Designing Buildings at 08:49, 24 June 2022

2022-06-24T08:49:04Z

← Older revision		Revision as of 08:49, 24 June 2022
Line 1:		Line 1:
−	Motion, occupancy or vacancy sensors are used in a variety of situations within and around buildings, for security and lighting control as well as more continual in-use monitoring and assessment. A key specification of sensors that monitor use on a more continual basis is that they need to do so whilst maintaining privacy of individuals and thus be compliant with the General Data Protection Regulations (GDPR) compliant. Below a variety of different examples are given.	+	= Introduction =

−	~~== Passive Infrared~~ (~~PIR~~) ~~sensors ==~~	+	Motion, occupancy or vacancy sensors are used in a variety of situations within and around buildings, for security and lighting control as well as more continual in-use monitoring and assessment. A key specification of sensors that monitor use on a more continual basis is that they need to do so whilst maintaining the privacy of individuals and thus comply with the General Data Protection Regulations (GDPR).

−	~~Passive Infrared (PIR) sensors- are small, low powered and cost effective, they sense~~ a ~~change in temperature between the background and a warm heat emitting body. Everything emits low-level radiation, the pyro-electric sensor detects the differing levels~~ of infrared radiation and thus senses movement or presence. Also called presence detectors these might be used within rooms such as offices, cubicles such as in washrooms or on the underside or desks or tables to detect occupancy.	+	Below a variety of different examples are given.

−	== ~~Microwave~~ sensors ==	+	= Passive infrared (PIR) sensors =
		+
		+	Passive infrared (PIR) sensors- are small, low powered and cost effective, they sense a changes in temperature between the background and a warm heat emitting body. Everything emits low-level radiation, the pyro-electric sensor detects the differing levels of infrared radiation and thus senses movement or presence. Also called presence detectors these might be used within rooms such as offices, cubicles such as in washrooms or on the underside or desks or tables to detect occupancy.
		+
		+	= Microwave sensors =

	Microwave sensors have a wider range but are more expensive, vulnerable to electrical interference and with the ability to penetrate surfaces which can cause false alarms. Continuous waves of microwave radiation or a high radio frequency are sent outwards and the reflections off an object are measured by noting the shift in frequency as the waves return.		Microwave sensors have a wider range but are more expensive, vulnerable to electrical interference and with the ability to penetrate surfaces which can cause false alarms. Continuous waves of microwave radiation or a high radio frequency are sent outwards and the reflections off an object are measured by noting the shift in frequency as the waves return.

−	== Dual ~~Tech~~/~~Hybrid =~~=	+	= Dual tech/hybrid =

−	Dual ~~Tech~~/~~Hybrid~~ sensors are a combination of the above, so that both sensors need to sense changes to cause a trigger which reduces the number of false alarms, from wind movement or temperature changes etc.	+	Dual tech/hybrid sensors are a combination of the above, so that both sensors need to sense changes to cause a trigger which reduces the number of false alarms, from wind movement or temperature changes etc.

−	== People counters ==	+	= People counters =

	People counters are a more general term for any of the above that focus on recording the number of occupants at a post or entering and leaving a space, they do so through a variety of technical means.		People counters are a more general term for any of the above that focus on recording the number of occupants at a post or entering and leaving a space, they do so through a variety of technical means.

−	== Time-of flight ==	+	= Time-of flight =

−	Time-of flight are similar to people counters often using the reflection of an infrared beam on a sensor, to calculate ~~and determine~~ if occupants are moving towards or away from a point, for example as an entry/exit sensor.	+	Time-of flight sensors are similar to people counters, often using the reflection of an infrared beam on a sensor, to calculate if occupants are moving towards or away from a point, for example as an entry/exit sensor.

−	== Infrared arrays ==	+	= Infrared arrays =

−	Infrared arrays use the same technology as described but have greater capacity to detect directional movement within spaces and as such are able to assess how occupants might move around a building or room.	+	Infrared arrays use the same technology as described above but have greater capacity to detect directional movement within spaces and as such are able to assess how occupants might move around a building or room.

