Displacement ventilation - Revision history

Designing Buildings at 08:28, 5 July 2021

2021-07-05T08:28:37Z

← Older revision		Revision as of 08:28, 5 July 2021
Line 19:		Line 19:
	NB Underfloor air distribution (UFAD) is sometimes considered to be a form of displacement ventilation. This uses the underfloor plenum beneath a raised floor to provide air through floor diffusers directly to the occupied zone. However, in some UFAD systems, the available diffuser area for UFAD is smaller, and so the supply velocity higher and supplied through diffusers that create greater mixing of the internal air than is generally found in displacement ventilation.		NB Underfloor air distribution (UFAD) is sometimes considered to be a form of displacement ventilation. This uses the underfloor plenum beneath a raised floor to provide air through floor diffusers directly to the occupied zone. However, in some UFAD systems, the available diffuser area for UFAD is smaller, and so the supply velocity higher and supplied through diffusers that create greater mixing of the internal air than is generally found in displacement ventilation.

−	~~= Find out more =~~	+	= Related articles on Designing Buildings Wiki =
−		+
−	=== Related articles on Designing Buildings Wiki ===	+

	* CFD.		* CFD.
Line 28:		Line 26:
	* Mechanical ventilation.		* Mechanical ventilation.
	* Thermal comfort.		* Thermal comfort.
		+	* Types of ventilation.
	* Ventilation.		* Ventilation.

	[[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:Design]]		[[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:Design]]

Designing Buildings at 09:04, 30 October 2020

2020-10-30T09:04:47Z

← Older revision		Revision as of 09:04, 30 October 2020
Line 1:		Line 1:
−
	Displacement ventilation (DV) first emerged as a ventilation strategy in the 1970’s. It can lower energy consumption and improve air quality by supplying ‘fresh’ air direct to the occupied zones in buildings.		Displacement ventilation (DV) first emerged as a ventilation strategy in the 1970’s. It can lower energy consumption and improve air quality by supplying ‘fresh’ air direct to the occupied zones in buildings.

Line 23:		Line 22:

	=== Related articles on Designing Buildings Wiki ===		=== Related articles on Designing Buildings Wiki ===
−	*CFD.
−	*Cooling.
−	*Heating.
−	*Mechanical ventilation.
−	*Thermal comfort.
−	*Ventilation.

−	[[Category:Design]]	+	* CFD.
		+	* Cooling.
		+	* Heating.
		+	* Mechanical ventilation.
		+	* Thermal comfort.
		+	* Ventilation.
		+
		+	[[Category:DCN_Definition]] [[Category:DCN_Guidance]] [[Category:Design]]

Designing Buildings at 11:47, 17 November 2014

2014-11-17T11:47:31Z

← Older revision		Revision as of 11:47, 17 November 2014
Line 2:		Line 2:
	Displacement ventilation (DV) first emerged as a ventilation strategy in the 1970’s. It can lower energy consumption and improve air quality by supplying ‘fresh’ air direct to the occupied zones in buildings.		Displacement ventilation (DV) first emerged as a ventilation strategy in the 1970’s. It can lower energy consumption and improve air quality by supplying ‘fresh’ air direct to the occupied zones in buildings.

−	In ‘conventional’ mixing ventilation systems, air is supplied to occupied spaces at a relatively high velocity at ceiling level. This supply air mixes within the internal air, and a proportion of ~~this~~ mixed air is extracted. Mixing ventilation systems may also re-circulate some of the internal air with the supply air.	+	In ‘conventional’ mixing ventilation systems, air is supplied to occupied spaces at a relatively high velocity at ceiling level. This supply air mixes within the internal air, and a proportion of the mixed air is then extracted. Mixing ventilation systems may also re-circulate some of the internal air with the supply air.

	Displacement ventilation systems supply low-velocity ventilation air at low level, close to the floor, creating a pool of cool, fresh air in the zone where people are likely to be. This air then heats up when it comes into contact with building occupants, equipment, lighting and so on. As it becomes warmer, so it becomes more buoyant and rises through the space, creating a thermal plume that drives ‘stale’ air upwards, where it is extracted. So, the fresh supply air ‘displaces’ the stale internal air.		Displacement ventilation systems supply low-velocity ventilation air at low level, close to the floor, creating a pool of cool, fresh air in the zone where people are likely to be. This air then heats up when it comes into contact with building occupants, equipment, lighting and so on. As it becomes warmer, so it becomes more buoyant and rises through the space, creating a thermal plume that drives ‘stale’ air upwards, where it is extracted. So, the fresh supply air ‘displaces’ the stale internal air.

−	This avoids the potential for ‘short circuiting’, in conventional mixing systems, where supply air is extracted ~~without~~ properly ~~ventilating~~ the occupied space.	+	This avoids the potential for ‘short circuiting’ which can occur in conventional mixing systems, where supply air is extracted before it has properly ventilated the occupied space.

−	Displacement ventilation tends to operate with lower air velocity, lower fan speeds, and higher supply air temperature compared to mixing ventilation systems. This avoids ~~drafts~~ and large temperature differences within the occupied zone which might otherwise cause discomfort.	+	Displacement ventilation tends to operate with lower air velocity, lower fan speeds, and higher supply air temperature compared to mixing ventilation systems. This avoids draughts and large temperature differences within the occupied zone which might otherwise cause discomfort.

−	Air is supplied through special, low velocity diffusers which must be relatively large in area to provide adequate ventilation at low speeds. Diffusers are typically wall mounted, corner mounted or freestanding. The lower fan speed associated with displacement ventilation tends to result in less noise.	+	Air is supplied through special, low-velocity diffusers which must be relatively large in area to provide adequate ventilation at low speeds. Diffusers are typically wall mounted, corner mounted or freestanding. The lower fan speed associated with displacement ventilation tends to result in less noise.

