Design Philosophy - Revision history

Designing Buildings: Redirected page to Design methodology for building projects

2020-12-06T08:28:27Z

Redirected page to Design methodology for building projects

← Older revision		Revision as of 08:28, 6 December 2020
Line 1:		Line 1:
−	~~This article needs more work. To help develop this article, click 'Edit this article' above.~~	+	#redirect:[[Design_methodology_for_building_projects\|Design methodology for building projects]]
−		+
−	~~See also design~~ methodology ~~and briefing documents~~	+
−		+
−	~~-----~~	+
−	~~It is very important at the outset of any project to decide on what you want. Some of the most important aspects of a~~ building are often considered so late in the design process that they cannot be incorporated properly. This is particularly true of insulation and this translates into target U-values which in turn translate into wall thicknesses and can preclude some design features. The target U-values should be clearly set as should air tightness targets. So often the minimum standards that are allowed by the building regulations are taken on as acceptable; yet within a very few years these have changed. A U-values of as close to 0.1 and airtightness of less than one would both be good to aim at.	+

	[[Category:Articles_needing_more_work]] [[Category:DCN_Definition]]		[[Category:Articles_needing_more_work]] [[Category:DCN_Definition]]

Designing Buildings at 08:27, 6 December 2020

2020-12-06T08:27:15Z

← Older revision		Revision as of 08:27, 6 December 2020
Line 1:		Line 1:
−
	This article needs more work. To help develop this article, click 'Edit this article' above.		This article needs more work. To help develop this article, click 'Edit this article' above.

	See also design methodology and briefing documents		See also design methodology and briefing documents

−	----	+	-----
−		+
	It is very important at the outset of any project to decide on what you want. Some of the most important aspects of a building are often considered so late in the design process that they cannot be incorporated properly. This is particularly true of insulation and this translates into target U-values which in turn translate into wall thicknesses and can preclude some design features. The target U-values should be clearly set as should air tightness targets. So often the minimum standards that are allowed by the building regulations are taken on as acceptable; yet within a very few years these have changed. A U-values of as close to 0.1 and airtightness of less than one would both be good to aim at.		It is very important at the outset of any project to decide on what you want. Some of the most important aspects of a building are often considered so late in the design process that they cannot be incorporated properly. This is particularly true of insulation and this translates into target U-values which in turn translate into wall thicknesses and can preclude some design features. The target U-values should be clearly set as should air tightness targets. So often the minimum standards that are allowed by the building regulations are taken on as acceptable; yet within a very few years these have changed. A U-values of as close to 0.1 and airtightness of less than one would both be good to aim at.

−	[[Category:Articles_needing_more_work]]	+	[[Category:Articles_needing_more_work]] [[Category:DCN_Definition]]

Designing Buildings at 10:06, 5 March 2015

2015-03-05T10:06:36Z

← Older revision		Revision as of 10:06, 5 March 2015
Line 1:		Line 1:

	This article needs more work. To help develop this article, click 'Edit this article' above.		This article needs more work. To help develop this article, click 'Edit this article' above.
		+
		+	See also design methodology and briefing documents

	----		----

86.146.204.17 at 16:04, 2 December 2014

2014-12-02T16:04:21Z

← Older revision		Revision as of 16:04, 2 December 2014
Line 1:		Line 1:
		+
		+	This article needs more work. To help develop this article, click 'Edit this article' above.
		+
		+	----

	It is very important at the outset of any project to decide on what you want. Some of the most important aspects of a building are often considered so late in the design process that they cannot be incorporated properly. This is particularly true of insulation and this translates into target U-values which in turn translate into wall thicknesses and can preclude some design features. The target U-values should be clearly set as should air tightness targets. So often the minimum standards that are allowed by the building regulations are taken on as acceptable; yet within a very few years these have changed. A U-values of as close to 0.1 and airtightness of less than one would both be good to aim at.		It is very important at the outset of any project to decide on what you want. Some of the most important aspects of a building are often considered so late in the design process that they cannot be incorporated properly. This is particularly true of insulation and this translates into target U-values which in turn translate into wall thicknesses and can preclude some design features. The target U-values should be clearly set as should air tightness targets. So often the minimum standards that are allowed by the building regulations are taken on as acceptable; yet within a very few years these have changed. A U-values of as close to 0.1 and airtightness of less than one would both be good to aim at.

	[[Category:Articles_needing_more_work]]		[[Category:Articles_needing_more_work]]

Tony C at 11:07, 4 October 2014

2014-10-04T11:07:38Z

← Older revision		Revision as of 11:07, 4 October 2014
Line 1:		Line 1:

−	It is very important at the outset of any project to decide on what you want. Some of the most important aspects of a building are often considered so late in the design process that they cannot be incorporated properly. This is particularly true of insulation and this translates into target U-values which in turn translate into wall thicknesses and can preclude some design features. The target U-values should be clearly set as should air tightness targets. So often the minimum standards that are allowed by the building regulations are taken on as acceptable; yet within a very few years these have changed. A ~~target~~ U-values of as close to 0.1 and airtightness of less than one ~~are not~~ at ~~all unreasonable~~.	+	It is very important at the outset of any project to decide on what you want. Some of the most important aspects of a building are often considered so late in the design process that they cannot be incorporated properly. This is particularly true of insulation and this translates into target U-values which in turn translate into wall thicknesses and can preclude some design features. The target U-values should be clearly set as should air tightness targets. So often the minimum standards that are allowed by the building regulations are taken on as acceptable; yet within a very few years these have changed. A U-values of as close to 0.1 and airtightness of less than one would both be good to aim at.