−	== People flow sensors ==	+	= People flow sensors =

−	People flow sensors, is a more generic term for sensors that can detect more accurately movement in a space in the same way infrared arrays can. These can monitor the real-time movement or flow of people around a space~~, they~~ only detect movement, not faces, as such are not cameras which makes them privacy and GDPR compliant.	+	People flow sensors, is a more generic term for sensors that can detect more accurately movement in a space in the same way infrared arrays can. These can monitor the real-time movement or flow of people around a space. They only detect movement, not faces, and as such are not cameras which makes them privacy and GDPR compliant.

	= Related articles on Designing Buildings =		= Related articles on Designing Buildings =

Editor: Created page with "Motion, occupancy or vacancy sensors are used in a variety of situations within and around buildings, for security and lighting control as well as more continual in-use monitorin..."

2022-06-20T10:37:40Z

Created page with "Motion, occupancy or vacancy sensors are used in a variety of situations within and around buildings, for security and lighting control as well as more continual in-use monitorin..."

New page

Motion, occupancy or vacancy sensors are used in a variety of situations within and around buildings, for security and lighting control as well as more continual in-use monitoring and assessment. A key specification of sensors that monitor use on a more continual basis is that they need to do so whilst maintaining privacy of individuals and thus be compliant with the General Data Protection Regulations (GDPR) compliant. Below a variety of different examples are given.

== Passive Infrared (PIR) sensors ==

Passive Infrared (PIR) sensors- are small, low powered and cost effective, they sense a change in temperature between the background and a warm heat emitting body. Everything emits low-level radiation, the pyro-electric sensor detects the differing levels of infrared radiation and thus senses movement or presence. Also called presence detectors these might be used within rooms such as offices, cubicles such as in washrooms or on the underside or desks or tables to detect occupancy.

== Microwave sensors ==

Microwave sensors have a wider range but are more expensive, vulnerable to electrical interference and with the ability to penetrate surfaces which can cause false alarms. Continuous waves of microwave radiation or a high radio frequency are sent outwards and the reflections off an object are measured by noting the shift in frequency as the waves return.

== Dual Tech/Hybrid ==

Dual Tech/Hybrid sensors are a combination of the above, so that both sensors need to sense changes to cause a trigger which reduces the number of false alarms, from wind movement or temperature changes etc.

== People counters ==

People counters are a more general term for any of the above that focus on recording the number of occupants at a post or entering and leaving a space, they do so through a variety of technical means.

== Time-of flight ==

Time-of flight are similar to people counters often using the reflection of an infrared beam on a sensor, to calculate and determine if occupants are moving towards or away from a point, for example as an entry/exit sensor.

== Infrared arrays ==

Infrared arrays use the same technology as described but have greater capacity to detect directional movement within spaces and as such are able to assess how occupants might move around a building or room.

== People flow sensors ==

People flow sensors, is a more generic term for sensors that can detect more accurately movement in a space in the same way infrared arrays can. These can monitor the real-time movement or flow of people around a space, they only detect movement, not faces, as such are not cameras which makes them privacy and GDPR compliant.

= Related articles on Designing Buildings =

* Access control.
* CCTV.
* Commercial security systems.
* Digital door lock market.
* Distributed fibre-optic strain sensors
* Electric motor.
* Electrical energy.
* Electrical power.
* Entry control.
* Home security solutions market.
* How door locks work.
* MEMS and Sensors Market Segments, Size, Emerging Growth Factors, Top Key Players and Business Opportunities till 2027
* Outbuildings security.
* Perimeter security.
* Proximity access control system.
* Security and the built environment.
* Security glazing.
* Types of alarm.
* Types of door.
* Types of lock.
* Types of sensors.
* Ubiquitous sensors to assess energy consumption and wellbeing in domestic environments
* Visitor door entry system.
* Volatile organic compounds VOC

[[Category:DCN_Definition]] [[Category:DCN_Product_Knowledge]] [[Category:Definitions]] [[Category:Products_/_components]]

Motion sensors - Revision history

Designing Buildings at 08:49, 24 June 2022

Editor: Created page with "Motion, occupancy or vacancy sensors are used in a variety of situations within and around buildings, for security and lighting control as well as more continual in-use monitorin..."