PAS 1192-2 - Revision history

Designing Buildings: Reverted edits by 41.81.1.62 (talk) to last revision by Designing Buildings

2021-12-27T08:22:22Z

Reverted edits by 41.81.1.62 (talk) to last revision by Designing Buildings

Can't load revision 221453

at 20:32, 26 December 2021

2021-12-26T20:32:46Z

Can't load revision 221430

Designing Buildings at 11:38, 15 December 2021

2021-12-15T11:38:14Z

← Older revision		Revision as of 11:38, 15 December 2021
Line 3:		Line 3:
	Publicly Available Specifications (PAS) are fast-track standards, specifications, codes of practice or guidelines developed by sponsoring organisations to meet an immediate market need following guidelines set out by BSI (British Standards Institution). Within 2 years they are reviewed to assess whether they should be revised, withdrawn, or become formal British Standards or international standards.		Publicly Available Specifications (PAS) are fast-track standards, specifications, codes of practice or guidelines developed by sponsoring organisations to meet an immediate market need following guidelines set out by BSI (British Standards Institution). Within 2 years they are reviewed to assess whether they should be revised, withdrawn, or become formal British Standards or international standards.

−	~~[http://shop.bsigroup.com/Navigate-by/PAS/PAS-1192-22013/~~ PAS 1192-2:2013] is the Specification for information management for the capital/delivery phase of construction projects using building information modelling. It is sponsored by the Construction Industry Council (CIC) and published by The British Standards Institution. It came into effect on 28 February 2013.	+	PAS 1192-2:2013 is the Specification for information management for the capital/delivery phase of construction projects using building information modelling. It is sponsored by the Construction Industry Council (CIC) and published by The British Standards Institution. It came into effect on 28 February 2013.

	It was commissioned by CIC as part of its response to the UK Government Construction Strategy which stated that the '...Government requires fully collaborative 3D BIM (with all project and asset information, documentation and data being electronic) as a minimum by 2016'. This represents a requirement for Level 2 BIM on centrally-procured public projects. Level 2 is a managed 3D environment with data attached, but created in separate discipline models.		It was commissioned by CIC as part of its response to the UK Government Construction Strategy which stated that the '...Government requires fully collaborative 3D BIM (with all project and asset information, documentation and data being electronic) as a minimum by 2016'. This represents a requirement for Level 2 BIM on centrally-procured public projects. Level 2 is a managed 3D environment with data attached, but created in separate discipline models.
Line 73:		Line 73:
	For more information see: ISO 19650		For more information see: ISO 19650

−	= Related articles on Designing Buildings ~~Wiki~~ =	+	= Related articles on Designing Buildings =

	* Asset information.		* Asset information.
Line 106:		Line 106:
	* Whole Life Asset Performance.		* Whole Life Asset Performance.

−	~~= External references =~~	+	[[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:DCN_Standard]] [[Category:Standards_/_measurements]] [[Category:Design]] [[Category:BIM]]
−		+
−	* BSI [http://shop.bsigroup.com/Navigate-by/PAS/PAS-1192-22013/ PAS 1192 2 2013].	+
−	* [http://www.bimtaskgroup.org/ BIM Task Group].	+
−	* [http://cic.org.uk/services/the-cic-scope-of-services.php CIC Scope of Services].	+
−	* [http://www.bimtaskgroup.org/scope-of-services-for-information-management/ Outline Scope of Services for the Role of Information Management].	+
−	* [http://www.bimtaskgroup.org/bim-eirs/ Employer's Information Requirements].	+
−	* BS 1192:2007, Collaborative production of architectural, engineering and construction information – Code of practice	+
−	* CIC BIM Protocol, First Edition, 2013	+
−	* RICHARDS, M. Building Information Management – A Standard Framework and Guide to BS 1192. London, UK: BSI, 2010	+
−	* [http://www.theb1m.com/video/pas-1192-2-in-5-minutes PAS 1192-2 in 5 Minutes] (video animation)	+
−		+
−	[[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:DCN_Standard]] [[Category:~~BIM~~]] [[Category:~~Standards_/_measurements~~]] [[Category:~~Design~~]]	+

Designing Buildings at 13:08, 31 August 2020

2020-08-31T13:08:18Z

← Older revision		Revision as of 13:08, 31 August 2020
Line 106:		Line 106:
	* Whole Life Asset Performance.		* Whole Life Asset Performance.

