Dry-bulb temperature - Revision history

Editor at 17:56, 3 February 2022

2022-02-03T17:56:48Z

← Older revision		Revision as of 17:56, 3 February 2022
Line 9:		Line 9:
	= Related articles on Designing Buildings =		= Related articles on Designing Buildings =

−	* Condensation	+	* Condensation.
		+	* Dehumidification.
	* Globe temperature.		* Globe temperature.
	* Humidification.		* Humidification.

Editor at 16:31, 2 February 2022

2022-02-02T16:31:24Z

← Older revision		Revision as of 16:31, 2 February 2022
Line 7:		Line 7:
	Dry-bulb temperature can be used as to express a component of thermal comfort. For example, the wet bulb globe temperature index (WBGT) is widely used for the assessment of heat stress and combines wet-bulb temperature, dry-bulb temperature and globe temperature (mean radiant temperature).		Dry-bulb temperature can be used as to express a component of thermal comfort. For example, the wet bulb globe temperature index (WBGT) is widely used for the assessment of heat stress and combines wet-bulb temperature, dry-bulb temperature and globe temperature (mean radiant temperature).

−	~~= FIND OUT MORE =~~	+	= Related articles on Designing Buildings =
−		+
−	=== Related articles on Designing Buildings ~~Wiki ==~~=	+

	* Condensation		* Condensation
	* Globe temperature.		* Globe temperature.
		+	* Humidification.
	* Humidity.		* Humidity.
	* Mean radiant temperature.		* Mean radiant temperature.

Designing Buildings at 06:36, 24 September 2020

2020-09-24T06:36:25Z

← Older revision		Revision as of 06:36, 24 September 2020
Line 1:		Line 1:
−
	Dry-bulb temperature (Tdb, DBT or Td), is a measure of air temperature. It is referred to as dry-bulb temperature because the thermometer bulb is dry and so the temperature recorded does not vary with the moisture content of the air. This is as opposed to wet-bulb temperature which is the temperature recorded by a thermometer that has its bulb wrapped in cloth and moistened with distilled water. Wet-bulb temperatures are the same as dry-bulb temperatures at a relative humidity of 100%, but otherwise wet-bulb temperatures will be lower than dry-bulb temperatures due to the cooling effect of evaporation (described as wet-bulb depression).		Dry-bulb temperature (Tdb, DBT or Td), is a measure of air temperature. It is referred to as dry-bulb temperature because the thermometer bulb is dry and so the temperature recorded does not vary with the moisture content of the air. This is as opposed to wet-bulb temperature which is the temperature recorded by a thermometer that has its bulb wrapped in cloth and moistened with distilled water. Wet-bulb temperatures are the same as dry-bulb temperatures at a relative humidity of 100%, but otherwise wet-bulb temperatures will be lower than dry-bulb temperatures due to the cooling effect of evaporation (described as wet-bulb depression).

Line 11:		Line 10:

	=== Related articles on Designing Buildings Wiki ===		=== Related articles on Designing Buildings Wiki ===
−	*Condensation
−	*Globe temperature.
−	*Humidity.
−	*Mean radiant temperature.
−	*Operative temperature.
−	*Predicted mean vote.
−	*Psychometric chart.
−	*Running mean temperature.
−	*Sling psychrometer.
−	*Thermal comfort.
−	*Thermal indices.
−	*Temperature.
−	*Wet-bulb temperature.

−	[[Category:~~Standards_/_measurements~~]] [[Category:~~DCN_Standard~~]]	+	* Condensation
		+	* Globe temperature.
		+	* Humidity.
		+	* Mean radiant temperature.
		+	* Operative temperature.
		+	* Predicted mean vote.
		+	* Psychometric chart.
		+	* Running mean temperature.
		+	* Sling psychrometer.
		+	* Thermal comfort.
		+	* Thermal indices.
		+	* Temperature.
		+	* Wet-bulb temperature.
		+
		+	[[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:Standards_/_measurements]]

Designing Buildings: Reverted edits by 197.210.28.231 (talk) to last revision by Designing Buildings

