<?xml version="1.0"?>
<?xml-stylesheet type="text/css" href="https://www.designingbuildings.co.uk/skins/common/feed.css?301"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en">
		<id>https://www.designingbuildings.co.uk/w/index.php?action=history&amp;feed=atom&amp;title=Extending_an_interwar_Art_Deco_house</id>
		<title>Extending an interwar Art Deco house - Revision history</title>
		<link rel="self" type="application/atom+xml" href="https://www.designingbuildings.co.uk/w/index.php?action=history&amp;feed=atom&amp;title=Extending_an_interwar_Art_Deco_house"/>
		<link rel="alternate" type="text/html" href="https://www.designingbuildings.co.uk/w/index.php?title=Extending_an_interwar_Art_Deco_house&amp;action=history"/>
		<updated>2026-11-18T22:54:06Z</updated>
		<subtitle>Revision history for this page on the wiki</subtitle>
		<generator>MediaWiki 1.17.4</generator>

	<entry>
		<id>https://www.designingbuildings.co.uk/w/index.php?title=Extending_an_interwar_Art_Deco_house&amp;diff=326807&amp;oldid=prev</id>
		<title>Van Peake: New article: extending an interwar Art Deco house, with a Balham case study</title>
		<link rel="alternate" type="text/html" href="https://www.designingbuildings.co.uk/w/index.php?title=Extending_an_interwar_Art_Deco_house&amp;diff=326807&amp;oldid=prev"/>
				<updated>2026-11-17T20:33:56Z</updated>
		
		<summary type="html">&lt;p&gt;New article: extending an interwar Art Deco house, with a Balham case study&lt;/p&gt;
&lt;table style=&quot;background-color: white; color:black;&quot;&gt;
			&lt;col class='diff-marker' /&gt;
			&lt;col class='diff-content' /&gt;
			&lt;col class='diff-marker' /&gt;
			&lt;col class='diff-content' /&gt;
		&lt;tr valign='top'&gt;
		&lt;td colspan='2' style=&quot;background-color: white; color:black;&quot;&gt;← Older revision&lt;/td&gt;
		&lt;td colspan='2' style=&quot;background-color: white; color:black;&quot;&gt;Revision as of 20:33, 17 November 2026&lt;/td&gt;
		&lt;/tr&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 1:&lt;/td&gt;
&lt;td colspan=&quot;2&quot; class=&quot;diff-lineno&quot;&gt;Line 1:&lt;/td&gt;&lt;/tr&gt;
&lt;tr&gt;&lt;td class='diff-marker'&gt;&amp;minus;&lt;/td&gt;&lt;td style=&quot;background: #ffa; color:black; font-size: smaller;&quot;&gt;&lt;div&gt;== Introduction == Drive through the outer parts of south and west London and you pass street after street of 1930s semis built in a pared-back Art Deco style. Smooth render, curved bays, steel windows with slim horizontal glazing bars and, more often than not, a hipped roof. Many were put up quickly and cheaply. They have worn well all the same, and the people who own them usually want more space without losing the look that drew them to the house in the first place. That is where it gets awkward. Most of what makes these houses recognisable sits on the surface: a curve here, a painted sill there. A clumsy extension or one careless window replacement can wipe it out far faster than it would on a Victorian terrace, where the brickwork and the proportions do most of the work. This article covers the practical side of extending one, using a 1930s semi in Balham, south London, as a worked example. [[File:Balham_Art_Deco_house_front_and_rear_elevations.jpg|thumb|none|600px|Left: the front elevation, with the full-height side extension and its tall vertical window on the right-hand side. Right: the rear, with the single-storey extension and the slate-clad dormer above it.]] == What is worth holding on to == Start with the front. The curved bays carry most of the character, and on plenty of houses they are the only original element left, the steel windows having gone to uPVC decades ago. Where the old frames survive, repair is often possible. Where they don't, a slim steel or steel-look replacement that follows the original glazing bar pattern goes a long way. Colour matters more than people expect. On the Balham house the curved sills are picked out in yellow and the front door was painted the same shade to tie in with them. It costs next to nothing, and it does more for the view from the street than most of the building work. Inside, the hall and the staircase are where period feel tends to survive, if it survives at all. == Side extensions == Compared with a terrace, an interwar semi usually has more room at the side, often a driveway or the footprint of an old lean-to garage, and a shallower garden. So the extra space tends to come from the side and the roof rather than from pushing a long way into the garden. Permitted development only covers a single-storey side extension, no more than four metres high and no wider than half the width of the