−	=== External references ===	+	= External references =

	* BSI [http://shop.bsigroup.com/Navigate-by/PAS/PAS-1192-22013/ PAS 1192 2 2013].		* BSI [http://shop.bsigroup.com/Navigate-by/PAS/PAS-1192-22013/ PAS 1192 2 2013].
Line 118:		Line 118:
	* [http://www.theb1m.com/video/pas-1192-2-in-5-minutes PAS 1192-2 in 5 Minutes] (video animation)		* [http://www.theb1m.com/video/pas-1192-2-in-5-minutes PAS 1192-2 in 5 Minutes] (video animation)

−	[[Category:~~Standards_/_measurements~~]] [[Category:~~DCN_Standard~~]] [[Category:~~Design~~]] [[Category:BIM]]	+	[[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:DCN_Standard]] [[Category:BIM]] [[Category:Standards_/_measurements]] [[Category:Design]]

Editor: Reverted edits by 195.195.20.199 (talk) to last revision by Designing Buildings

2019-11-05T13:27:08Z

Reverted edits by 195.195.20.199 (talk) to last revision by Designing Buildings

← Older revision		Revision as of 13:27, 5 November 2019
Line 1:		Line 1:
	= Introduction =		= Introduction =

−	Publicly Available Specifications (PAS) are fast-track standards, specifications, codes of practice or guidelines developed by sponsoring organisations to meet an immediate market need following guidelines set out by BSI (British Standards Institution). Within 2 years they are ~~reviewedaa~~ to assess whether they should be revised, withdrawn, or become formal British Standards or international standards.	+	Publicly Available Specifications (PAS) are fast-track standards, specifications, codes of practice or guidelines developed by sponsoring organisations to meet an immediate market need following guidelines set out by BSI (British Standards Institution). Within 2 years they are reviewed to assess whether they should be revised, withdrawn, or become formal British Standards or international standards.

	[http://shop.bsigroup.com/Navigate-by/PAS/PAS-1192-22013/ PAS 1192-2:2013] is the Specification for information management for the capital/delivery phase of construction projects using building information modelling. It is sponsored by the Construction Industry Council (CIC) and published by The British Standards Institution. It came into effect on 28 February 2013.		[http://shop.bsigroup.com/Navigate-by/PAS/PAS-1192-22013/ PAS 1192-2:2013] is the Specification for information management for the capital/delivery phase of construction projects using building information modelling. It is sponsored by the Construction Industry Council (CIC) and published by The British Standards Institution. It came into effect on 28 February 2013.
Line 118:		Line 118:
	* [http://www.theb1m.com/video/pas-1192-2-in-5-minutes PAS 1192-2 in 5 Minutes] (video animation)		* [http://www.theb1m.com/video/pas-1192-2-in-5-minutes PAS 1192-2 in 5 Minutes] (video animation)

−	[[Category:~~BIM~~]] [[Category:~~Standards_/_measurements~~]] [[Category:Design]]	+	[[Category:Standards_/_measurements]] [[Category:DCN_Standard]] [[Category:Design]] [[Category:BIM]]

195.195.20.199 at 12:15, 5 November 2019

2019-11-05T12:15:30Z

← Older revision		Revision as of 12:15, 5 November 2019
Line 1:		Line 1:
	= Introduction =		= Introduction =

−	Publicly Available Specifications (PAS) are fast-track standards, specifications, codes of practice or guidelines developed by sponsoring organisations to meet an immediate market need following guidelines set out by BSI (British Standards Institution). Within 2 years they are ~~reviewed~~ to assess whether they should be revised, withdrawn, or become formal British Standards or international standards.	+	Publicly Available Specifications (PAS) are fast-track standards, specifications, codes of practice or guidelines developed by sponsoring organisations to meet an immediate market need following guidelines set out by BSI (British Standards Institution). Within 2 years they are reviewedaa to assess whether they should be revised, withdrawn, or become formal British Standards or international standards.