2019-04-22T09:03:48Z

Reverted edits by 197.210.28.231 (talk) to last revision by Designing Buildings

← Older revision		Revision as of 09:03, 22 April 2019
Line 1:		Line 1:
		+
	Dry-bulb temperature (Tdb, DBT or Td), is a measure of air temperature. It is referred to as dry-bulb temperature because the thermometer bulb is dry and so the temperature recorded does not vary with the moisture content of the air. This is as opposed to wet-bulb temperature which is the temperature recorded by a thermometer that has its bulb wrapped in cloth and moistened with distilled water. Wet-bulb temperatures are the same as dry-bulb temperatures at a relative humidity of 100%, but otherwise wet-bulb temperatures will be lower than dry-bulb temperatures due to the cooling effect of evaporation (described as wet-bulb depression).		Dry-bulb temperature (Tdb, DBT or Td), is a measure of air temperature. It is referred to as dry-bulb temperature because the thermometer bulb is dry and so the temperature recorded does not vary with the moisture content of the air. This is as opposed to wet-bulb temperature which is the temperature recorded by a thermometer that has its bulb wrapped in cloth and moistened with distilled water. Wet-bulb temperatures are the same as dry-bulb temperatures at a relative humidity of 100%, but otherwise wet-bulb temperatures will be lower than dry-bulb temperatures due to the cooling effect of evaporation (described as wet-bulb depression).

−	A sling ~~Psychrometrics~~ holds both wet and dry-bulb thermometers and can be used to express the physical and thermal properties of moist air on a ~~Psychrometrics~~ chart.	+	A sling psychrometer holds both wet and dry-bulb thermometers and can be used to express the physical and thermal properties of moist air on a psychrometric chart.

	Dry-bulb temperature can be measured by a thermometer exposed to the air but shielded from radiation and moisture. It can be expressed in Celsius (C), Fahrenheit (F) or Kelvin (K).		Dry-bulb temperature can be measured by a thermometer exposed to the air but shielded from radiation and moisture. It can be expressed in Celsius (C), Fahrenheit (F) or Kelvin (K).
Line 10:		Line 11:

	=== Related articles on Designing Buildings Wiki ===		=== Related articles on Designing Buildings Wiki ===
		+	*Condensation
		+	*Globe temperature.
		+	*Humidity.
		+	*Mean radiant temperature.
		+	*Operative temperature.
		+	*Predicted mean vote.
		+	*Psychometric chart.
		+	*Running mean temperature.
		+	*Sling psychrometer.
		+	*Thermal comfort.
		+	*Thermal indices.
		+	*Temperature.
		+	*Wet-bulb temperature.

−	* Condensation	+	[[Category:Standards_/_measurements]] [[Category:DCN_Standard]]
−	* Globe temperature.	+
−	* Humidity.	+
−	* Mean radiant temperature.	+
−	* Operative temperature.	+
−	* Predicted mean vote.	+
−	* Psychometric chart.	+
−	* Running mean temperature.	+
−	* Sling psychrometer.	+
−	* Thermal comfort.	+
−	* Thermal indices.	+
−	* Temperature.	+
−	* Wet-bulb temperature.	+
−		+
−	[[Category:Standards_/_measurements]]	+

197.210.28.231 at 07:51, 22 April 2019

2019-04-22T07:51:35Z

← Older revision		Revision as of 07:51, 22 April 2019
Line 1:		Line 1:
−
	Dry-bulb temperature (Tdb, DBT or Td), is a measure of air temperature. It is referred to as dry-bulb temperature because the thermometer bulb is dry and so the temperature recorded does not vary with the moisture content of the air. This is as opposed to wet-bulb temperature which is the temperature recorded by a thermometer that has its bulb wrapped in cloth and moistened with distilled water. Wet-bulb temperatures are the same as dry-bulb temperatures at a relative humidity of 100%, but otherwise wet-bulb temperatures will be lower than dry-bulb temperatures due to the cooling effect of evaporation (described as wet-bulb depression).		Dry-bulb temperature (Tdb, DBT or Td), is a measure of air temperature. It is referred to as dry-bulb temperature because the thermometer bulb is dry and so the temperature recorded does not vary with the moisture content of the air. This is as opposed to wet-bulb temperature which is the temperature recorded by a thermometer that has its bulb wrapped in cloth and moistened with distilled water. Wet-bulb temperatures are the same as dry-bulb temperatures at a relative humidity of 100%, but otherwise wet-bulb temperatures will be lower than dry-bulb temperatures due to the cooling effect of evaporation (described as wet-bulb depression).

