Characteristics Of Ceramic Tiles - Revision history

Editor: Reverted edits by Priyasharma (talk) to last revision by Editor

2021-06-08T10:13:01Z

Reverted edits by Priyasharma (talk) to last revision by Editor

← Older revision		Revision as of 10:13, 8 June 2021
Line 1:		Line 1:
−	~~Resistance to temperature and humidity~~: [~~https://groupofmetro.com/~~ Ceramic tiles] must be resistant to sudden changes in temperature (thermal shock), negative temperatures (resistance to frost) and changes in size under the influence of humidity. Otherwise, under the influence of the above factors on the mass and on the glaze of the tile, stresses may arise that can lead to the crackling of the glaze, or its chipping, detachment of the tiles from the base and even damage to them. Cracking is an "obvious" defect, that is, visible and sometimes "hidden", that appears some time after installation. In the second case, the cause of the defect may be the absence of "cracks" or errors during installation, for example, too thick a layer of cement or glue. Only frost resistant tiles can be used outdoors.	+	#Redirect:[[Ceramic_tiles\|Ceramic tiles]]
−		+
−	Flexural strength: this parameter determines at what maximum stress the tile breaks. It is extremely important for tiles, which are subjected to heavy loads during operation, but also for wall tiles, which can be damaged during transportation and installation, and on the wall can be subjected to stresses caused by movements of the walls of the building. .	+
−		+
−	The surface properties are resistant to scratches and wear during operation. The tiles must be particularly resistant to mechanical factors. Hardness, that is, scratch resistance is given on the Mohs scale. Abrasion resistance determines how the tile behaves when exposed to abrasive factors.	+
−		+
−	~~Abrasion classes:~~	+
−		+
−	~~1 - the product is recommended for home environments with little traffic, such as a bathroom,~~	+
−		+
−	~~2 - the product is recommended for domestic environments with low and medium traffic, such as: bathroom, kitchen, living room, hallway, terrace,~~	+
−		+
−	~~3 - the product is recommended for use in places with normal traffic intensity, for example, residential premises, as well as public places,~~	+
−		+
−	~~4 - The use of the product is recommended in places with high traffic intensity, such as shopping centers, passageways and corridors, public places.~~	+
−		+
−	Resistance to chemical factors - most often refers to chemicals used in the home - detergents, laundry, cleaning products, salt, as well as food (coffee, juices, wines) that can stain. Tiles that are resistant to chemical factors cannot change their gloss and color under the influence of these substances, and stains should be easily removed with water or popular detergents.	+
−		+
−	Safety-related properties: the main one is slip resistance, which is very important for tiles intended for floors both in residential premises and in public premises, industrial premises and for external floor coverings. The slip resistance class is designated from R9 to R11: the higher the coefficient, the higher the slip resistance of the tiles.	+
−		+
−	Grinding is the mechanical processing of the edges of tiles, which consists of precisely cutting them to a certain size, usually with an accuracy of + - 0.2mm. This makes it possible to lay [https://reyaimpex.com/digital-floor-tiles floor tiles] ~~with smaller joint widths (generally at least 1mm).~~	+

	[[Category:Education]]		[[Category:Education]]

Priyasharma at 09:53, 8 June 2021

2021-06-08T09:53:36Z

← Older revision		Revision as of 09:53, 8 June 2021
Line 1:		Line 1:
		+	Resistance to temperature and humidity: [https://groupofmetro.com/ Ceramic tiles] must be resistant to sudden changes in temperature (thermal shock), negative temperatures (resistance to frost) and changes in size under the influence of humidity. Otherwise, under the influence of the above factors on the mass and on the glaze of the tile, stresses may arise that can lead to the crackling of the glaze, or its chipping, detachment of the tiles from the base and even damage to them. Cracking is an "obvious" defect, that is, visible and sometimes "hidden", that appears some time after installation. In the second case, the cause of the defect may be the absence of "cracks" or errors during installation, for example, too thick a layer of cement or glue. Only frost resistant tiles can be used outdoors.

