Concrete gridshells - Revision history

Designing Buildings at 09:48, 16 January 2023

2023-01-16T09:48:56Z

← Older revision		Revision as of 09:48, 16 January 2023
Line 1:		Line 1:
−	It is arguable if the term gridshell, which describes structures acting in tension should be applied to concrete structures, as they primarily act in compression, but there are a number of examples that are historically referred to as or bear a relationships to gridshells. In turn as the structural capabilities of concrete as a composite material developed with fibre reinforcement its ability to act in tension improved.	+	It is arguable if the term gridshell, which describes grid structures acting in tension (such as timber gridshells), should be applied to concrete structures, as they primarily act in compression, but there are a number of examples that are historically referred to as, or bear a relationships to, gridshells. In turn as the structural capabilities of concrete as a composite material have developed with fibre reinforcement its ability to act in tension has also improved.

−	A catenary curve in physics and geometry, is the ~~same~~ curve created by self weight when a hanging a chain is supported only at its ends~~, often not at the same height~~, which bears a relationship to the forms created by gridshells, only ~~in reverse~~. Antoni Gaudi used hanging chain models to find optimal shapes for his designs of La Sagrada di Fagmilia ~~which he started in 1882~~, whilst the contemporary architect often associated with this construction approach, Frei Otto also used hanging chains to study the optimal shapes for his gridshells.	+	A catenary curve in physics and geometry, is the curve created by self weight when a hanging a chain is supported only at its ends, which bears a relationship to the forms created by gridshells, (only upside down). Antoni Gaudi used hanging chain models to find the optimal shapes for his designs such as for La Sagrada di Fagmilia, whilst the contemporary architect often associated with this construction approach, Frei Otto also used hanging chains to study the optimal shapes for his gridshells.

	[[File:Gaudi-Sagrada-Familia_crop.jpg\|link=File:Gaudi-Sagrada-Familia_crop.jpg]]		[[File:Gaudi-Sagrada-Familia_crop.jpg\|link=File:Gaudi-Sagrada-Familia_crop.jpg]]

−	The earliest thin frame concrete structure resembling a gridshell was an icosaedron dome (refined later into what was called a geodesic dome by Buckminster Fuller) it was completed in the 1920's by the physicist Walther Bauersfeld after being approached by Oskar von Miller to build the first projection planetarium. It was patented and built as a test demonstration on the roof of the Zeiss factory in Jena by Dykerhoff and Wydmann, the shell structure was created effectively as a formwork and the final structure which when complete was only six centimeters thick, with a diameter of 25 metres, it was the first of its kind.	+	The earliest thin frame concrete structure resembling a gridshell was an icosaedron dome (refined later into what was called a geodesic dome by Buckminster Fuller). It was completed in the 1920's by the physicist Walther Bauersfeld after being approached by Oskar von Miller to build the first projection planetarium. It was patented and built as a test demonstration on the roof of the Zeiss factory in Jena by Dykerhoff and Wydmann, the shell structure was created effectively as a formwork and the final structure, which when complete was only six centimeters thick, with a diameter of 25 metres, was the first of its kind.

	[[File:Planetarium_zeiss_germany.jpg\|link=File:Planetarium_zeiss_germany.jpg]]		[[File:Planetarium_zeiss_germany.jpg\|link=File:Planetarium_zeiss_germany.jpg]]

−	From around the 1920's a number of architects and engineers made developments in the use of thin-shell concrete construction, which, because of its structural efficiency, included the use of of gridshells. Possibly the ~~most~~ known of these was the ~~italian~~ engineer Pier Luigi Nervi, whose designs started to employ shells ~~around~~ the 1950's starting with the 61 metre ribbed concrete shell dome of the Palazzetto dello Sport in Rome, designed by Architect Annibale Vitellozzi whilst he was under the direction of Engineer Giacomo Maccagno.	+	From around the 1920's a number of architects and engineers made developments in the use of thin-shell concrete construction, which, because of its structural efficiency, included the use of of gridshells. Possibly the best known of these was the Italian engineer Pier Luigi Nervi, whose designs started to employ shells in the 1950's starting with the 61 metre ribbed concrete shell dome of the Palazzetto dello Sport in Rome, designed by Architect Annibale Vitellozzi whilst he was under the direction of Engineer Giacomo Maccagno.