−	A sling ~~psychrometer~~ holds both wet and dry-bulb thermometers and can be used to express the physical and thermal properties of moist air on a ~~psychrometric~~ chart.	+	A sling Psychrometrics holds both wet and dry-bulb thermometers and can be used to express the physical and thermal properties of moist air on a Psychrometrics chart.

	Dry-bulb temperature can be measured by a thermometer exposed to the air but shielded from radiation and moisture. It can be expressed in Celsius (C), Fahrenheit (F) or Kelvin (K).		Dry-bulb temperature can be measured by a thermometer exposed to the air but shielded from radiation and moisture. It can be expressed in Celsius (C), Fahrenheit (F) or Kelvin (K).
Line 11:		Line 10:

	=== Related articles on Designing Buildings Wiki ===		=== Related articles on Designing Buildings Wiki ===
−	*Condensation	+
−	*Globe temperature.	+	* Condensation
−	*Humidity.	+	* Globe temperature.
−	*Mean radiant temperature.	+	* Humidity.
−	*Operative temperature.	+	* Mean radiant temperature.
−	*Predicted mean vote.	+	* Operative temperature.
−	*Psychometric chart.	+	* Predicted mean vote.
−	*Running mean temperature.	+	* Psychometric chart.
−	*Sling psychrometer.	+	* Running mean temperature.
−	*Thermal comfort.	+	* Sling psychrometer.
−	*Thermal indices.	+	* Thermal comfort.
−	*Temperature.	+	* Thermal indices.
−	*Wet-bulb temperature.	+	* Temperature.
		+	* Wet-bulb temperature.

	[[Category:Standards_/_measurements]]		[[Category:Standards_/_measurements]]

Designing Buildings at 07:08, 13 November 2015

2015-11-13T07:08:48Z

← Older revision		Revision as of 07:08, 13 November 2015
Line 6:		Line 6:
	Dry-bulb temperature can be measured by a thermometer exposed to the air but shielded from radiation and moisture. It can be expressed in Celsius (C), Fahrenheit (F) or Kelvin (K).		Dry-bulb temperature can be measured by a thermometer exposed to the air but shielded from radiation and moisture. It can be expressed in Celsius (C), Fahrenheit (F) or Kelvin (K).

−	Dry-bulb temperature can be used as to express a component of thermal comfort. For example, the wet bulb globe temperature index (WBGT) is widely used for the assessment of heat stress ~~(see [http://www.hse.gov.uk/temperature/heatstress/measuring/wetbulb.htm HSE])~~ and combines wet-bulb temperature, dry-bulb temperature and globe temperature (mean radiant temperature).	+	Dry-bulb temperature can be used as to express a component of thermal comfort. For example, the wet bulb globe temperature index (WBGT) is widely used for the assessment of heat stress and combines wet-bulb temperature, dry-bulb temperature and globe temperature (mean radiant temperature).

	= FIND OUT MORE =		= FIND OUT MORE =

Designing Buildings at 15:22, 8 July 2014

2014-07-08T15:22:06Z

← Older revision		Revision as of 15:22, 8 July 2014
Line 25:		Line 25:
	*Wet-bulb temperature.		*Wet-bulb temperature.

−	[[Category:~~Sustainability]]~~	+	[[Category:Standards_/_measurements]]
−	~~[[Category:Theory~~]]	+

Designing Buildings at 08:01, 10 January 2014

2014-01-10T08:01:14Z

← Older revision		Revision as of 08:01, 10 January 2014
Line 11:		Line 11:

	=== Related articles on Designing Buildings Wiki ===		=== Related articles on Designing Buildings Wiki ===
−	~~<ul >~~	+	*Condensation
−	~~<li>~~Globe temperature.~~</li>~~	+	*Globe temperature.
−	~~<li>~~Psychometric ~~charts~~.~~</li>~~	+	*Humidity.
−	~~<li>~~Sling psychrometer.~~</li>~~	+	*Mean radiant temperature.
−	~~<li>~~Thermal comfort.~~</li>~~	+	*Operative temperature.
−	~~<li>~~Thermal indices.~~</li>~~	+	*Predicted mean vote.
−	~~<li>~~Wet-bulb temperature.~~</li>~~	+	*Psychometric chart.
−	~~</ul>~~	+	*Running mean temperature.
		+	*Sling psychrometer.
		+	*Thermal comfort.
		+	*Thermal indices.
		+	*Temperature.
		+	*Wet-bulb temperature.

