Designing Buildings: Created page with "The [https://codes.iccsafe.org/content/IRC2018/chapter-2-definitions 2018 International Residential Code] (IRC), published by the International Code Council (ICC) defines grade p..."

2021-06-25T09:06:46Z

Created page with "The [https://codes.iccsafe.org/content/IRC2018/chapter-2-definitions 2018 International Residential Code] (IRC), published by the International Code Council (ICC) defines grade p..."

New page

The [https://codes.iccsafe.org/content/IRC2018/chapter-2-definitions 2018 International Residential Code] (IRC), published by the International Code Council (ICC) defines grade plane as: ‘A reference plane representing the average of the finished ground level adjoining the building at all exterior walls. Where the finished ground level slopes away from the exterior walls, the reference plane shall be established by the lowest points within the area between the building and the lot line or, where the lot line is more than 6 feet (1829 mm) from the building between the structure and a point 6 feet (1829 mm) from the building.’

= Related articles on Designing Buildings Wiki =

* At grade.
* Building height.
* Datum.
* Finished floor level.
* Measurement.
* Ordnance datum.
* Origin point.
* Setting out.

[[Category:DCN_Definition]] [[Category:Definitions]] [[Category:Standards_/_measurements]]

Grade plane - Revision history

Designing Buildings: Created page with "The [https://codes.iccsafe.org/content/IRC2018/chapter-2-definitions 2018 International Residential Code] (IRC), published by the International Code Council (ICC) defines grade p..."