 June 2023
Line 6:		Line 6:

	[https://www.bsria.com/uk/product/NrM42B/hydronic_systems_design_set_of_2_guides_hsd2_a15d25e1/ Energy Efficient Pumping Systems, a design guide (BG 12/2011)], written by Chris Parsloe and published by BSRIA in 2011, states: ‘Sometimes referred to as a combination valve, a PICV combines the functions of a double regulating valve, differential pressure control valve and two-port control valve within a single valve body. Because the integral differential pressure control valve holds the pressure differential constant across the integral two-port control valve, the flow rate through the valve always returns to its set value whenever the control valve is fully open (since a constant pressure differential across a fixed resistance results in a constant flow rate). The opening through the two-port control valve can be varied manually, and can therefore be used to regulate the flow rate through the valve to the required design value. The flow rate can be set using an integral mechanism within the valve. Once set, the valve will perform the function of a constant flow regulator whenever the two-port control valve is fully open. Only when the control valve begins to close will the flow rate change from its set value.’		[https://www.bsria.com/uk/product/NrM42B/hydronic_systems_design_set_of_2_guides_hsd2_a15d25e1/ Energy Efficient Pumping Systems, a design guide (BG 12/2011)], written by Chris Parsloe and published by BSRIA in 2011, states: ‘Sometimes referred to as a combination valve, a PICV combines the functions of a double regulating valve, differential pressure control valve and two-port control valve within a single valve body. Because the integral differential pressure control valve holds the pressure differential constant across the integral two-port control valve, the flow rate through the valve always returns to its set value whenever the control valve is fully open (since a constant pressure differential across a fixed resistance results in a constant flow rate). The opening through the two-port control valve can be varied manually, and can therefore be used to regulate the flow rate through the valve to the required design value. The flow rate can be set using an integral mechanism within the valve. Once set, the valve will perform the function of a constant flow regulator whenever the two-port control valve is fully open. Only when the control valve begins to close will the flow rate change from its set value.’
		+
		+	[https://www.bsria.com/uk/product/NrM42B/hydronic_systems_design_set_of_2_guides_hsd2_a15d25e1/ Selection of Control Valves in Variable Flow Systems] (BG 51/2014) written by Chris Parsloe and published by BSRIA in June 2014, defines a pressure independent control valve (PICV) as: ‘A combination of an actuated two port control valve that varies the flow through a terminal device, and a differential pressure regulator that maintains a constant pressure differential across the control valve thereby ensuring that the set maximum design flow rate cannot be exceeded… Note 4: Although the majority of PICVs are of the type described above, the same objective of pressure independent control can be achieved by a combined two-port control valve and electronic flow measurement device. For products based on this approach, the control valve is fitted with an intelligent motorised actuator that enables the measured flow to be maintained at its required value regardless of pressure variations in the system. This type of valve is sometimes referred to as an “electronic PICV” and does not require an integral differential pressure controller.’
		+
		+	It suggests that typical applications include; modulating control of heating or cooling outputs from air handling units, fan coil units or chilled beams in variable flow systems. (Used without an actuator, PICVs hold flow rate constant at a fixed value regardless of changes in system pressures.)

	For more information see: What makes a good PICV?		For more information see: What makes a good PICV?

Designing Buildings at 08:27, 26 May 2023

2023-05-26T08:27:26Z

← Older revision		Revision as of 08:27, 26 May 2023
Line 4:		Line 4:

	[https://www.bsria.com/uk/product/qB4KzD/test_method_for_heat_interface_units_bts_22015_a15d25e1/ Test Method for Heat Interface Units (BTS 2/2015)], written by Colin Judd, and published by BSRIA in December 2015 and amended in June 2016, states: ‘A pressure independent control valve (PICV) operates to maintain a controlled flow rate that is, within limits, independent of the supplied differential pressure. A PICV combines the functions of a DPCV, regulating valve and control valve.’		[https://www.bsria.com/uk/product/qB4KzD/test_method_for_heat_interface_units_bts_22015_a15d25e1/ Test Method for Heat Interface Units (BTS 2/2015)], written by Colin Judd, and published by BSRIA in December 2015 and amended in June 2016, states: ‘A pressure independent control valve (PICV) operates to maintain a controlled flow rate that is, within limits, independent of the supplied differential pressure. A PICV combines the functions of a DPCV, regulating valve and control valve.’
		+
		+	[https://www.bsria.com/uk/product/NrM42B/hydronic_systems_design_set_of_2_guides_hsd2_a15d25e1/ Energy Efficient Pumping Systems, a design guide (BG 12/2011)], written by Chris Parsloe and published by BSRIA in 2011, states: ‘Sometimes referred to as a combination valve, a PICV combines the functions of a double regulating valve, differential pressure control valve and two-port control valve within a single valve body. Because the integral differential pressure control valve holds the pressure differential constant across the integral two-port control valve, the flow rate through the valve always returns to its set value whenever the control valve is fully open (since a constant pressure differential across a fixed resistance results in a constant flow rate). The opening through the two-port control valve can be varied manually, and can therefore be used to regulate the flow rate through the valve to the required design value. The flow rate can be set using an integral mechanism within the valve. Once set, the valve will perform the function of a constant flow regulator whenever the two-port control valve is fully open. Only when the control valve begins to close will the flow rate change from its set value.’