	[[Category:Sustainability]]		[[Category:Sustainability]]
	[[Category:Theory]]		[[Category:Theory]]

86.166.224.29 at 08:14, 7 January 2014

2014-01-07T08:14:25Z

← Older revision		Revision as of 08:14, 7 January 2014
Line 7:		Line 7:

	Dry-bulb temperature can be used as to express a component of thermal comfort. For example, the wet bulb globe temperature index (WBGT) is widely used for the assessment of heat stress (see [http://www.hse.gov.uk/temperature/heatstress/measuring/wetbulb.htm HSE]) and combines wet-bulb temperature, dry-bulb temperature and globe temperature (mean radiant temperature).		Dry-bulb temperature can be used as to express a component of thermal comfort. For example, the wet bulb globe temperature index (WBGT) is widely used for the assessment of heat stress (see [http://www.hse.gov.uk/temperature/heatstress/measuring/wetbulb.htm HSE]) and combines wet-bulb temperature, dry-bulb temperature and globe temperature (mean radiant temperature).
		+
		+	= FIND OUT MORE =
		+
		+	=== Related articles on Designing Buildings Wiki ===
		+	<ul >
		+	<li>Globe temperature.</li>
		+	<li>Psychometric charts.</li>
		+	<li>Sling psychrometer.</li>
		+	<li>Thermal comfort.</li>
		+	<li>Thermal indices.</li>
		+	<li>Wet-bulb temperature.</li>
		+	</ul>

	[[Category:Sustainability]]		[[Category:Sustainability]]
	[[Category:Theory]]		[[Category:Theory]]

Designing Buildings at 14:43, 3 January 2014

2014-01-03T14:43:35Z

← Older revision		Revision as of 14:43, 3 January 2014
Line 1:		Line 1:

−	Dry-bulb temperature (Tdb, DBT or Td), is a measure of air temperature. It is referred to as dry-bulb temperature because the thermometer bulb is dry and so the temperature recorded does not vary with the moisture content of the air. This is as opposed to ~~the~~ wet-bulb temperature which is the temperature recorded by a thermometer that has its bulb wrapped in cloth and moistened with distilled water. Wet-bulb temperatures are the same as dry-bulb temperatures at a relative humidity of 100%, but otherwise wet-bulb temperatures will be lower than dry-bulb temperatures due to the cooling effect of evaporation (described as wet-bulb depression).	+	Dry-bulb temperature (Tdb, DBT or Td), is a measure of air temperature. It is referred to as dry-bulb temperature because the thermometer bulb is dry and so the temperature recorded does not vary with the moisture content of the air. This is as opposed to wet-bulb temperature which is the temperature recorded by a thermometer that has its bulb wrapped in cloth and moistened with distilled water. Wet-bulb temperatures are the same as dry-bulb temperatures at a relative humidity of 100%, but otherwise wet-bulb temperatures will be lower than dry-bulb temperatures due to the cooling effect of evaporation (described as wet-bulb depression).
−		+
−	~~Dry-bulb temperature can be measured by a thermometer exposed to the air but shielded from radiation and moisture. It can be expressed in Celsius (C), Fahrenheit (F) or Kelvin (K~~).	+

	A sling psychrometer holds both wet and dry-bulb thermometers and can be used to express the physical and thermal properties of moist air on a psychrometric chart.		A sling psychrometer holds both wet and dry-bulb thermometers and can be used to express the physical and thermal properties of moist air on a psychrometric chart.
		+
		+	Dry-bulb temperature can be measured by a thermometer exposed to the air but shielded from radiation and moisture. It can be expressed in Celsius (C), Fahrenheit (F) or Kelvin (K).

	Dry-bulb temperature can be used as to express a component of thermal comfort. For example, the wet bulb globe temperature index (WBGT) is widely used for the assessment of heat stress (see [http://www.hse.gov.uk/temperature/heatstress/measuring/wetbulb.htm HSE]) and combines wet-bulb temperature, dry-bulb temperature and globe temperature (mean radiant temperature).		Dry-bulb temperature can be used as to express a component of thermal comfort. For example, the wet bulb globe temperature index (WBGT) is widely used for the assessment of heat stress (see [http://www.hse.gov.uk/temperature/heatstress/measuring/wetbulb.htm HSE]) and combines wet-bulb temperature, dry-bulb temperature and globe temperature (mean radiant temperature).