−	This low pitch ribbed dome is braced by concrete flying buttresses on which lie prefabricated concrete panels~~, it~~ was mostly prefabricated in parts and only took 40 ~~daysto~~ be erected~~, it~~ was arguably not ~~some~~ much a gridshell structure as a shell structure. The similar shell structure of the Norfolk Scope Arena in Virginia took its inspiration from the earlier building in Rome and was built in 1971's by the same engineer but with double the diameter. In the same year Nervi completed the roof structure of the Paul VI audience hall in Vatican City which was significantly different and started to resemble the fine structural balance associated with gridshells.	+	This low pitch ribbed dome is braced by concrete flying buttresses on which lie prefabricated concrete panels. It was mostly prefabricated in parts and only took 40 days to be erected. It was arguably not so much a gridshell structure as a shell structure.
		+
		+	The similar shell structure of the Norfolk Scope Arena in Virginia took its inspiration from the earlier building in Rome and was built in 1971 by the same engineer but with double the diameter. In the same year Nervi completed the roof structure of the Paul VI audience hall in Vatican City which was significantly different and started to resemble the fine structural balance associated with gridshells.

	[[File:Palazzetoo_rome_and_Norfolk_nervi.jpg\|link=File:Palazzetoo_rome_and_Norfolk_nervi.jpg]]		[[File:Palazzetoo_rome_and_Norfolk_nervi.jpg\|link=File:Palazzetoo_rome_and_Norfolk_nervi.jpg]]

−	Other proponents of thin structure concrete shell frames ~~were~~ Félix Candela Outeriño working in Spain and Mexico on curved flying structures, or cascarones, from the small pavilion of cosmic rays in 1951 to the hotel casino de la Selva, in Cuernavaca, Mexico. In the late 60's and with the growth of steel as a building material he went on to design the large span ribbed gridshell of the Palacio de los Deportes, in Mexico City for the summer ~~olympics (see steel section)~~ with Enrique Castañeda Tamborel and Antonio Peyri.	+	Other proponents of thin structure concrete shell frames included Félix Candela Outeriño working in Spain and Mexico on curved flying structures, or cascarones, from the small pavilion of cosmic rays in 1951 to the hotel casino de la Selva, in Cuernavaca, Mexico. In the late 60's and with the growth of steel as a building material he went on to design the large span ribbed gridshell of the Palacio de los Deportes, in Mexico City for the summer Olympics with Enrique Castañeda Tamborel and Antonio Peyri.

	Finally and towards the latter period of development Heinz Isler's buildings expanded this typology from the concrete shell roof in Wyss in Zuchwil, (1962), Kilcher in Recherswil, (1965), Deitingen south, triangle concrete cupola roofs, (1968) and later published a number of reports including the Structural Beauty of Shells and the Effective Use of Concrete in the early 80's.		Finally and towards the latter period of development Heinz Isler's buildings expanded this typology from the concrete shell roof in Wyss in Zuchwil, (1962), Kilcher in Recherswil, (1965), Deitingen south, triangle concrete cupola roofs, (1968) and later published a number of reports including the Structural Beauty of Shells and the Effective Use of Concrete in the early 80's.

Editor at 22:49, 18 October 2022

2022-10-18T22:49:56Z

← Older revision		Revision as of 22:49, 18 October 2022
Line 19:		Line 19:
	Finally and towards the latter period of development Heinz Isler's buildings expanded this typology from the concrete shell roof in Wyss in Zuchwil, (1962), Kilcher in Recherswil, (1965), Deitingen south, triangle concrete cupola roofs, (1968) and later published a number of reports including the Structural Beauty of Shells and the Effective Use of Concrete in the early 80's.		Finally and towards the latter period of development Heinz Isler's buildings expanded this typology from the concrete shell roof in Wyss in Zuchwil, (1962), Kilcher in Recherswil, (1965), Deitingen south, triangle concrete cupola roofs, (1968) and later published a number of reports including the Structural Beauty of Shells and the Effective Use of Concrete in the early 80's.