	For more information see: What makes a good PICV?		For more information see: What makes a good PICV?

Designing Buildings at 08:27, 8 July 2022

2022-07-08T08:27:37Z

← Older revision		Revision as of 08:27, 8 July 2022
Line 2:		Line 2:

	[https://www.bsria.com/uk/product/oBKRqD/illustrated_guide_to_mechanical_building_services_3rd_edition_bg_312017_a15d25e1/ The Illustrated Guide to Mechanical Building Services, Third Edition (BG 31/2017)], by David Bleicher, published by BSRIA in 2017, suggests that pressure independent control valves (PICVs) are: ‘…used in variable flow heating or cooling systems to control the output of devices such as air handling units, fan coil units or chilled beams. They regulate flow constantly during varying pressure conditions and can be placed on either the flow or the return pipe.’		[https://www.bsria.com/uk/product/oBKRqD/illustrated_guide_to_mechanical_building_services_3rd_edition_bg_312017_a15d25e1/ The Illustrated Guide to Mechanical Building Services, Third Edition (BG 31/2017)], by David Bleicher, published by BSRIA in 2017, suggests that pressure independent control valves (PICVs) are: ‘…used in variable flow heating or cooling systems to control the output of devices such as air handling units, fan coil units or chilled beams. They regulate flow constantly during varying pressure conditions and can be placed on either the flow or the return pipe.’
		+
		+	[https://www.bsria.com/uk/product/qB4KzD/test_method_for_heat_interface_units_bts_22015_a15d25e1/ Test Method for Heat Interface Units (BTS 2/2015)], written by Colin Judd, and published by BSRIA in December 2015 and amended in June 2016, states: ‘A pressure independent control valve (PICV) operates to maintain a controlled flow rate that is, within limits, independent of the supplied differential pressure. A PICV combines the functions of a DPCV, regulating valve and control valve.’

	For more information see: What makes a good PICV?		For more information see: What makes a good PICV?
Line 7:		Line 9:
	--[[User:BSRIA\|BSRIA]]		--[[User:BSRIA\|BSRIA]]

−	= Related articles on Designing Buildings ~~Wiki~~ =	+	= Related articles on Designing Buildings =

	* Actuator.		* Actuator.

Designing Buildings at 10:43, 9 July 2021

2021-07-09T10:43:16Z

← Older revision		Revision as of 10:43, 9 July 2021
Line 17:		Line 17:
	* Flow characteristics.		* Flow characteristics.
	* Pipework.		* Pipework.
		+	* Pressure-relief valve.
	* Radiator.		* Radiator.
	* Tap.		* Tap.

Designing Buildings at 07:26, 29 June 2021

2021-06-29T07:26:42Z

← Older revision		Revision as of 07:26, 29 June 2021
Line 1:		Line 1:
	[https://www.bsria.com/uk/product/BKMxLn/test_method_for_picvs_and_dpcvs_bts_12019_a15d25e1/ Test Method for PICVs and DPCVs (BTS 1/2019)], published by BSRIA in November 2019, defines a pressure independent control valve (PICV) as: ‘A valve that operates to maintain a controlled flow rate that is, within limits, independent of the supplied differential pressure. The valve may operate mechanically or electronically.’		[https://www.bsria.com/uk/product/BKMxLn/test_method_for_picvs_and_dpcvs_bts_12019_a15d25e1/ Test Method for PICVs and DPCVs (BTS 1/2019)], published by BSRIA in November 2019, defines a pressure independent control valve (PICV) as: ‘A valve that operates to maintain a controlled flow rate that is, within limits, independent of the supplied differential pressure. The valve may operate mechanically or electronically.’
		+
		+	[https://www.bsria.com/uk/product/oBKRqD/illustrated_guide_to_mechanical_building_services_3rd_edition_bg_312017_a15d25e1/ The Illustrated Guide to Mechanical Building Services, Third Edition (BG 31/2017)], by David Bleicher, published by BSRIA in 2017, suggests that pressure independent control valves (PICVs) are: ‘…used in variable flow heating or cooling systems to control the output of devices such as air handling units, fan coil units or chilled beams. They regulate flow constantly during varying pressure conditions and can be placed on either the flow or the return pipe.’