		+	Flexural strength: this parameter determines at what maximum stress the tile breaks. It is extremely important for tiles, which are subjected to heavy loads during operation, but also for wall tiles, which can be damaged during transportation and installation, and on the wall can be subjected to stresses caused by movements of the walls of the building. .
		+
		+	The surface properties are resistant to scratches and wear during operation. The tiles must be particularly resistant to mechanical factors. Hardness, that is, scratch resistance is given on the Mohs scale. Abrasion resistance determines how the tile behaves when exposed to abrasive factors.
		+
		+	Abrasion classes:
		+
		+	1 - the product is recommended for home environments with little traffic, such as a bathroom,
		+
		+	2 - the product is recommended for domestic environments with low and medium traffic, such as: bathroom, kitchen, living room, hallway, terrace,
		+
		+	3 - the product is recommended for use in places with normal traffic intensity, for example, residential premises, as well as public places,
		+
		+	4 - The use of the product is recommended in places with high traffic intensity, such as shopping centers, passageways and corridors, public places.
		+
		+	Resistance to chemical factors - most often refers to chemicals used in the home - detergents, laundry, cleaning products, salt, as well as food (coffee, juices, wines) that can stain. Tiles that are resistant to chemical factors cannot change their gloss and color under the influence of these substances, and stains should be easily removed with water or popular detergents.
		+
		+	Safety-related properties: the main one is slip resistance, which is very important for tiles intended for floors both in residential premises and in public premises, industrial premises and for external floor coverings. The slip resistance class is designated from R9 to R11: the higher the coefficient, the higher the slip resistance of the tiles.
		+
		+	Grinding is the mechanical processing of the edges of tiles, which consists of precisely cutting them to a certain size, usually with an accuracy of + - 0.2mm. This makes it possible to lay [https://reyaimpex.com/digital-floor-tiles floor tiles] with smaller joint widths (generally at least 1mm).

	[[Category:Education]]		[[Category:Education]]

Priyasharma at 09:45, 8 June 2021

2021-06-08T09:45:08Z

← Older revision		Revision as of 09:45, 8 June 2021
Line 1:		Line 1:
−	~~#Redirect:[[Ceramic_tiles\|Ceramic tiles]]~~	+

	[[Category:Education]]		[[Category:Education]]

Editor: Redirected page to Ceramic tiles

2021-05-24T16:36:41Z

Redirected page to Ceramic tiles

← Older revision		Revision as of 16:36, 24 May 2021
Line 1:		Line 1:
−	~~== Hera Are The Characteristics Of Ceramic Tiles ==~~	+	#Redirect:[[Ceramic_tiles\|Ceramic tiles]]
−		+
−	~~=== Resistance to temperature and humidity~~: ~~===~~	+
−		+
−	Ceramic tiles must be resistant to sudden changes in temperature (thermal shock), negative temperatures (resistance to frost) and changes in size under the influence of humidity. Otherwise, under the influence of the above factors on the mass and on the glaze of the tile, stresses may arise that can lead to the crackling of the glaze, or its chipping, detachment of the tiles from the base and even damage to them. Cracking is an "obvious" defect, that is, visible and sometimes "hidden", that appears some time after installation. In the second case, the cause of the defect may be the absence of "cracks" or errors during installation, for example, too thick a layer of cement or glue. Only frost resistant tiles can be used outdoors.	+
−		+
−	~~=== Flexural strength: ===~~	+
−		+
−	~~This parameter determines at what maximum stress the tile breaks. It is extremely important for tiles, which are subjected to heavy loads during operation, but also for~~ [https://reyaimpex.com/ceramic-wall-tiles ceramic wall tiles], which can be damaged during transportation and installation, and on the wall can be subjected to stresses caused by movements of the walls of the building. .	+
−		+
−	~~The surface properties are resistant to scratches and wear during operation. The~~ [~~https://groupofmetro.com/ceramic-tiles ceramic~~ tiles] must be particularly resistant to mechanical factors. Hardness, that is, scratch resistance is given on the Mohs scale. Abrasion resistance determines how the tile behaves when exposed to abrasive factors.	+
−		+
−	~~=== Abrasion classes: ===~~	+
−		+
−	~~# The product is recommended for home environments with little traffic, such as a bathroom,~~	+
−	~~# The product is recommended for domestic environments with low and medium traffic, such as: bathroom, kitchen, living room, hallway, terrace,~~	+
−	~~# The product is recommended for use in places with normal traffic intensity, for example, residential premises, as well as public places,~~	+
−	~~# The use of the product is recommended in places with high traffic intensity, such as shopping centers, passageways and corridors, public places.~~	+
−		+
−	~~=== Resistance to chemical factors: ===~~	+
−		+
−	Most often refers to chemicals used in the home - detergents, laundry, cleaning products, salt, as well as food (coffee, juices, wines) that can stain. Tiles that are resistant to chemical factors cannot change their gloss and color under the influence of these substances, and stains should be easily removed with water or popular detergents.	+
−		+
−	~~=== Safety-related properties: ===~~	+
−		+
−	The main one is slip resistance, which is very important for tiles intended for floors both in residential premises and in public premises, industrial premises and for external floor coverings. The slip resistance class is designated from R9 to R11: the higher the coefficient, the higher the slip resistance of the ceramic [https://ilexceramica.com/menu/floor-tiles-ordinary-digital floor tiles].	+
−		+
−	Grinding is the mechanical processing of the edges of Ceramic tiles, which consists of precisely cutting them to a certain size, usually with an accuracy of + - 0.2mm. This makes it possible to lay ground tiles with smaller joint widths (generally at least 1mm).	+