−	Although Glass Fibre Reinforced Polymers and Plastics (GFRP) were first invented in the 30's, whilst Glass Fibre Reinforced Concrete (GFRC or GRC) was invented in Russia in the 1940's, for the latter, it wasn't until the 1970's that it came into widespread use in buildings, with the former much later. The introduction of these materials in effect gave new possibilities for the strength of the skins that clad gridshell, or the in another way the gridshells became an integral part of a single material.	+	Although Glass Fibre Reinforced Polymers and Plastics (GRP & GFRP) were first invented in the 30's, whilst Glass Fibre Reinforced Concrete (GFRC or GRC) was invented in Russia in the 1940's, for the latter, it wasn't until the 1970's that it came into widespread use in buildings, with the former much later. The introduction of these materials in effect gave new possibilities for the strength of the skins that clad gridshell, or the in another way the gridshells became an integral part of a single material.

−	~~For more information visits our relevant pages highlighted above~~.	+	= Related articles on Designing Buildings =
		+
		+	* Gridshells
		+	* Glass reinforced concrete
		+	* Concrete
		+	* Carbon fibre.
		+	* Composites.
		+	* Glass fibre.
		+	* Glass reinforced plastic GRP.
		+	* Graphene-reinforced concrete.
		+	* Reinforced concrete.
		+
		+	[[Category:DCN_Commentary]] [[Category:DCN_Product_Knowledge]] [[Category:Definitions]] [[Category:Projects_and_case_studies]]

Editor at 22:43, 18 October 2022

2022-10-18T22:43:59Z

← Older revision		Revision as of 22:43, 18 October 2022
Line 19:		Line 19:
	Finally and towards the latter period of development Heinz Isler's buildings expanded this typology from the concrete shell roof in Wyss in Zuchwil, (1962), Kilcher in Recherswil, (1965), Deitingen south, triangle concrete cupola roofs, (1968) and later published a number of reports including the Structural Beauty of Shells and the Effective Use of Concrete in the early 80's.		Finally and towards the latter period of development Heinz Isler's buildings expanded this typology from the concrete shell roof in Wyss in Zuchwil, (1962), Kilcher in Recherswil, (1965), Deitingen south, triangle concrete cupola roofs, (1968) and later published a number of reports including the Structural Beauty of Shells and the Effective Use of Concrete in the early 80's.

−	Although Glass Fibre Reinforced Concrete (GFRC or ~~GFC~~) was ~~first~~ invented in Russia in the 1940, it wasn't until the 1970's that ~~the current form~~ came into widespread use ~~for building façades~~, ~~this changed~~ the ~~nature~~ of ~~the need~~ for gridshells.	+	Although Glass Fibre Reinforced Polymers and Plastics (GFRP) were first invented in the 30's, whilst Glass Fibre Reinforced Concrete (GFRC or GRC) was invented in Russia in the 1940's, for the latter, it wasn't until the 1970's that it came into widespread use in buildings, with the former much later. The introduction of these materials in effect gave new possibilities for the strength of the skins that clad gridshell, or the in another way the gridshells became an integral part of a single material.
		+
		+	For more information visits our relevant pages highlighted above.

Editor at 19:01, 18 October 2022

2022-10-18T19:01:15Z

← Older revision		Revision as of 19:01, 18 October 2022
Line 3:		Line 3:
	A catenary curve in physics and geometry, is the same curve created by self weight when a hanging a chain is supported only at its ends, often not at the same height, which bears a relationship to the forms created by gridshells, only in reverse. Antoni Gaudi used hanging chain models to find optimal shapes for his designs of La Sagrada di Fagmilia which he started in 1882, whilst the contemporary architect often associated with this construction approach, Frei Otto also used hanging chains to study the optimal shapes for his gridshells.		A catenary curve in physics and geometry, is the same curve created by self weight when a hanging a chain is supported only at its ends, often not at the same height, which bears a relationship to the forms created by gridshells, only in reverse. Antoni Gaudi used hanging chain models to find optimal shapes for his designs of La Sagrada di Fagmilia which he started in 1882, whilst the contemporary architect often associated with this construction approach, Frei Otto also used hanging chains to study the optimal shapes for his gridshells.