original house. Anything on two storeys needs a full planning application. On the Balham house the side extension runs the full height of the building. It is finished in smooth white render to match, and the roof pitch carries straight on from the existing hip, so from the pavement it reads as part of the house rather than something bolted on. The one deliberate departure is a single vertical window, roughly four metres tall, which lights the hall and the landing above it. Set against the horizontal lines of the original, it reads as new without making a fuss about it. == Rear and wraparound extensions == For a rear extension on a semi-detached house, permitted development allows a depth of three metres, or up to six metres through the prior approval process for larger home extensions. Combine side and rear into a wraparound and a full application is almost always needed. In Balham the two legs of the extension meet around the original rear projection. The result is one continuous ground floor room, not two rooms with a doorway between them. Externally the roof is flat at the garden edge; inside, it rises to a valley with a rooflight on either side. One of those rooflights runs tight against the old rear wall, and from the kitchen you can look up through it at the original first-floor window. A small detail, but it keeps the old house in view from inside the new one. The rear elevation itself is plain: a large fixed pane on one side, sliding doors on the other, and a paved terrace that steps down to the lawn. [[File:Balham_Art_Deco_house_wraparound_kitchen_and_hall.jpg|thumb|none|600px|Left: the kitchen and dining space under the vaulted ceiling, with the original first-floor window visible through the right-hand rooflight. Right: steel-framed glazed doors between the hall and the extension.]] == Loft conversion == A rear dormer is the usual way to get a properly usable room into a hipped interwar roof. Outside conservation areas, a semi-detached house can add up to 50 cubic metres of roof volume under permitted development, provided the materials look similar to the existing house. The Balham dormer is clad in slate, with two tall windows facing the garden, and it gave the house a full extra floor. At the front, the roof keeps its original slope, with rooflights and solar panels set into it, so the street elevation is unchanged apart from the side extension. == Conservation areas == Inside a conservation area a lot of this changes. Side extensions, dormers and other roof additions all need planning permission, and so does cladding an external wall in render or pebble dash. Article 4 directions can remove further rights on top of that. Wandsworth, which covers Balham, has dozens of conservation areas. In Balham they include the Nightingale Triangle and the Heaver Estate. Check the street before anybody draws anything. It decides whether the scheme is a permitted development job or a full application, and that difference shows up in the programme as months rather than weeks. == Construction points == * '''Render.''' New render rarely matches old at the first attempt, in colour or in texture, so sample panels are worth the time. A movement joint where the new structure meets the old is sensible too. Some differential movement is close to inevitable, and a planned joint looks a good deal better than a crack. * '''Valley gutters.''' Where a wraparound roof meets the original rear projection, the valley takes the water off both slopes. The falls, the outlet and the flashing around any rooflight beside it need to be right first time, because it is a fiddly place to put things right later. * '''Party walls.''' A semi shares one party wall, and foundations for a side or rear extension are very often within three metres of next door. Notices under the Party Wall etc. Act 1996 should go out early. Served late, they are one of the commonest reasons a start date slips. * '''Internal glazing.''' Steel-framed glazed doors between the hall and a new kitchen keep the light moving through the house and echo the original windows. In Balham a pair of black steel-framed doors does exactly that job. == Case study: Balham == The house is a 1930s Art Deco semi in Balham, SW12. It had three additions built in one programme: a two-storey side extension, a single-storey wraparound at the back and a slate-clad rear dormer. The ground floor roughly doubled in area and the house gained a floor. The kitchen has floor-to-ceiling walnut units, a grey stone splashback and a stone-topped island with open shelving built into its end. The staircase was rebuilt in dark oak with slim black spindles and now runs from