The role of codes, standards and approvals in delivering fire safety
BRE (The Building Research Establishment) is an independent, research-based consultancy, testing and training organisation, operating in the built environment and associated industries.
BRE’s Information Paper, The role of codes, standards and approvals in delivering fire safety (IP 5/16) was written by Sarah Colwell and published by IHS on 7 September 2016.
New and emerging markets bring with them an increasing need to demonstrate compliance with a wide range of codes and standards, and this has the potential to cause confusion between the performance of products when tested and the evidence needed to meet different local requirements.
Traditionally, there have been two types of safety requirements relevant to fire suppression products:
This Information Paper:
- Identifies the processes used to test and approve fire suppression products.
- Discusses the risks of assuming compatibility between different codes and standards.
- Considers the differences between the types of documentary evidence used to support products in the form of test reports compared with third-party certification.
- Discusses the importance of the appropriate design, installation and maintenance of systems, with possibilities for mitigating risks for the building owner or occupier.
It is aimed at specifiers, designers, regulators and manufacturers.
Its contents include:
- Which building codes?
- Selection of design and installation standards.
- Product performance standards.
- Testing.
- Certification.
- CE marking and third-party approval.
- Conclusion.
- References.
[edit] Related articles on Designing Buildings Wiki
- Approved document B.
- BRE articles on Designing Buildings Wiki
- BS EN 3.
- BS 7974.
- BS 9999.
- BS EN 13501-1.
- Building Research Establishment.
- CE marking
- Code of practice.
- Common principles of International Fire Safety Standard introduced.
- Consultation opens for code of practice for fire risk appraisal and assessment of external wall construction.
- Fire blanket.
- Fire detection and alarm system.
- Fire detector.
- Fire performance of external thermal insulation for walls of multistorey buildings, third edition (BR 135).
- Fire protection engineering.
- Fire safety design.
- Fire safety officer.
- Fire suppression.
- Fire.
- Ionisation smoke alarm.
- Joint fire code.
- Managing fire risk in commercial buildings: A guide for facilities managers.
- Optical smoke alarm.
- Smoke detector.
- The causes of false fire alarms in buildings.
- UN approves International Fire Safety Standards common principles.
- Understanding the factors affecting flashover of a fire in modern buildings.
Featured articles and news
Introducing or next Guest Editor Arun Baybars
Practising architect and design panel review member.
Quick summary by size, shape, test, material, use or bonding.
Types of rapidly renewable content
From forestry to agricultural crops and their by-products.
Terraced houses and the public realm
The discernible difference between the public realm of detached housing and of terraced housing.
Put digitalisation and sustainability at the core of curricula
Project management educators are urged.
Looking back at the influence of climate events
From a designer and writer: 'There are limits to growth but no limits to development'.
Terms, histories, theories and practice.
Biophilic design and natural light
Letting in the light and natural elements into spaces.
APM Programme Management Conference 2024
Strategies for Success.
Residential takes the reins as contract awards even out
Contracts down, but remain above the last quarter of 2023.
Celebrating Eid and the largest mud-brick building.
Barry Kingscote claims prestigious CIOB CMYA Award.
The British Mosque: an architectural and social history
The story of some 1,500 mosques or more in Britain.
Heat pump refrigerants, efficiencies and impacts
R12 to R1270 what are the differences?
Global heat pump market in 2023
Challenging times with positive but modest outlook.
Beyond the infrastructure pipeline
Opportunities and chokepoints.