−	[[File:Gaudi-Sagrada-~~Familia crop~~.jpg]]	+	[[File:Gaudi-Sagrada-Familia_crop.jpg\|link=File:Gaudi-Sagrada-Familia_crop.jpg]]

	The earliest thin frame concrete structure resembling a gridshell was an icosaedron dome (refined later into what was called a geodesic dome by Buckminster Fuller) it was completed in the 1920's by the physicist Walther Bauersfeld after being approached by Oskar von Miller to build the first projection planetarium. It was patented and built as a test demonstration on the roof of the Zeiss factory in Jena by Dykerhoff and Wydmann, the shell structure was created effectively as a formwork and the final structure which when complete was only six centimeters thick, with a diameter of 25 metres, it was the first of its kind.		The earliest thin frame concrete structure resembling a gridshell was an icosaedron dome (refined later into what was called a geodesic dome by Buckminster Fuller) it was completed in the 1920's by the physicist Walther Bauersfeld after being approached by Oskar von Miller to build the first projection planetarium. It was patented and built as a test demonstration on the roof of the Zeiss factory in Jena by Dykerhoff and Wydmann, the shell structure was created effectively as a formwork and the final structure which when complete was only six centimeters thick, with a diameter of 25 metres, it was the first of its kind.

−	[[File:~~Planetarium zeiss germany~~.jpg]]	+	[[File:Planetarium_zeiss_germany.jpg\|link=File:Planetarium_zeiss_germany.jpg]]

	From around the 1920's a number of architects and engineers made developments in the use of thin-shell concrete construction, which, because of its structural efficiency, included the use of of gridshells. Possibly the most known of these was the italian engineer Pier Luigi Nervi, whose designs started to employ shells around the 1950's starting with the 61 metre ribbed concrete shell dome of the Palazzetto dello Sport in Rome, designed by Architect Annibale Vitellozzi whilst he was under the direction of Engineer Giacomo Maccagno.		From around the 1920's a number of architects and engineers made developments in the use of thin-shell concrete construction, which, because of its structural efficiency, included the use of of gridshells. Possibly the most known of these was the italian engineer Pier Luigi Nervi, whose designs started to employ shells around the 1950's starting with the 61 metre ribbed concrete shell dome of the Palazzetto dello Sport in Rome, designed by Architect Annibale Vitellozzi whilst he was under the direction of Engineer Giacomo Maccagno.
Line 13:		Line 13:
	This low pitch ribbed dome is braced by concrete flying buttresses on which lie prefabricated concrete panels, it was mostly prefabricated in parts and only took 40 daysto be erected, it was arguably not some much a gridshell structure as a shell structure. The similar shell structure of the Norfolk Scope Arena in Virginia took its inspiration from the earlier building in Rome and was built in 1971's by the same engineer but with double the diameter. In the same year Nervi completed the roof structure of the Paul VI audience hall in Vatican City which was significantly different and started to resemble the fine structural balance associated with gridshells.		This low pitch ribbed dome is braced by concrete flying buttresses on which lie prefabricated concrete panels, it was mostly prefabricated in parts and only took 40 daysto be erected, it was arguably not some much a gridshell structure as a shell structure. The similar shell structure of the Norfolk Scope Arena in Virginia took its inspiration from the earlier building in Rome and was built in 1971's by the same engineer but with double the diameter. In the same year Nervi completed the roof structure of the Paul VI audience hall in Vatican City which was significantly different and started to resemble the fine structural balance associated with gridshells.

−	[[File:~~Palazzetoo rome and Norfolk nervi~~.jpg]]	+	[[File:Palazzetoo_rome_and_Norfolk_nervi.jpg\|link=File:Palazzetoo_rome_and_Norfolk_nervi.jpg]]
		+
		+	Other proponents of thin structure concrete shell frames were Félix Candela Outeriño working in Spain and Mexico on curved flying structures, or cascarones, from the small pavilion of cosmic rays in 1951 to the hotel casino de la Selva, in Cuernavaca, Mexico. In the late 60's and with the growth of steel as a building material he went on to design the large span ribbed gridshell of the Palacio de los Deportes, in Mexico City for the summer olympics (see steel section) with Enrique Castañeda Tamborel and Antonio Peyri.
		+
		+	Finally and towards the latter period of development Heinz Isler's buildings expanded this typology from the concrete shell roof in Wyss in Zuchwil, (1962), Kilcher in Recherswil, (1965), Deitingen south, triangle concrete cupola roofs, (1968) and later published a number of reports including the Structural Beauty of Shells and the Effective Use of Concrete in the early 80's.
		+
		+	Although Glass Fibre Reinforced Concrete (GFRC or GFC) was first invented in Russia in the 1940, it wasn't until the 1970's that the current form came into widespread use for building façades, this changed the nature of the need for gridshells.