	[[Category:Articles_needing_more_work]]		[[Category:Articles_needing_more_work]]

Tony C at 14:43, 2 October 2014

2014-10-02T14:43:35Z

← Older revision		Revision as of 14:43, 2 October 2014
Line 1:		Line 1:

−	It is very important at the outset of any project to decide on what you want. Some of the most important aspects of a building are often considered so late in the design process that they cannot be incorporated properly. This is particularly true of insulation and this translates into target U-values. ~~These~~ should be clearly set as should air tightness targets. So often the minimum standards allowed by the building regulations are taken on as ~~what to aim at~~; yet within a very few years these have changed. A target U-values of as close to 0.1 and airtightness of less than one are not at all unreasonable.	+	It is very important at the outset of any project to decide on what you want. Some of the most important aspects of a building are often considered so late in the design process that they cannot be incorporated properly. This is particularly true of insulation and this translates into target U-values which in turn translate into wall thicknesses and can preclude some design features. The target U-values should be clearly set as should air tightness targets. So often the minimum standards that are allowed by the building regulations are taken on as acceptable; yet within a very few years these have changed. A target U-values of as close to 0.1 and airtightness of less than one are not at all unreasonable.

	[[Category:Articles_needing_more_work]]		[[Category:Articles_needing_more_work]]

Tony C at 19:46, 1 October 2014

2014-10-01T19:46:23Z

← Older revision		Revision as of 19:46, 1 October 2014
Line 1:		Line 1:
−	~~<p>~~	+
−	It is very important at the outset to decide on what you want. Some of the most important aspects of a building are often considered so late in the design process that they cannot be incorporated.~~<br />~~	+	It is very important at the outset of any project to decide on what you want. Some of the most important aspects of a building are often considered so late in the design process that they cannot be incorporated properly. This is particularly true of insulation and this translates into target U-values. These should be clearly set as should air tightness targets. So often the minimum standards allowed by the building regulations are taken on as what to aim at; yet within a very few years these have changed. A target U-values of as close to 0.1 and airtightness of less than one are not at all unreasonable.
−	~~Insulation levels translate~~ into target U-values ~~and these~~ should be clearly set as should air tightness targets. So often minimum standards ~~set~~ by the building regulations are taken on ~~board~~ as what to aim at.; yet within a very few years these have changed. ~~Target~~ U-values of 0.1~~</p>~~	+
−	~~<p>~~	+
−	~~Article still in draft form </p>~~	+

	[[Category:Articles_needing_more_work]]		[[Category:Articles_needing_more_work]]

Tony C at 11:42, 1 October 2014

2014-10-01T11:42:44Z

← Older revision		Revision as of 11:42, 1 October 2014
Line 1:		Line 1:
−		+	<p>
−	It is very important at the outset to decide on what you want. Some of the most important aspects of a building are often considered so late in the design process that they cannot be incorporated.	+	It is very important at the outset to decide on what you want. Some of the most important aspects of a building are often considered so late in the design process that they cannot be incorporated.<br />
−		+	Insulation levels translate into target U-values and these should be clearly set as should air tightness targets. So often minimum standards set by the building regulations are taken on board as what to aim at.; yet within a very few years these have changed. Target U-values of 0.1</p>
−	<br/>	+	<p>
−		+	Article still in draft form </p>
−	Insulation levels translate into target U-values and these should be clearly set ~~and so~~ should air tightness targets. So often minimum standards set by building regulations are ~~use~~ as ~~the thing~~ to do yet within a very few years these have changed. Target U-values of 0.1	+
−		+
−	Article still in draft form	+

	[[Category:Articles_needing_more_work]]		[[Category:Articles_needing_more_work]]

Tony C: Created page with " It is very important at the outset to decide on what you want. Some of the most important aspects of a building are often considered so late in the design process that they cann..."

2014-10-01T08:01:05Z

Created page with " It is very important at the outset to decide on what you want. Some of the most important aspects of a building are often considered so late in the design process that they cann..."

New page

It is very important at the outset to decide on what you want. Some of the most important aspects of a building are often considered so late in the design process that they cannot be incorporated.

<br/>

Insulation levels translate into target U-values and these should be clearly set and so should air tightness targets. So often minimum standards set by building regulations are use as the thing to do yet within a very few years these have changed. Target U-values of 0.1

Article still in draft form

[[Category:Articles_needing_more_work]]