	[http://shop.bsigroup.com/Navigate-by/PAS/PAS-1192-22013/ PAS 1192-2:2013] is the Specification for information management for the capital/delivery phase of construction projects using building information modelling. It is sponsored by the Construction Industry Council (CIC) and published by The British Standards Institution. It came into effect on 28 February 2013.		[http://shop.bsigroup.com/Navigate-by/PAS/PAS-1192-22013/ PAS 1192-2:2013] is the Specification for information management for the capital/delivery phase of construction projects using building information modelling. It is sponsored by the Construction Industry Council (CIC) and published by The British Standards Institution. It came into effect on 28 February 2013.
Line 118:		Line 118:
	* [http://www.theb1m.com/video/pas-1192-2-in-5-minutes PAS 1192-2 in 5 Minutes] (video animation)		* [http://www.theb1m.com/video/pas-1192-2-in-5-minutes PAS 1192-2 in 5 Minutes] (video animation)

−	[[Category:~~Standards_/_measurements~~]] [[Category:~~Design~~]] [[Category:~~BIM~~]]	+	[[Category:BIM]] [[Category:Standards_/_measurements]] [[Category:Design]]

Designing Buildings at 07:48, 15 February 2019

2019-02-15T07:48:04Z

← Older revision		Revision as of 07:48, 15 February 2019
Line 7:		Line 7:
	It was commissioned by CIC as part of its response to the UK Government Construction Strategy which stated that the '...Government requires fully collaborative 3D BIM (with all project and asset information, documentation and data being electronic) as a minimum by 2016'. This represents a requirement for Level 2 BIM on centrally-procured public projects. Level 2 is a managed 3D environment with data attached, but created in separate discipline models.		It was commissioned by CIC as part of its response to the UK Government Construction Strategy which stated that the '...Government requires fully collaborative 3D BIM (with all project and asset information, documentation and data being electronic) as a minimum by 2016'. This represents a requirement for Level 2 BIM on centrally-procured public projects. Level 2 is a managed 3D environment with data attached, but created in separate discipline models.

−	PAS 1192-2 specifies the requirements for achieving building information modelling (BIM) Level 2 during the capital / delivery phase of projects. It builds on the existing code of practice for the collaborative production of architectural, engineering and construction information, defined by BS 1192:2007 and is one of a number of standards, protocols and tools available to support the adoption of level 2 BIM in the construction industry:	+	PAS 1192-2 specifies the requirements for achieving building information modelling (BIM) Level 2 during the capital / delivery phase of projects. It builds on the existing code of practice for the collaborative production of architectural, engineering and construction information, defined by BS 1192:2007 (now replaced by BS EN ISO 19650) and is one of a number of standards, protocols and tools available to support the adoption of level 2 BIM in the construction industry:

−	* BS 1192:2007 Collaborative production of architectural, engineering and construction information. Code of practice.	+	* BS 1192:2007 Collaborative production of architectural, engineering and construction information. Code of practice. (now replaced by BS EN ISO 19650)
	* BS 8536-1:2015 Briefing for design and construction. Code of practice for facilities management (Buildings infrastructure).		* BS 8536-1:2015 Briefing for design and construction. Code of practice for facilities management (Buildings infrastructure).
	* BS 8536-2:2016 Design and construction: Code of practice for asset management (Linear and geographical infrastructure).		* BS 8536-2:2016 Design and construction: Code of practice for asset management (Linear and geographical infrastructure).

Editor at 14:55, 6 February 2019

2019-02-06T14:55:02Z

← Older revision		Revision as of 14:55, 6 February 2019
Line 104:		Line 104:
	* Task information delivery plan.		* Task information delivery plan.
	* Uniclass.		* Uniclass.
−	* Whole ~~life asset performance - staying ahead of the curve~~.	+	* Whole Life Asset Performance.

	=== External references ===		=== External references ===

Editor at 13:25, 6 February 2019

2019-02-06T13:25:57Z

← Older revision		Revision as of 13:25, 6 February 2019
Line 104:		Line 104:
	* Task information delivery plan.		* Task information delivery plan.
	* Uniclass.		* Uniclass.
		+	* Whole life asset performance - staying ahead of the curve.

	=== External references ===		=== External references ===

Editor at 17:46, 28 January 2019

2019-01-28T17:46:27Z

← Older revision		Revision as of 17:46, 28 January 2019
Line 75:		Line 75:
	= Related articles on Designing Buildings Wiki =		= Related articles on Designing Buildings Wiki =

		+	* Asset information.
	* Asset information model.		* Asset information model.
	* BIM.		* BIM.