Editor at 18:55, 18 October 2022

2022-10-18T18:55:50Z

← Older revision		Revision as of 18:55, 18 October 2022
Line 3:		Line 3:
	A catenary curve in physics and geometry, is the same curve created by self weight when a hanging a chain is supported only at its ends, often not at the same height, which bears a relationship to the forms created by gridshells, only in reverse. Antoni Gaudi used hanging chain models to find optimal shapes for his designs of La Sagrada di Fagmilia which he started in 1882, whilst the contemporary architect often associated with this construction approach, Frei Otto also used hanging chains to study the optimal shapes for his gridshells.		A catenary curve in physics and geometry, is the same curve created by self weight when a hanging a chain is supported only at its ends, often not at the same height, which bears a relationship to the forms created by gridshells, only in reverse. Antoni Gaudi used hanging chain models to find optimal shapes for his designs of La Sagrada di Fagmilia which he started in 1882, whilst the contemporary architect often associated with this construction approach, Frei Otto also used hanging chains to study the optimal shapes for his gridshells.

−	The earliest thin frame concrete structure resembling a gridshell was an icosaedron dome (refined later into what was called a geodesic dome by Buckminster Fuller) it was completed in the 1920's by the physicist Walther Bauersfeld after being approached by Oskar von Miller to build the first projection planetarium. It was patented and built as a test demonstration on the roof of the Zeiss factory in Jena by Dykerhoff and Wydmann, the ~~shells~~ structure was created effectively as a formwork and the final structure was only six centimeters thick, with a diameter of 25 metres, it was the first of its kind.	+	[[File:Gaudi-Sagrada-Familia crop.jpg]]
		+
		+	The earliest thin frame concrete structure resembling a gridshell was an icosaedron dome (refined later into what was called a geodesic dome by Buckminster Fuller) it was completed in the 1920's by the physicist Walther Bauersfeld after being approached by Oskar von Miller to build the first projection planetarium. It was patented and built as a test demonstration on the roof of the Zeiss factory in Jena by Dykerhoff and Wydmann, the shell structure was created effectively as a formwork and the final structure which when complete was only six centimeters thick, with a diameter of 25 metres, it was the first of its kind.
		+
		+	[[File:Planetarium zeiss germany.jpg]]

	From around the 1920's a number of architects and engineers made developments in the use of thin-shell concrete construction, which, because of its structural efficiency, included the use of of gridshells. Possibly the most known of these was the italian engineer Pier Luigi Nervi, whose designs started to employ shells around the 1950's starting with the 61 metre ribbed concrete shell dome of the Palazzetto dello Sport in Rome, designed by Architect Annibale Vitellozzi whilst he was under the direction of Engineer Giacomo Maccagno.		From around the 1920's a number of architects and engineers made developments in the use of thin-shell concrete construction, which, because of its structural efficiency, included the use of of gridshells. Possibly the most known of these was the italian engineer Pier Luigi Nervi, whose designs started to employ shells around the 1950's starting with the 61 metre ribbed concrete shell dome of the Palazzetto dello Sport in Rome, designed by Architect Annibale Vitellozzi whilst he was under the direction of Engineer Giacomo Maccagno.

	This low pitch ribbed dome is braced by concrete flying buttresses on which lie prefabricated concrete panels, it was mostly prefabricated in parts and only took 40 daysto be erected, it was arguably not some much a gridshell structure as a shell structure. The similar shell structure of the Norfolk Scope Arena in Virginia took its inspiration from the earlier building in Rome and was built in 1971's by the same engineer but with double the diameter. In the same year Nervi completed the roof structure of the Paul VI audience hall in Vatican City which was significantly different and started to resemble the fine structural balance associated with gridshells.		This low pitch ribbed dome is braced by concrete flying buttresses on which lie prefabricated concrete panels, it was mostly prefabricated in parts and only took 40 daysto be erected, it was arguably not some much a gridshell structure as a shell structure. The similar shell structure of the Norfolk Scope Arena in Virginia took its inspiration from the earlier building in Rome and was built in 1971's by the same engineer but with double the diameter. In the same year Nervi completed the roof structure of the Paul VI audience hall in Vatican City which was significantly different and started to resemble the fine structural balance associated with gridshells.
		+
		+	[[File:Palazzetoo rome and Norfolk nervi.jpg]]

