Why do buildings crack? (DG 361)
BRE (Building Research Establishment) is an independent, research-based consultancy, testing and training organisation, operating in the built environment and associated industries.
Why do buildings crack? (DG 361) was first published by BRE in May 1991, and the original content largely remains valid. The current edition was published on 21 August 2014 and includes updated references. It was written by Roger Sadgrove.
Most buildings develop cracks in their fabric, often soon after construction when materials are drying out, but sometimes later. Most early cracking is not structurally significant and is easily repaired. Only rarely does cracking indicate a reduction in structural capacity.
However, diagnosis can be difficult, as every building is unique and several factors may combine to produce a defect. DG 361 examines the causes of cracking in buildings, describes a wide range of potential problems and offers complete solutions to every cracking problem. It is intended to broaden the reader’s understanding of the factors that contribute to cracking and so increase the likelihood of correct diagnosis and remediation.
It provides guidance about how to avoid pitfalls and how to reduce the likelihood of future problems in new buildings.
The contents of the 12 page digest are:
- Introduction.
- Extent of movement.
- The effect of movements: how do cracks occur?
- Diagnosis.
- Temperature changes.
- Initial drying out of moisture and wetting and drying.
- Loss of volatiles.
- Freezing and thawing of absorbed water.
- Subsurface crystallisation of soluble salts.
- Sulfate attack.
- Corrosion or oxidation of steel.
- Moisture expansion of fired clay products.
- Carbonation.
- Alkali silica reaction.
- Hydration of oxides and unstable clinker aggregates.
- Imposed load effects.
- Foundation movement.
- Vibration.
- References.
[edit] Related articles on Designing Buildings Wiki
- BRE articles on Designing Buildings Wiki.
- BRE Buzz articles on Designing Buildings Wiki.
- BRE Buzz.
- Building Research Establishment.
- Burland scale
- Cracking and building movement.
- Cracking in buildings.
- Defects in brickwork.
- Defects in construction.
- Defects in dot and dab.
- Defects in stonework.
- Foundations.
- Ground heave.
- Latent defects.
- Leaning Tower of Pisa.
- Preventing wall collapse.
- Pyrite and mica redress issues in Dail Eireann.
- Repointing.
- Settlement.
- Sinkholes.
- Subsidence.
- Underpinning.
Featured articles and news
Not buildings. Happy holiday from DB.
Improving government projects with data and AI
Enabling better outcomes, efficient modern delivery and influential leadership on government projects.
BSRIA Living Laboratory Innovation Challenge
Final days for submission, closing March 29.
Windows, their frames, forms, factors and functions.
The hidden subtleties of U-Value calculations
Different contexts and what to include as variables.
A brief run down with related articles.
Electrical sector calls for safer public EV charge points
Serious concerns about electrical safety in the public domain.
Building Blocks manifesto presented to parliament
Architects Declare call in for support of five critical policies.
The four elements of project management with APM
Analysis, expectations, collaborative communication and partnerships.
City of London launches Heritage Building Retrofit Toolkit
Empowering owners to initiate necessary adaptations.
Guidance on RAAC in listed buildings
Published by Purcell, endorsed by IHBC, SPAB and C20.
Learning from the past.
Reluctance to hire people with criminal convictions revealed
Employing People with Criminal Convictions Report.
Tackling unconscious bias; Women's History Month
Personal reflections, as the last week of March approaches.