−	Displacement ventilation can supply ~~cooled~~ air, or can simply supply fresh ventilation air, sometimes with cooling provided by other sources, such as radiant chilled ceilings. It can be used to provide low level heating, but is not a particularly effective method of heating, as warm air will tend to rise rapidly, before it has heated the occupied space.	+	Displacement ventilation can supply cool air, or can simply supply fresh ventilation air, sometimes with cooling provided by other sources, such as radiant chilled ceilings. It can be used to provide low level heating, but is not a particularly effective method of heating, as warm air will tend to rise rapidly, before it has properly heated the occupied space.

	Displacement ventilation is particularly suited to high-occupancy, open-plan spaces with high ceilings that allow thermal stratification, such as theatres.		Displacement ventilation is particularly suited to high-occupancy, open-plan spaces with high ceilings that allow thermal stratification, such as theatres.

−	In small spaces, such as school classrooms, displacement ventilation may be relatively straightforward and might be designed by following accepted ‘rules of thumb’. However in more complex spaces such as theatres, computational fluid dynamics (CFD) analysis might be necessary to ~~design~~ and size ~~displacement ventilation systems~~.	+	In small spaces, such as school classrooms, displacement ventilation may be relatively straightforward and might be designed by following accepted ‘rules of thumb’. However in more complex spaces such as theatres, computational fluid dynamics (CFD) analysis might be necessary to model air flows and help size equipment.

−	NB Underfloor air distribution (UFAD) is sometimes considered to be a form of displacement ventilation. This uses the underfloor plenum beneath a raised floor to provide ~~conditioned~~ air through floor diffusers directly to the occupied zone. However, in some systems, the available diffuser area for UFAD is smaller, and so the supply velocity higher, supplied through diffusers that create greater mixing of the internal air than is generally found in displacement ventilation.	+	NB Underfloor air distribution (UFAD) is sometimes considered to be a form of displacement ventilation. This uses the underfloor plenum beneath a raised floor to provide air through floor diffusers directly to the occupied zone. However, in some UFAD systems, the available diffuser area for UFAD is smaller, and so the supply velocity higher and supplied through diffusers that create greater mixing of the internal air than is generally found in displacement ventilation.

	= Find out more =		= Find out more =

Designing Buildings: Created page with " Displacement ventilation (DV) first emerged as a ventilation strategy in the 1970’s. It can lower energy consumption and improve air quality by supplying ‘fresh’ air direc..."

2014-11-17T11:40:04Z

Created page with " Displacement ventilation (DV) first emerged as a ventilation strategy in the 1970’s. It can lower energy consumption and improve air quality by supplying ‘fresh’ air direc..."

New page

Displacement ventilation (DV) first emerged as a ventilation strategy in the 1970’s. It can lower energy consumption and improve air quality by supplying ‘fresh’ air direct to the occupied zones in buildings.

In ‘conventional’ mixing ventilation systems, air is supplied to occupied spaces at a relatively high velocity at ceiling level. This supply air mixes within the internal air, and a proportion of this mixed air is extracted. Mixing ventilation systems may also re-circulate some of the internal air with the supply air.

Displacement ventilation systems supply low-velocity ventilation air at low level, close to the floor, creating a pool of cool, fresh air in the zone where people are likely to be. This air then heats up when it comes into contact with building occupants, equipment, lighting and so on. As it becomes warmer, so it becomes more buoyant and rises through the space, creating a thermal plume that drives ‘stale’ air upwards, where it is extracted. So, the fresh supply air ‘displaces’ the stale internal air.

This avoids the potential for ‘short circuiting’, in conventional mixing systems, where supply air is extracted without properly ventilating the occupied space.

Displacement ventilation tends to operate with lower air velocity, lower fan speeds, and higher supply air temperature compared to mixing ventilation systems. This avoids drafts and large temperature differences within the occupied zone which might otherwise cause discomfort.

Air is supplied through special, low velocity diffusers which must be relatively large in area to provide adequate ventilation at low speeds. Diffusers are typically wall mounted, corner mounted or freestanding. The lower fan speed associated with displacement ventilation tends to result in less noise.

Displacement ventilation can supply cooled air, or can simply supply fresh ventilation air, sometimes with cooling provided by other sources, such as radiant chilled ceilings. It can be used to provide low level heating, but is not a particularly effective method of heating, as warm air will tend to rise rapidly, before it has heated the occupied space.

Displacement ventilation is particularly suited to high-occupancy, open-plan spaces with high ceilings that allow thermal stratification, such as theatres.

In small spaces, such as school classrooms, displacement ventilation may be relatively straightforward and might be designed by following accepted ‘rules of thumb’. However in more complex spaces such as theatres, computational fluid dynamics (CFD) analysis might be necessary to design and size displacement ventilation systems.

NB Underfloor air distribution (UFAD) is sometimes considered to be a form of displacement ventilation. This uses the underfloor plenum beneath a raised floor to provide conditioned air through floor diffusers directly to the occupied zone. However, in some systems, the available diffuser area for UFAD is smaller, and so the supply velocity higher, supplied through diffusers that create greater mixing of the internal air than is generally found in displacement ventilation.

= Find out more =

=== Related articles on Designing Buildings Wiki ===
*CFD.
*Cooling.
*Heating.
*Mechanical ventilation.
*Thermal comfort.
*Ventilation.

[[Category:Design]]