Editor at 18:38, 18 October 2022

2022-10-18T18:38:53Z

← Older revision		Revision as of 18:38, 18 October 2022
Line 3:		Line 3:
	A catenary curve in physics and geometry, is the same curve created by self weight when a hanging a chain is supported only at its ends, often not at the same height, which bears a relationship to the forms created by gridshells, only in reverse. Antoni Gaudi used hanging chain models to find optimal shapes for his designs of La Sagrada di Fagmilia which he started in 1882, whilst the contemporary architect often associated with this construction approach, Frei Otto also used hanging chains to study the optimal shapes for his gridshells.		A catenary curve in physics and geometry, is the same curve created by self weight when a hanging a chain is supported only at its ends, often not at the same height, which bears a relationship to the forms created by gridshells, only in reverse. Antoni Gaudi used hanging chain models to find optimal shapes for his designs of La Sagrada di Fagmilia which he started in 1882, whilst the contemporary architect often associated with this construction approach, Frei Otto also used hanging chains to study the optimal shapes for his gridshells.

−	The earliest thin frame concrete structure resembling a gridshell was an icosaedron dome (refined later into what was called a geodesic dome by Buckminster Fuller) it was completed in the 1920's by the physicist Walther Bauersfeld after being approached by Oskar von Miller to build the first projection planetarium. It was patented and built as a test demonstration on the roof of the Zeiss factory in Jena by Dykerhoff and Wydmann, only six centimeters thick ~~and~~ with a diameter of 25 metres, it was the first of its kind.	+	The earliest thin frame concrete structure resembling a gridshell was an icosaedron dome (refined later into what was called a geodesic dome by Buckminster Fuller) it was completed in the 1920's by the physicist Walther Bauersfeld after being approached by Oskar von Miller to build the first projection planetarium. It was patented and built as a test demonstration on the roof of the Zeiss factory in Jena by Dykerhoff and Wydmann, the shells structure was created effectively as a formwork and the final structure was only six centimeters thick, with a diameter of 25 metres, it was the first of its kind.

	From around the 1920's a number of architects and engineers made developments in the use of thin-shell concrete construction, which, because of its structural efficiency, included the use of of gridshells. Possibly the most known of these was the italian engineer Pier Luigi Nervi, whose designs started to employ shells around the 1950's starting with the 61 metre ribbed concrete shell dome of the Palazzetto dello Sport in Rome, designed by Architect Annibale Vitellozzi whilst he was under the direction of Engineer Giacomo Maccagno.		From around the 1920's a number of architects and engineers made developments in the use of thin-shell concrete construction, which, because of its structural efficiency, included the use of of gridshells. Possibly the most known of these was the italian engineer Pier Luigi Nervi, whose designs started to employ shells around the 1950's starting with the 61 metre ribbed concrete shell dome of the Palazzetto dello Sport in Rome, designed by Architect Annibale Vitellozzi whilst he was under the direction of Engineer Giacomo Maccagno.

	This low pitch ribbed dome is braced by concrete flying buttresses on which lie prefabricated concrete panels, it was mostly prefabricated in parts and only took 40 daysto be erected, it was arguably not some much a gridshell structure as a shell structure. The similar shell structure of the Norfolk Scope Arena in Virginia took its inspiration from the earlier building in Rome and was built in 1971's by the same engineer but with double the diameter. In the same year Nervi completed the roof structure of the Paul VI audience hall in Vatican City which was significantly different and started to resemble the fine structural balance associated with gridshells.		This low pitch ribbed dome is braced by concrete flying buttresses on which lie prefabricated concrete panels, it was mostly prefabricated in parts and only took 40 daysto be erected, it was arguably not some much a gridshell structure as a shell structure. The similar shell structure of the Norfolk Scope Arena in Virginia took its inspiration from the earlier building in Rome and was built in 1971's by the same engineer but with double the diameter. In the same year Nervi completed the roof structure of the Paul VI audience hall in Vatican City which was significantly different and started to resemble the fine structural balance associated with gridshells.

