Low Temperature Air Source Heat Pumps LTASHP - Revision history

Editor: moved Low Temperature Air Source Heat Pumps (LTASHP) to Low Temperature Air Source Heat Pumps LTASHP

2025-12-07T07:22:50Z

moved Low Temperature Air Source Heat Pumps (LTASHP) to Low Temperature Air Source Heat Pumps LTASHP

← Older revision

Revision as of 07:22, 7 December 2025

Editor at 07:15, 7 December 2025

2025-12-07T07:15:25Z

← Older revision		Revision as of 07:15, 7 December 2025
Line 5:		Line 5:
	All ASHPs work by running a refrigerant fluid in heat exchanger coils through the external air. The fluid ‘absorbs’ heat from the air and boils, even at temperatures below 0° C (although the coefficient of performance (COP) decreases with lower temperature). The gas is then compressed, which further increases its temperature or dual compressed for high temperature systems and passed into heat exchanger coils, where it condenses, releasing its latent heat. The process then repeats. It is the same process that is used to extract heat from a fridge and can be used domestically or commercially and some systems can also be used to extract heat from buildings to provide cooling.		All ASHPs work by running a refrigerant fluid in heat exchanger coils through the external air. The fluid ‘absorbs’ heat from the air and boils, even at temperatures below 0° C (although the coefficient of performance (COP) decreases with lower temperature). The gas is then compressed, which further increases its temperature or dual compressed for high temperature systems and passed into heat exchanger coils, where it condenses, releasing its latent heat. The process then repeats. It is the same process that is used to extract heat from a fridge and can be used domestically or commercially and some systems can also be used to extract heat from buildings to provide cooling.

−	[[Category:~~Articles_needing_more_work~~]]	+	= Related articles on Designing Buildings =
		+
		+	* Absorption heat pump.
		+	* Actuator.
		+	* BSRIA domestic hot water heat pumps testing.
		+	* Coefficient of Performance CoP.
		+	* Combined heat and power CHP.
		+	* Earth-to-air heat exchangers.
		+	* Exhaust air heat pump.
		+	* Geothermal piles.
		+	* Green Deal.
		+	* Ground energy options.
		+	* Ground pre-conditioning of supply air.
		+	* Ground source heat pumps.
		+	* Heat pump.
		+	* High Temperature Air Source Heat Pumps HTASHP.
		+	* Product Characteristics Database PCDB.
		+	* Renewable energy.
		+	* Renewable Heat Incentive.
		+	* Room-based heat pumps.
		+	* Solar-assisted heat pump.
		+	* Solar thermal systems.
		+	* Thermal labyrinths.
		+	* Water-source heat pumps.
		+	* What is diversity in HVAC systems?
		+
		+	[[Category:DCN_Commentary]] [[Category:DCN_Definition]] [[Category:DCN_Product_Knowledge]] [[Category:DCN_Specification]] [[Category:Definitions]] [[Category:Standards_/_measurements]] [[Category:Sustainability]]

Editor at 18:16, 5 December 2025

2025-12-05T18:16:46Z

← Older revision		Revision as of 18:16, 5 December 2025
Line 1:		Line 1:
−	xx	+	Air source heat pumps (ASHPs) use the external air as a heat source to provide heat for buildings, there are effectively three types of ASHP, differentiated by the output temperatures they can achieve; high, medium or low temperature. Low-Temperature Air Source Heat Pumps (LTASHPs) describe standard ASHPs running at output or flow temperatures with a maximum of around 55°C.
		+
		+	Low Temperature Air Source Heat Pumps (LTASHPs) are suitable for systems such as underfloor heating or larger surface radiator systems. Other systems that achieve slighter warmer temperatures of around 65°C might be referred to as Medium Temperature Air Source Heat Pumps (MTASHPs). Finally High-Temperature Air Source Heat Pumps (HTASHPs) which tend to use more robust components and specialised refrigerants (such as R290/R32), as well as dual compression systems can achieve hotter temperatures than standard ASHPs in the region of 70-80°C.
		+
		+	All ASHPs work by running a refrigerant fluid in heat exchanger coils through the external air. The fluid ‘absorbs’ heat from the air and boils, even at temperatures below 0° C (although the coefficient of performance (COP) decreases with lower temperature). The gas is then compressed, which further increases its temperature or dual compressed for high temperature systems and passed into heat exchanger coils, where it condenses, releasing its latent heat. The process then repeats. It is the same process that is used to extract heat from a fridge and can be used domestically or commercially and some systems can also be used to extract heat from buildings to provide cooling.

	[[Category:Articles_needing_more_work]]		[[Category:Articles_needing_more_work]]

Editor: moved Low temperature air source heat pumps to Low Temperature Air Source Heat Pumps (LTASHP)

2025-12-05T18:07:20Z

moved Low temperature air source heat pumps to Low Temperature Air Source Heat Pumps (LTASHP)

← Older revision

Revision as of 18:07, 5 December 2025

Editor: Created page with "xx Category:Articles_needing_more_work "

2025-12-05T18:06:47Z

Created page with "xx Category:Articles_needing_more_work "

New page

xx

[[Category:Articles_needing_more_work]]