the entrance hall up to the second floor. Fitted joinery carries on through the rest of the house: full-height wardrobes in the bedrooms, storage under the stairs, and display cabinetry with log storage in the front reception room beside an inset gas fire. Building all three pieces at once meant one scaffold, one round of structural work and one fit-out, rather than three separate upheavals. From the street, it still looks like what it is: a 1930s semi. [[File:Balham_Art_Deco_house_reception_and_staircase.jpg|thumb|none|600px|Left: fitted display cabinetry and log storage in the front reception room. Right: the rebuilt dark oak staircase, with the steel-framed doors to the extension beyond.]] == Related articles on Designing Buildings == * [[Types of house extensions]] * [[Permitted development]] * [[Prior approval]] * [[Planning permission]] * [[Lawful development certificate]] * [[Conservation area]] * [[Article 4 direction]] * [[Party Wall etc. Act 1996]] * [[Loft conversion]] * [[Dormer]] * [[Rooflight]] * [[Render]] * [[Movement joint]] --[[User:Van Peake|Van Peake]] 20:&lt;del class=&quot;diffchange diffchange-inline&quot;&gt;31&lt;/del&gt;, 17 November 2026 (UTC) [[Category:Design]]&lt;/div&gt;&lt;/td&gt;&lt;td class='diff-marker'&gt;+&lt;/td&gt;&lt;td style=&quot;background: #cfc; color:black; font-size: smaller;&quot;&gt;&lt;div&gt;== Introduction == Drive through the outer parts of south and west London and you pass street after street of 1930s semis built in a pared-back Art Deco style. Smooth render, curved bays, steel windows with slim horizontal glazing bars and, more often than not, a hipped roof. Many were put up quickly and cheaply. They have worn well all the same, and the people who own them usually want more space without losing the look that drew them to the house in the first place. That is where it gets awkward. Most of what makes these houses recognisable sits on the surface: a curve here, a painted sill there. A clumsy extension or one careless window replacement can wipe it out far faster than it would on a Victorian terrace, where the brickwork and the proportions do most of the work. This article covers the practical side of extending one, using a 1930s semi in Balham, south London, as a worked example. [[File:Balham_Art_Deco_house_front_and_rear_elevations.jpg|thumb|none|600px|Left: the front elevation, with the full-height side extension and its tall vertical window on the right-hand side. Right: the rear, with the single-storey extension and the slate-clad dormer above it.]] == What is worth holding on to == Start with the front. The curved bays carry most of the character, and on plenty of houses they are the only original element left, the steel windows having gone to uPVC decades ago. Where the old frames survive, repair is often possible. Where they don't, a slim steel or steel-look replacement that follows the original glazing bar pattern goes a long way. Colour matters more than people expect. On the Balham house the curved sills are picked out in yellow and the front door was painted the same shade to tie in with them. It costs next to nothing, and it does more for the view from the street than most of the building work. Inside, the hall and the staircase are where period feel tends to survive, if it survives at all. == Side extensions == Compared with a terrace, an interwar semi usually has more room at the side, often a driveway or the footprint of an old lean-to garage, and a shallower garden. So the extra space tends to come from the side and the roof rather than from pushing a long way into the garden. Permitted development only covers a single-storey side extension, no more than four metres high and no wider than half the width of the original house. Anything on two storeys needs a full planning application. On the Balham house the side extension runs the full height of the building. It is finished in smooth white render to match, and the roof pitch carries straight on from the existing hip, so from the pavement it reads as part of the house rather than something bolted on. The one deliberate departure is a single vertical window, roughly four metres tall, which lights the hall and the landing above it. Set against the horizontal lines of the original, it reads as new without making a fuss about it. == Rear and wraparound extensions == For a rear extension on a semi-detached house, permitted development allows a depth of three metres, or up to six metres through the prior approval process for larger home extensions. Combine side and rear into a wraparound and a full application is almost always needed. In Balham the two legs of the