	[[Category:Education]]		[[Category:Education]]

Priyasharma: Created page with "== Hera Are The Characteristics Of Ceramic Tiles == === Resistance to temperature and humidity: === Ceramic tiles must be resistant to sudden changes in temperature (thermal sh..."

2021-05-10T09:49:54Z

Created page with "== Hera Are The Characteristics Of Ceramic Tiles == === Resistance to temperature and humidity: === Ceramic tiles must be resistant to sudden changes in temperature (thermal sh..."

New page

== Hera Are The Characteristics Of Ceramic Tiles ==

=== Resistance to temperature and humidity: ===

Ceramic tiles must be resistant to sudden changes in temperature (thermal shock), negative temperatures (resistance to frost) and changes in size under the influence of humidity. Otherwise, under the influence of the above factors on the mass and on the glaze of the tile, stresses may arise that can lead to the crackling of the glaze, or its chipping, detachment of the tiles from the base and even damage to them. Cracking is an "obvious" defect, that is, visible and sometimes "hidden", that appears some time after installation. In the second case, the cause of the defect may be the absence of "cracks" or errors during installation, for example, too thick a layer of cement or glue. Only frost resistant tiles can be used outdoors.

=== Flexural strength: ===

This parameter determines at what maximum stress the tile breaks. It is extremely important for tiles, which are subjected to heavy loads during operation, but also for [https://reyaimpex.com/ceramic-wall-tiles ceramic wall tiles], which can be damaged during transportation and installation, and on the wall can be subjected to stresses caused by movements of the walls of the building. .

The surface properties are resistant to scratches and wear during operation. The [https://groupofmetro.com/ceramic-tiles ceramic tiles] must be particularly resistant to mechanical factors. Hardness, that is, scratch resistance is given on the Mohs scale. Abrasion resistance determines how the tile behaves when exposed to abrasive factors.

=== Abrasion classes: ===

# The product is recommended for home environments with little traffic, such as a bathroom,
# The product is recommended for domestic environments with low and medium traffic, such as: bathroom, kitchen, living room, hallway, terrace,
# The product is recommended for use in places with normal traffic intensity, for example, residential premises, as well as public places,
# The use of the product is recommended in places with high traffic intensity, such as shopping centers, passageways and corridors, public places.

=== Resistance to chemical factors: ===

Most often refers to chemicals used in the home - detergents, laundry, cleaning products, salt, as well as food (coffee, juices, wines) that can stain. Tiles that are resistant to chemical factors cannot change their gloss and color under the influence of these substances, and stains should be easily removed with water or popular detergents.

=== Safety-related properties: ===

The main one is slip resistance, which is very important for tiles intended for floors both in residential premises and in public premises, industrial premises and for external floor coverings. The slip resistance class is designated from R9 to R11: the higher the coefficient, the higher the slip resistance of the ceramic [https://ilexceramica.com/menu/floor-tiles-ordinary-digital floor tiles].

Grinding is the mechanical processing of the edges of Ceramic tiles, which consists of precisely cutting them to a certain size, usually with an accuracy of + - 0.2mm. This makes it possible to lay ground tiles with smaller joint widths (generally at least 1mm).

[[Category:Education]]