	For more information see: What makes a good PICV?		For more information see: What makes a good PICV?

Designing Buildings at 10:18, 15 April 2021

2021-04-15T10:18:40Z

← Older revision		Revision as of 10:18, 15 April 2021
Line 1:		Line 1:
−	[https://www.bsria.com/uk/product/BKMxLn/test_method_for_picvs_and_dpcvs_bts_12019_a15d25e1/ Test Method for PICVs and DPCVs (BTS 1/2019)], published by BSRIA in ~~December~~ 2019, defines a pressure independent control valve (PICV) as: ‘A valve that operates to maintain a controlled flow rate that is, within limits, independent of the supplied differential pressure. The valve may operate mechanically or electronically.’	+	[https://www.bsria.com/uk/product/BKMxLn/test_method_for_picvs_and_dpcvs_bts_12019_a15d25e1/ Test Method for PICVs and DPCVs (BTS 1/2019)], published by BSRIA in November 2019, defines a pressure independent control valve (PICV) as: ‘A valve that operates to maintain a controlled flow rate that is, within limits, independent of the supplied differential pressure. The valve may operate mechanically or electronically.’

	For more information see: What makes a good PICV?		For more information see: What makes a good PICV?

Designing Buildings at 09:44, 14 April 2021

2021-04-14T09:44:34Z

← Older revision		Revision as of 09:44, 14 April 2021
Line 8:		Line 8:

	* Actuator.		* Actuator.
		+	* BSRIA.
	* BSRIA articles on Designing Buildings Wiki.		* BSRIA articles on Designing Buildings Wiki.
	* BSRIA launches updated Valve Test Standard.		* BSRIA launches updated Valve Test Standard.

Designing Buildings at 09:23, 14 April 2021

2021-04-14T09:23:06Z

← Older revision		Revision as of 09:23, 14 April 2021
Line 11:		Line 11:
	* BSRIA launches updated Valve Test Standard.		* BSRIA launches updated Valve Test Standard.
	* BSRIA publishes new edition of BG29.		* BSRIA publishes new edition of BG29.
		+	* Differential pressure control valve.
		+	* Flow characteristics.
	* Pipework.		* Pipework.
	* Radiator.		* Radiator.

Designing Buildings at 09:15, 14 April 2021

2021-04-14T09:15:12Z

← Older revision		Revision as of 09:15, 14 April 2021
Line 1:		Line 1:
−	~~#redirect~~:[[~~What_makes_a_good_PICV?~~\|What makes a good PICV?]]	+	[https://www.bsria.com/uk/product/BKMxLn/test_method_for_picvs_and_dpcvs_bts_12019_a15d25e1/ Test Method for PICVs and DPCVs (BTS 1/2019)], published by BSRIA in December 2019, defines a pressure independent control valve (PICV) as: ‘A valve that operates to maintain a controlled flow rate that is, within limits, independent of the supplied differential pressure. The valve may operate mechanically or electronically.’
		+
		+	For more information see: What makes a good PICV?
		+
		+	--[[User:BSRIA\|BSRIA]]
		+
		+	= Related articles on Designing Buildings Wiki =
		+
		+	* Actuator.
		+	* BSRIA articles on Designing Buildings Wiki.
		+	* BSRIA launches updated Valve Test Standard.
		+	* BSRIA publishes new edition of BG29.
		+	* Pipework.
		+	* Radiator.
		+	* Tap.
		+	* Valves.
		+	* What makes a good PICV?
		+
		+	[[Category:DCN_Definition]] [[Category:DCN_Product_Knowledge]] [[Category:Definitions]] [[Category:Products_/_components]]

Designing Buildings: Redirected page to What makes a good PICV?

2020-09-25T06:04:15Z

Redirected page to What makes a good PICV?

New page

#redirect:[[What_makes_a_good_PICV?|What makes a good PICV?]]