extension meet around the original rear projection. The result is one continuous ground floor room, not two rooms with a doorway between them. Externally the roof is flat at the garden edge; inside, it rises to a valley with a rooflight on either side. One of those rooflights runs tight against the old rear wall, and from the kitchen you can look up through it at the original first-floor window. A small detail, but it keeps the old house in view from inside the new one. The rear elevation itself is plain: a large fixed pane on one side, sliding doors on the other, and a paved terrace that steps down to the lawn. [[File:Balham_Art_Deco_house_wraparound_kitchen_and_hall.jpg|thumb|none|600px|Left: the kitchen and dining space under the vaulted ceiling, with the original first-floor window visible through the right-hand rooflight. Right: steel-framed glazed doors between the hall and the extension.]] == Loft conversion == A rear dormer is the usual way to get a properly usable room into a hipped interwar roof. Outside conservation areas, a semi-detached house can add up to 50 cubic metres of roof volume under permitted development, provided the materials look similar to the existing house. The Balham dormer is clad in slate, with two tall windows facing the garden, and it gave the house a full extra floor. At the front, the roof keeps its original slope, with rooflights and solar panels set into it, so the street elevation is unchanged apart from the side extension. == Conservation areas == Inside a conservation area a lot of this changes. Side extensions, dormers and other roof additions all need planning permission, and so does cladding an external wall in render or pebble dash. Article 4 directions can remove further rights on top of that. Wandsworth, which covers Balham, has dozens of conservation areas. In Balham they include the Nightingale Triangle and the Heaver Estate. Check the street before anybody draws anything. It decides whether the scheme is a permitted development job or a full application, and that difference shows up in the programme as months rather than weeks. == Construction points == * '''Render.''' New render rarely matches old at the first attempt, in colour or in texture, so sample panels are worth the time. A movement joint where the new structure meets the old is sensible too. Some differential movement is close to inevitable, and a planned joint looks a good deal better than a crack. * '''Valley gutters.''' Where a wraparound roof meets the original rear projection, the valley takes the water off both slopes. The falls, the outlet and the flashing around any rooflight beside it need to be right first time, because it is a fiddly place to put things right later. * '''Party walls.''' A semi shares one party wall, and foundations for a side or rear extension are very often within three metres of next door. Notices under the Party Wall etc. Act 1996 should go out early. Served late, they are one of the commonest reasons a start date slips. * '''Internal glazing.''' Steel-framed glazed doors between the hall and a new kitchen keep the light moving through the house and echo the original windows. In Balham a pair of black steel-framed doors does exactly that job. == Case study: Balham == The house is a 1930s Art Deco semi in Balham, SW12. It had three additions built in one programme: a two-storey side extension, a single-storey wraparound at the back and a slate-clad rear dormer. The ground floor roughly doubled in area and the house gained a floor. The kitchen has floor-to-ceiling walnut units, a grey stone splashback and a stone-topped island with open shelving built into its end. The staircase was rebuilt in dark oak with slim black spindles and now runs from the entrance hall up to the second floor. Fitted joinery carries on through the rest of the house: full-height wardrobes in the bedrooms, storage under the stairs, and display cabinetry with log storage in the front reception room beside an inset gas fire. Building all three pieces at once meant one scaffold, one round of structural work and one fit-out, rather than three separate upheavals. From the street, it still looks like what it is: a 1930s semi. [[File:Balham_Art_Deco_house_reception_and_staircase.jpg|thumb|none|600px|Left: fitted display cabinetry and log storage in the front reception room. Right: the rebuilt dark oak staircase, with the steel-framed doors to the extension beyond.]] == Related articles on Designing Buildings == * [[Types of house extensions]] * [[Permitted development]] * [[Prior approval]] * [[Planning permission]] * [[Lawful development certificate]] * [[Conservation area]] * [[Article 4 direction]] * [[Party Wall etc. Act 1996]] * [[Loft conversion]] * [[Dormer]] * [[Rooflight]] * [[Render]] * [[Movement joint]] --[[User:Van Peake|Van Peake]] 20:&lt;ins class=&quot;diffchange diffchange-inline&quot;&gt;33&lt;/ins&gt;, 17 November 2026 (UTC) [[Category:Design]]&lt;/div&gt;&lt;/td&gt;&lt;/tr&gt;