Editor at 18:23, 18 October 2022

2022-10-18T18:23:18Z

← Older revision		Revision as of 18:23, 18 October 2022
Line 5:		Line 5:
	The earliest thin frame concrete structure resembling a gridshell was an icosaedron dome (refined later into what was called a geodesic dome by Buckminster Fuller) it was completed in the 1920's by the physicist Walther Bauersfeld after being approached by Oskar von Miller to build the first projection planetarium. It was patented and built as a test demonstration on the roof of the Zeiss factory in Jena by Dykerhoff and Wydmann, only six centimeters thick and with a diameter of 25 metres, it was the first of its kind.		The earliest thin frame concrete structure resembling a gridshell was an icosaedron dome (refined later into what was called a geodesic dome by Buckminster Fuller) it was completed in the 1920's by the physicist Walther Bauersfeld after being approached by Oskar von Miller to build the first projection planetarium. It was patented and built as a test demonstration on the roof of the Zeiss factory in Jena by Dykerhoff and Wydmann, only six centimeters thick and with a diameter of 25 metres, it was the first of its kind.

−	From around the 1920's a number of architects and engineers made developments in the use of thin-shell concrete construction, which, because of its structural efficiency, included the use of of gridshells. Possibly the most known of these was the italian engineer Pier Luigi Nervi, whose designs started to employ shells around the 1950's starting with the 61 metre ribbed concrete shell dome of the Palazzetto dello Sport in Rome, ~~Italy to~~ the ~~Paul VI audience hall~~ in ~~Vatican City to~~ the Norfolk Scope Arena in ~~Norfolk,~~ Virginia in the 70's.	+	From around the 1920's a number of architects and engineers made developments in the use of thin-shell concrete construction, which, because of its structural efficiency, included the use of of gridshells. Possibly the most known of these was the italian engineer Pier Luigi Nervi, whose designs started to employ shells around the 1950's starting with the 61 metre ribbed concrete shell dome of the Palazzetto dello Sport in Rome, designed by Architect Annibale Vitellozzi whilst he was under the direction of Engineer Giacomo Maccagno.
		+
		+	This low pitch ribbed dome is braced by concrete flying buttresses on which lie prefabricated concrete panels, it was mostly prefabricated in parts and only took 40 daysto be erected, it was arguably not some much a gridshell structure as a shell structure. The similar shell structure of the Norfolk Scope Arena in Virginia took its inspiration from the earlier building in Rome and was built in 1971's by the same engineer but with double the diameter. In the same year Nervi completed the roof structure of the Paul VI audience hall in Vatican City which was significantly different and started to resemble the fine structural balance associated with gridshells.

Editor: Created page with "It is arguable if the term gridshell, which describes structures acting in tension should be applied to concrete structures, as they primarily act in compression, but there are a..."

2022-10-18T18:03:00Z

Created page with "It is arguable if the term gridshell, which describes structures acting in tension should be applied to concrete structures, as they primarily act in compression, but there are a..."

New page

It is arguable if the term gridshell, which describes structures acting in tension should be applied to concrete structures, as they primarily act in compression, but there are a number of examples that are historically referred to as or bear a relationships to gridshells. In turn as the structural capabilities of concrete as a composite material developed with fibre reinforcement its ability to act in tension improved.

A catenary curve in physics and geometry, is the same curve created by self weight when a hanging a chain is supported only at its ends, often not at the same height, which bears a relationship to the forms created by gridshells, only in reverse. Antoni Gaudi used hanging chain models to find optimal shapes for his designs of La Sagrada di Fagmilia which he started in 1882, whilst the contemporary architect often associated with this construction approach, Frei Otto also used hanging chains to study the optimal shapes for his gridshells.

The earliest thin frame concrete structure resembling a gridshell was an icosaedron dome (refined later into what was called a geodesic dome by Buckminster Fuller) it was completed in the 1920's by the physicist Walther Bauersfeld after being approached by Oskar von Miller to build the first projection planetarium. It was patented and built as a test demonstration on the roof of the Zeiss factory in Jena by Dykerhoff and Wydmann, only six centimeters thick and with a diameter of 25 metres, it was the first of its kind.

From around the 1920's a number of architects and engineers made developments in the use of thin-shell concrete construction, which, because of its structural efficiency, included the use of of gridshells. Possibly the most known of these was the italian engineer Pier Luigi Nervi, whose designs started to employ shells around the 1950's starting with the 61 metre ribbed concrete shell dome of the Palazzetto dello Sport in Rome, Italy to the Paul VI audience hall in Vatican City to the Norfolk Scope Arena in Norfolk, Virginia in the 70's.