&lt;/table&gt;</summary>
		<author><name>Van Peake</name></author>	</entry>

	<entry>
		<id>https://www.designingbuildings.co.uk/w/index.php?title=Extending_an_interwar_Art_Deco_house&amp;diff=326806&amp;oldid=prev</id>
		<title>Van Peake: New article: extending an interwar Art Deco house, with a Balham case study</title>
		<link rel="alternate" type="text/html" href="https://www.designingbuildings.co.uk/w/index.php?title=Extending_an_interwar_Art_Deco_house&amp;diff=326806&amp;oldid=prev"/>
				<updated>2026-11-17T20:31:16Z</updated>
		
		<summary type="html">&lt;p&gt;New article: extending an interwar Art Deco house, with a Balham case study&lt;/p&gt;
&lt;p&gt;&lt;b&gt;New page&lt;/b&gt;&lt;/p&gt;&lt;div&gt;== Introduction == Drive through the outer parts of south and west London and you pass street after street of 1930s semis built in a pared-back Art Deco style. Smooth render, curved bays, steel windows with slim horizontal glazing bars and, more often than not, a hipped roof. Many were put up quickly and cheaply. They have worn well all the same, and the people who own them usually want more space without losing the look that drew them to the house in the first place. That is where it gets awkward. Most of what makes these houses recognisable sits on the surface: a curve here, a painted sill there. A clumsy extension or one careless window replacement can wipe it out far faster than it would on a Victorian terrace, where the brickwork and the proportions do most of the work. This article covers the practical side of extending one, using a 1930s semi in Balham, south London, as a worked example. [[File:Balham_Art_Deco_house_front_and_rear_elevations.jpg|thumb|none|600px|Left: the front elevation, with the full-height side extension and its tall vertical window on the right-hand side. Right: the rear, with the single-storey extension and the slate-clad dormer above it.]] == What is worth holding on to == Start with the front. The curved bays carry most of the character, and on plenty of houses they are the only original element left, the steel windows having gone to uPVC decades ago. Where the old frames survive, repair is often possible. Where they don't, a slim steel or steel-look replacement that follows the original glazing bar pattern goes a long way. Colour matters more than people expect. On the Balham house the curved sills are picked out in yellow and the front door was painted the same shade to tie in with them. It costs next to nothing, and it does more for the view from the street than most of the building work. Inside, the hall and the staircase are where period feel tends to survive, if it survives at all. == Side extensions == Compared with a terrace, an interwar semi usually has more room at the side, often a driveway or the footprint of an old lean-to garage, and a shallower garden. So the extra space tends to come from the side and the roof rather than from pushing a long way into the garden. Permitted development only covers a single-storey side extension, no more than four metres high and no wider than half the width of the original house. Anything on two storeys needs a full planning application. On the Balham house the side extension runs the full height of the building. It is finished in smooth white render to match, and the roof pitch carries straight on from the existing hip, so from the pavement it reads as part of the house rather than something bolted on. The one deliberate departure is a single vertical window, roughly four metres tall, which lights the hall and the landing above it. Set against the horizontal lines of the original, it reads as new without making a fuss about it. == Rear and wraparound extensions == For a rear extension on a semi-detached house, permitted development allows a depth of three metres, or up to six metres through the prior approval process for larger home extensions. Combine side and rear into a wraparound and a full application is almost always needed. In Balham the two legs of the extension meet around the original rear projection. The result is one continuous ground floor room, not two rooms with a doorway between them. Externally the roof is flat at the garden edge; inside, it rises to a valley with a rooflight on either side. One of those rooflights runs tight against the old rear wall, and from the kitchen you can look up through it at the original first-floor window. A small detail, but it keeps the old house in view from inside the new one. The rear elevation itself is plain: a large fixed pane on one side, sliding doors on the other, and a paved terrace that steps down to the lawn. [[File:Balham_Art_Deco_house_wraparound_kitchen_and_hall.jpg|thumb|none|600px|Left: the kitchen and dining space under the vaulted ceiling, with the original first-floor window visible through the right-hand rooflight. Right: steel-framed glazed doors between the hall and the extension.]] == Loft conversion == A rear dormer is the usual way to get a properly usable room into a hipped interwar roof. Outside conservation areas, a semi-detached house can add up to 50 cubic metres of roof volume under permitted development, provided the materials look similar to the existing house. The Balham dormer is clad in slate, with two tall windows facing the garden, and it gave the house a full extra floor. At the front, the roof keeps its original slope, with rooflights and solar panels set into it, so the street elevation is unchanged apart from the side extension. == Conservation areas == Inside a conservation area a lot of this changes. Side extensions, dormers and other roof additions all need planning permission, and so does cladding an external wall in render or pebble dash. Article 4 directions can remove further rights on top of that. Wandsworth, which covers Balham, has dozens of conservation areas. In Balham they include the Nightingale Triangle and the Heaver Estate. Check the street before anybody draws anything. It decides whether the scheme is a permitted development job or a full application, and that difference shows up in the programme as months rather than weeks. == Construction points == * '''Render.''' New render rarely matches old at the first attempt, in colour or in texture, so sample panels are worth the time. A movement joint where the new structure meets the old is sensible too. Some differential movement is close to inevitable, and a planned joint looks a good deal better than a crack. * '''Valley gutters.''' Where a wraparound roof meets the original rear projection, the valley takes the water off both slopes. The falls, the outlet and the flashing around any rooflight beside it need to be right first time, because it is a fiddly place to put things right later. * '''Party walls.''' A semi shares one party wall, and foundations for a side or rear extension are very often within three metres of next door. Notices under the Party Wall etc. Act 1996 should go out early. Served late, they are one of the commonest reasons a start date slips. * '''Internal glazing.''' Steel-framed glazed doors between the hall and a new kitchen keep the light moving through the house and echo the original windows. In Balham a pair of black steel-framed doors does exactly that job. == Case study: Balham == The house is a 1930s Art Deco semi in Balham, SW12. It had three additions built in one programme: a two-storey side extension, a single-storey wraparound at the back and a slate-clad rear dormer. The ground floor roughly doubled in area and the house gained a floor. The kitchen has floor-to-ceiling walnut units, a grey stone splashback and a stone-topped island with open shelving built into its end. The staircase was rebuilt in dark oak with slim black spindles and now runs from the entrance hall up to the second floor. Fitted joinery carries on through the rest of the house: full-height wardrobes in the bedrooms, storage under the stairs, and display cabinetry with log storage in the front reception room beside an inset gas fire. Building all three pieces at once meant one scaffold, one round of structural work and one fit-out, rather than three separate upheavals. From the street, it still looks like what it is: a 1930s semi. [[File:Balham_Art_Deco_house_reception_and_staircase.jpg|thumb|none|600px|Left: fitted display cabinetry and log storage in the front reception room. Right: the rebuilt dark oak staircase, with the steel-framed doors to the extension beyond.]] == Related articles on Designing Buildings == * [[Types of house extensions]] * [[Permitted development]] * [[Prior approval]] * [[Planning permission]] * [[Lawful development certificate]] * [[Conservation area]] * [[Article 4 direction]] * [[Party Wall etc. Act 1996]] * [[Loft conversion]] * [[Dormer]] * [[Rooflight]] * [[Render]] * [[Movement joint]] --[[User:Van Peake|Van Peake]] 20:31, 17 November 2026 (UTC) [[Category:Design]]&lt;/div&gt;</summary>
		<author><name>Van Peake</name></author>	</entry>

	</feed>